Post by tariq on Using Hilscher CIFX Cards as EtherCAT Masters in CODESYS ^{CODESYS Forge talk (Post)}
Dear Codesys Support Team, I hope this message finds you well. I am currently working on a project that involves using a Hilscher CIFX card to act as an EtherCAT master within the CODESYS environment. Despite following the available documentation and setup guides, I have encountered some challenges and require assistance to ensure proper configuration and operation. Questions: 1- Could you please confirm if the Hilscher CIFX card is supported as an EtherCAT master in CODESYS? If so, are there specific drivers or configuration files that need to be installed? 2- Are there detailed setup guides or example projects available that demonstrate the integration of Hilscher CIFX cards with CODESYS for EtherCAT communication? 3- Is there any additional software or plugins required for ensuring seamless communication between the CIFX card and the EtherCAT slaves within CODESYS? Your support and guidance on these matters would be greatly appreciated, as it is crucial for the success of our project. Thank you for your time and assistance. I look forward to your prompt response. Best regards, TB
Last updated: 2024-07-02

Post by trusty-squire on CNC - How to manipulate SMC_GeoInfo objects ^{CODESYS Forge talk (Post)}
I have an application using CNC GCode interpolation, but I need to modify the GCode provided to the PLC based on certain parameters. I am currently attempting to modify the SMC_GeoInfo objects in the SMC_OutQueue using the code below. Note that all the other code is pretty standard and works fine, but when I add the below it errors. PROGRAM TEST VAR fbReadCncFile : SMC_ReadNCFile2; fbCncInterpreter : SMC_NCInterpreter; arrCncInterpreter : ARRAY[1..99] OF SMC_GeoInfo; pGeoInfo: POINTER TO SMC_GeoInfo; giGeoInfo: SMC_GeoInfo; // ... END_VAR // ... Some code here in order to read CNC file using SMC_ReadNCFile2 and provide to SMC_NCInterpreter pGeoInfo := SMC_GetObj(poq:=ADR(fbCncInterpreter.poqDataOut), n:=1); IF pGeoInfo <> 0 THEN giGeoInfo := pGeoInfo^; // Do some manipulation here, then update the queue at the same position MC_SetObj(poq:=ADR(fbCncInterpreter.poqDataOut) , n:=0 , pgi:=ADR(giGeoInfo) ); END_IF It throws an error when I get to the line giGeoInfo := pGeoInfo^; Error: EXCEPTION [AccessViolation] occured: App=[Sim.Device.Application], Task=[PathTask] How do I use SMC_GetObj and access the data? It creates a pointer with the value as shown in the photo, but all the dereferenced values say dereference of invalid pointer.
Last updated: 2024-07-26

Post by programmierer on Implementing UDP Communication ^{CODESYS Forge talk (Post)}
Hello everyone, I hope you can help me with my problem. I am new to programming and am currently working with a WAGO controller in our lab, which controls a heat pump. My goal is to send the electrical power of the heat pump (Pel_WP) via a UDP connection to a specific IP address. I am using Codesys version 2.3 and following the guide I found here: https://forge.codesys.com/forum/de/396/genmed-Konfiguration%20der%20UDP%20Kommunikation%20Cosesys%20S7.pdf. I have adapted the guide to suit my needs. The data sending works since I can force the reception value Pel_WP and the data is sent accordingly. However, I am having trouble with the receiving part. The reception value is not being correctly received, and the diSocket variable shows -1. The connection between the heat pump and the WAGO controller seems to be set up correctly, as the heat pump is listed under the communication parameters with the correct IP address. I have also attached images to provide a better view of the setup. I would greatly appreciate any support or suggestions for a solution. Thank you in advance!
Last updated: 2024-08-02

