Post by mehmetembedded on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
Hello. I am using TI AM64x evaluation board TMDS64EVM. It has 8 leds connected via I2C to SoC.I wanna control them via codesys GPIO device. Is that possible? If so how I can do it. I had no problem installing codesys runtime, and running program on device. But when it comes to GPIO access, It couldn’t make it.
Last updated: 2024-05-08

Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Thread)}
Linux ARM64 SL, GPIO Access
Last updated: 2024-05-08

Post by yannickasselin on How to sort JSON object in codesys ^{CODESYS Forge talk (Post)}
Just adding: sSubscriberdata := ''; Right before your memcopy should fix the extra characters. It is because your are copying 36 characters into a string which can contain more than 36 characters and there is garbage left in the extra characters. Regarding the parsing of json, I usually build a structure that mirrors the json data and use the available methods in the IIoT library to parse the data and fill the structure.
Last updated: 2024-05-08

Post by mehmetembedded on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
Can you give more details about how i can make it happen please ? Thanks
Last updated: 2024-05-09

Automatic TOOL Length Measurement like Typical CNC Machine. ^{CODESYS Forge talk (Thread)}
Automatic TOOL Length Measurement like Typical CNC Machine.
Last updated: 2024-05-09

Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Thread)}
Linux ARM64 SL, GPIO Access
Last updated: 2024-05-09

Post by yannickasselin on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
A bit of work but maybe possible to make your own driver using "CODESYS Control SL Extension Package". Look at the "ExternalIoDrv" example. It is installed in "C:\Program Files\CODESYS 3.5.20.0\CODESYS\CODESYS Control SL Extension Package" when you install the "CODESYS Control for Linux SL".
Last updated: 2024-05-08

Post by k2saki on Automatic TOOL Length Measurement like Typical CNC Machine. ^{CODESYS Forge talk (Post)}
I'd like to measure tool length using SW. How do I set variable from the accurate drive position when switch turn ON/OFF? Hopefully, I'd like to measure Z-Pos with M-Function in G-Code automatically, And I'd like to set it to G43 as tool length correction.
Last updated: 2024-05-09

Post by timvh on Change the Opening Position of the Dialog using VU.FbOpenDialog ^{CODESYS Forge talk (Post)}
Probably best to call the FB continuously. So something like this could solve it: IF xOpenLatchSettingDialog THEN xOpenLatchSettingDialog := FALSE; fbOpenLatchSettingsDialog.xExecute := TRUE; END_IF IF fbOpenLatchSettingsDialog.xDone OR fbOpenLatchSettingsDialog.xError THEN fbOpenLatchSettingsDialog.xExecute := FALSE; END_IF TopLeftDialog.iX := 100; TopLeftDialog.iY := 23; fbOpenLatchSettingsDialog( itfClientFilter:= VU.Globals.OnlyTargetVisu, sDialogName:= 'visu_AlarmLatchSettings', xModal:= TRUE, pTopLeftPosition:= ADR(TopLeftDialog) );
Last updated: 2024-05-09

Reading Named Pipes in Linux Is there a better way? ^{CODESYS Forge talk (Thread)}
Reading Named Pipes in Linux Is there a better way?
Last updated: 2024-05-09

Change the Opening Position of the Dialog using VU.FbOpenDialog ^{CODESYS Forge talk (Thread)}
Change the Opening Position of the Dialog using VU.FbOpenDialog
Last updated: 2024-05-09

Post by rabaggett on Reading Named Pipes in Linux Is there a better way? ^{CODESYS Forge talk (Post)}
I have a Python program that will handle things in my application such as VISA over IP and Telnet control of instruments. I want the main control and HMI in Codesys. My problem is communication between the two. I have looked at several ways to accomplish this, and settled on having the Python program create two named pipes, one to send information to Codesys, and one for Codesys to send information to Python. The information would be packetized with \n for end of packet.. Seems simple. I think the named pipes method should work, but file reading in Codesys using the CAA file library starts to get difficult when the file is never ending, as in this case. Before I spend too much time making something that may be fundamentally flawed I want to ask. Is there a better way? Is there a way to read the file 'one line at a time' which might solve my never ending file problem? Thanks!
Last updated: 2024-05-09

Post by pasillalej on No gateway with the given settings could be found ^{CODESYS Forge talk (Post)}
Go to Online>Communication Parameters...>Gateway>TCP/IP> Click on "New..." and reestablish your connections with whatever IP address and set up information you have. Bypass whatever is necessary as you may have to redownload to the PLC.
Last updated: 2024-05-09

Post by jonasz on Discontinuity of A/B/C axis movement. ^{CODESYS Forge talk (Post)}
PrtScr
Last updated: 2024-05-09

Discontinuity of A/B/C axis movement. ^{CODESYS Forge talk (Thread)}
Discontinuity of A/B/C axis movement.
Last updated: 2024-05-09

Post by jonasz on Discontinuity of A/B/C axis movement. ^{CODESYS Forge talk (Post)}
Hi, My problem was related to the behavior of the modulo axis, but maybe you will find something useful from what I write. The solution lies in path processing. Codesys offers a G-code analysis tool. Insert a CNC object into the project. The CNC settings object will be added automatically. By inserting appropriate processing modules into the CNC settings object and parameterizing them, you can test the behavior of the axis. When the effect is satisfactory, remember to add the module from CNC settings in the correct order in the processing path. Each CNC machine case is different. You need to spend some time to get your design tailored like an Armani suit. Good luck.
Last updated: 2024-05-09

Post by stiller on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
Thank you for your answer! I'm not sure, but it seems this is not what I am looking for. I attached three pictures. The first one is from the Codesys IDE. I use an Information Model to generate an OPC-UA server. I connected via UA-Expert, and there I see the URIs I would like to change.
Last updated: 2024-05-10

OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Thread)}
OPC-UA ApplicationUri / ProductUri
Last updated: 2024-05-10

Post by stiller on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
Hello! Is there a way to change ApplicationUri and ProductUri of the OPC_UA server? I can not find any information about it. Does someone have a clue? Thank you in advance!
Last updated: 2024-05-10

Post by timvh on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
Do you mean this: https://content.helpme-codesys.com/en/CODESYS%20Communication/_comm_use_dynamic_opc_ua_server_comm_settings.html
Last updated: 2024-05-10

Post by ioannis-a on How to Use Personal Access Tokens from GitHub with Codesys Git ^{CODESYS Forge talk (Post)}
I have the same issue. Is there any solution?
Last updated: 2024-05-12

CODESYS Control Standard S and Beaglebone ^{CODESYS Forge talk (Thread)}
CODESYS Control Standard S and Beaglebone
Last updated: 2024-05-11

How to Use Personal Access Tokens from GitHub with Codesys Git ^{CODESYS Forge talk (Thread)}
How to Use Personal Access Tokens from GitHub with Codesys Git
Last updated: 2024-05-12

JSON Utilities and SetArray ^{CODESYS Forge talk (Thread)}
JSON Utilities and SetArray
Last updated: 2024-05-11

Post by corriibme on JSON Utilities and SetArray ^{CODESYS Forge talk (Post)}
Hello @florian, Could you please help with how to set an array value? I've been trying to use the with the setKeyWithArray method which creates the key with an empty array value. But I have been unable to set items in this array? objindex:= fb_JBuilder.SetKeyWithArray("Key6", diParentIndex := diRootIndex); objindex2:= fb_JBuilder.SetValue(value:= iValue2, diParentIndex:= objindexx); //iValue: array[0..n] of int; Best regards
Last updated: 2024-05-11

Sort by relevance or date