Post by sturmghost on Mimic behavior of the visualization button element with a custom button ^{CODESYS Forge talk (Post)}
Im wondering how Codesys is doing the mouse event capturing with their visualization button element? If you add such a button without configuring any input configuration event (like OnMouseDown) or button state variable and then click on the button, the button changes to the visual pressed state and back if you release the button (so they must react to an OnMouseDown event). But how? If I try to mimic this behavior with my custom button visualization element (like a basic rectangle) I need to use an input configuration event to change the color of the button (to make it look like the button was pressed on OnMouseDown event). When I try to add this button via a Frame-Element to my main visualization page I'm unable to use an input configuration event on the Frame-Element because the input configuration event on the button element won't be evaluated anymore (it seems like you can't stack input fields, e.g. invisible input elements, onto each other). Hence the button is not shown pressed anymore. How they do it?
Last updated: 2024-08-04

Post by karel-bas on Loosing connection to emulation running on Linux ^{CODESYS Forge talk (Post)}
Hello, I am trying to emulate my code but for some reason my Codesys IDE keeps loosing connection to the emulator. I am constantly pinging virtual machine on which its running and its running fine, but codesys refuses to reconect to it, and is not able to rediscover it. Codesys 3.5 SP20 Patch 1 I have linux installed like image in attachment.(using version 4.12) Linux VM is set up to use up to 4 cores and 8gb of ram, with nothing else runing on it. I dont have a license so I am aware that the emulation shouldnt run for more then 120 minutes I am able to, login, get sysinfo, reboot etc from codesys IDE for certain period of time (5minutes) then my connection gets lost, sometimes I can login again, but sometimes i have to reboot the VM. Any suggestions what might be the issue ?
Last updated: 2024-09-19

Post by rossanoparis on Clarifications regarding the appropriate runtime system to use ^{CODESYS Forge talk (Post)}
Thank you @TimvH It is clear that licences are application based and now thanks to your reply I could understand the meaning of RT systems. The RT called "CODESYS Control for Linux ARM SL" can be deployed on a generic debian based ARM system. The RT called "CODESYS Control for Raspberry Pi MC SL" is more specific for Rasberry HW. Did I understand correctly? Regarding the RT called "CODESYS Virtual Control SL" despite its description it is not clear to me when to use it. It seems that a project created using such RT system can be deployed on any HW. It sound good obviously, as it means that it is possible to realize a completely abstract project from its hardware. The only limit could be represented by the need of using a specific HW or OS feature, in that case a more specific RT system should be chosen. Is my last consideration correct? Regards Rossano
Last updated: 2024-09-26

Post by bjarne-pagaard on Communication between applications on same device/controller/runtime (Win RTE 3.5.20.20) ^{CODESYS Forge talk (Post)}
Hi, I would like to divide a project into multiple applications - as a minimum: one handling visualization and Alarm Manager, one handling I/O and plant control logic. But how to exchange variables between the applications? What have you done to get such a solution? In versions 3.5.19 and earlier, you can have Child applications, where the children can access a GVL in the Parent application. Children apps is no longer possible in 3.5.20 - but you can have 'sibling' apps - Several apps directly under PLC Logic, that is. But how do they best communicate? The Communication Manager / Data Sources Manager is sort of possible via OPC UA, but it seems like overkill and with some limitations - for example no ARRAY OF STRUCT possible this way. If you have separate devices in your project, you can exchange data via 'CODESYS ApplicationV3', but not other applications in the same device (see attachment Datasources.png). You can do it via 'Select the project type'->'Other Project' and select the same project file, but this leads to crashing the Development system when working with the variables afterwards. It would be great to hear your thoughts / experiences on this topic - Bjarne
Last updated: 2024-09-27

Post by egau on Hard shutdown: no code on device after power on ^{CODESYS Forge talk (Post)}
This explanation aligns with the issues we’re experiencing with our machines. The scenario I described is happening with one of them (let’s call it Machine A). This machine is identical to another one (Machine B), except for some custom code that facilitates communication with an external Beckhoff PLC for MES integration in the production line. Machine B has been powered on and off daily for at least three months and has never had this problem. Given that, I highly doubt the MES custom code is the cause of the code corruption. This being said, your explanation does seem plausible. However, if faulty EtherCAT cables were the issue, why wouldn't the error occur during normal operation? Why would bad cables only cause problems during a hard shutdown? One last question: When you encountered this behavior, did you see a similar error in your logs? i.e, an "AccessViolation" exception in the EtherCAT Task?
Last updated: 2024-10-03

Post by mainak on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Hello all, I am using the OPC UA server with my custom information model. I have used the communication manager to add my information model under my application and created instances from OPC UA types. I see that the created instances in the OPC UA server has some opaque nodeid (attached screenshot) and I want to change that. Therefore I have the following questions: 1. Is there a way to configure the NodeIds of instances in the OPC UA server? I tried to edit it using the UaExpert client but got error "BadNotWriteable". is it possible to configure it somewhere so that the nodeids can be changed using an external client? 2. Is there a way to define the rule for creating instance nodeids within the codesys IDE? 3. Is it possible to create the instances before e.g. using a modelling tool like UaModeler and import them as part of the information model and use them later? Using the communication manager, I can only create instances from types. I couldn't find a way to map my existing instances to plc tags from my application. It would be nice if someone could help me with these issues. Thanks in advance. :)
Last updated: 2024-10-19

Post by dogulas on OPC UA C# client connecting to OPC UA CODESYS server ^{CODESYS Forge talk (Post)}
Ok, I have a simple test environment. From C#, using OPC UA, I can read DINTs, write DINTs, read Structs, but when I try to write a struct I get BadNotWritable. I am using Communication Manager, OPC UA Server, and IEC Symbol Publishing. I have a struct defined with one single DINT in it. The instance of the struct is in GVL. The struct is marked read/write in IEC Symbol Publishing. Any ideas? Pointers are welcome. public static async Task WriteStructA(byte[] structAData) { if (_session == null) throw new Exception("session is null"); // create a RequestHeader RequestHeader requestHeader = new RequestHeader { Timestamp = DateTime.UtcNow, TimeoutHint = 30000 // timeout in milliseconds }; // create an ExtensionObject to wrap the value to be written ExtensionObject extensionObject = new ExtensionObject( new ExpandedNodeId("GVL_StructA", 5), structAData ); // create a WriteValue object to hold the value to be written WriteValue writeValue = new WriteValue { NodeId = _structANodeId, AttributeId = Attributes.Value, Value = new DataValue(extensionObject) }; // put the WriteValue object into a WriteValueCollection object WriteValueCollection writeValueCollection = new WriteValueCollection() { writeValue }; // perform the write operation asynchronously WriteResponse writeResponse = await _session.WriteAsync( requestHeader, writeValueCollection, CancellationToken.None ); // check the result of the write operation if (writeResponse.Results[0] != StatusCodes.Good) throw new Exception("Write failed: " + writeResponse.Results[0]); }
Last updated: 2024-12-17

Post by scoob on ModbusFB - Slow Response Time ^{CODESYS Forge talk (Post)}
Hello, I have been trying to use the ModbusFB functions so I can put some code into libraries, but it seems to be very slow for me. I have a Modbus device with 100ms registers. I previously setup 10 channels in the 'traditional' Modbus Slave with channels and mappings - and set a cyclic trigger at 100ms - this worked fine. I then tried the ModbusFB example, and setup reading the same 10 blocks of modbus addresses, copying the example and putting all of the requests into an array and triggering the requests sequentially. I timed how long the requests are taking to get round to each one, and it is around 1s 450ms. How do I speed this up to match the cyclic time? IF NOT(init) THEN init := TRUE; // Set the required IP address: ipAddress[0] := 192; ipAddress[1] := 168; ipAddress[2] := 1; ipAddress[3] := 10; // Pass the required IP address to the clinet FB: client_NetworkSwitch.aIPaddr := ipAddress; client_NetworkSwitch.udiLogOptions := (ModbusFB.LoggingOptions.ClientConnectDisconnect OR ModbusFB.LoggingOptions.ClientReceivedValidReplies); // Try to connect the client client_NetworkSwitch(xConnect:=TRUE); // Configure all the channels to read connecting them to the client: portStatus_Request(rClient := client_NetworkSwitch, uiStartItem := 4096, uiQuantity := 32, pData := ADR(portStatus), udiReplyTimeout := udiReplyTimeout); portSpeed_Request(rClient := client_NetworkSwitch, uiStartItem := 4352, uiQuantity := 32, pData := ADR(portSpeed)); flowControl_Request(rClient := client_NetworkSwitch, uiStartItem := 4608, uiQuantity := 32, pData := ADR(flowControl)); linkUpCounter_Request(rClient := client_NetworkSwitch, uiStartItem := 5888, uiQuantity := 32, pData := ADR(linkUpCounter)); txPacketCounter1_Request(rClient := client_NetworkSwitch, uiStartItem := 8192, uiQuantity := 100, pData := ADR(txPacketCounter1)); txPacketCounter2_Request(rClient := client_NetworkSwitch, uiStartItem := 8292, uiQuantity := 28, pData := ADR(txPacketCounter2)); rxPacketCounter1_Request(rClient := client_NetworkSwitch, uiStartItem := 8448, uiQuantity := 100, pData := ADR(rxPacketCounter1)); rxPacketCounter2_Request(rClient := client_NetworkSwitch, uiStartItem := 8548, uiQuantity := 28, pData := ADR(rxPacketCounter2)); txErrors_Request(rClient := client_NetworkSwitch, uiStartItem := 8704, uiQuantity := 64, pData := ADR(txErrors)); rxErrors_Request(rClient := client_NetworkSwitch, uiStartItem := 8960, uiQuantity := 64, pData := ADR(rxErrors)); // Trigger all client requests initially FOR clientRequestsCnt := 0 TO (SIZEOF(clientRequests)/SIZEOF(clientRequests[0]))-1 DO pClientRequest := clientRequests[clientRequestsCnt]; pClientRequest^.xExecute := TRUE; END_FOR // Prepare sequential trigger / control of client requests. clientRequestsCnt := 0; pClientRequest := clientRequests[clientRequestsCnt]; END_IF // Call the client to do request processing: client_NetworkSwitch(); // Now we trigger client request sequentially ... IF NOT pClientRequest^.xExecute AND NOT pClientRequest^.xDone AND run AND client_NetworkSwitch.xConnected THEN pClientRequest^.xExecute := TRUE; END_IF // .. and check result/error IF pClientRequest^.xExecute AND run AND client_NetworkSwitch.xConnected THEN IF pClientRequest^.xDone THEN // Prepare next trigger of client request (a rising edge of xExecute) pClientRequest^.xExecute := FALSE; IF clientRequestsCnt < SIZEOF(clientRequests)/SIZEOF(clientRequests[0])-1 THEN // next client request clientRequestsCnt := clientRequestsCnt + 1; ELSE clientRequestsIterationCounter := clientRequestsIterationCounter + 1; clientRequestsCnt := 0; END_IF pClientRequest := clientRequests[clientRequestsCnt]; END_IF END_IF I did try a semi-coded way using the IoDrvModbusTCP library, and setting the slave com settings, then 10 commands and 10 requests, then using a TP on xDone as a pause, before triggering another request - this is time the delay is around 120ms - so the device is fine with the speed, just something I am doing wrong in the ModbusFB method I am sure.
Last updated: 2024-04-26

Post by raghusingh77 on TEMU COUPON CODE ACU934948 GET $100 OFF FOR NEW AND EXISTING CUSTOMERS ^{CODESYS Forge talk (Post)}
You can take advantage of the exclusive Temu discount codes "ACU934948" to receive a $100 discount on your purchases, along with the chance to get free items. This offer is available for new customers in Canada, making it a great opportunity to shop on Temu. Get $100 Off with Temu Coupon Code [ACU934948] The highlight of shopping at Temu right now is the $100 off coupon code [ACU934948]. This code provides a flat discount on your order value, making it easier than ever to save money while shopping for your favorite items. Whether you’re interested in fashion, electronics, or home goods, this coupon is a fantastic way to maximize your savings. Exclusive Discounts for First-Time Users New to Temu? You’re in luck! By redeeming the free Temu coupon code [ACU934948], first-time users can enjoy an additional 30% discount on their first order. This is a perfect opportunity to explore Temu’s extensive catalog while enjoying significant savings. Additionally, the Temu new user coupon [ACU934948] offers up to 75% off your first purchase, ensuring that you get the best possible deal as you start your shopping journey. Massive October Promotions: Up to 90% Off October 2024 is an exciting month for shoppers at Temu. With the Temu coupon code [ACU934948], customers can access discounts of up to 90% off select items during this promotional period. From seasonal items to everyday essentials, there’s something for everyone at unbeatable prices. 30% Off Temu Coupons, Promo Codes + 25% Cash Back [ACU934948] Redeem Temu Coupon Code [ACU934948]. TEMU COUPON $100 OFF [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS [ACU934948] TEMU COUPON $100 OFF FIRST ORDER [ACU934948] TEMU COUPON $100 OFF REDDIT [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS REDDIT [ACU934948] TEMU COUPON $100 OFF NEW USER [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 [ACU934948] TEMU COUPON $100 OFF CODE [ACU934948] TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA [ACU934948] TEMU COUPON $100 OFF HOW DOES IT WORK [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA [ACU934948] TEMU COUPON $100 OFF 2024 [ACU934948] TEMU COUPON $100 OFF FOR NEW CUSTOMERS [ACU934948] TEMU COUPON $100 OFF CANADA [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER [ACU934948] TEMU 100 OFF COUPON BUNDLE [ACU934948] 100 COUPON CODES [ACU934948] 1 BUCKS TO PHP [ACU934948] IS THERE A COUPON IN THE PHILIPPINES [ACU934948] 100 BUCKS TO PHP [ACU934948] TEMU $100 OFF COUPON [ACU934948] TEMU $100 OFF CODE [ACU934948] TEMU 100 VALUE COUPON BUNDLE [ACU934948] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING [ACU934948] TEMU 100 OFF COUPON CODE LEGIT [ACU934948] TEMU 100 OFF COUPON CODE REDDIT [ACU934948] TEMU 100 OFF COUPON CODE FOR EXISTING USERS [ACU934948] TEMU 100 OFF COUPON CODE UK [ACU934948] TEMU COUPON CODE $100 OFF FREE SHIPPING [ACU934948] TEMU COUPON CODES 100 PERCENT OFF [ACU934948] WHAT IS A HIGH COUPON RATE [ACU934948] HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT [ACU934948] WHAT IS THE COUPON RATE [ACU934948] HOW TO CALCULATE COUPON VALUE [ACU934948] USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF [ACU934948] TEMU 100 DOLLAR OFF COUPON [ACU934948] DOMINOS COUPON CODE 100 OFF [ACU934948] DOMINO'S 100 RS OFF COUPON CODE [ACU934948] TEMU COUPON $100 OFF EXISTING CUSTOMERS [ACU934948] WHAT IS 10 OFF 100 DOLLARS [ACU934948] 100 OFF PROMO CODE [ACU934948] 1 CASHBACK ON 100 DOLLARS [ACU934948] IS TEMU 100 OFF COUPON LEGIT [ACU934948] TEMU COUPON $100 OFF [ACU934948] TEMU COUPON $100 OFF LEGIT [ACU934948] Temu Coupon Code $100 OFF [ACU934948]
Last updated: 2024-10-26

Post by dwpessoa on CNC Jumps G20 - SMC_NCInterpreter and long time to process ^{CODESYS Forge talk (Post)}
I am studying and developing a Softmotion+CNC system for a machine that executes multiple pieces. The G code program is written by the machine operator and each cycle execute 1 piece. The programs are large, exceeding 1000 lines and using up to 8 axes (X, Y, Z, A, B, C, P and Q). The machine needs to run cyclically, executing N pieces (selected by the Operator)... so I tested it using Looping and counters (G36 G37 and G20) and it worked, but it takes a long time to process, and the more pieces I need, the longer the processing time and this is totally impracticable. I found this solution which was very good, and for a few cycles it works well, but for 99999 pieces of a program with 1000 lines, it doesn't work very well... Another solution I tested is to maintain the interpolator with an automatic restart, that is, I load the program without looping (without G20) and give it another start as soon as it finishes. This partially resolved it, but there is still a delay in processing SMC_NCInterpreter in each restart :(. Another solution I thought of is to manually create the SMC_GEOINFO structure and then reuse it, avoinding the Interpreter, but reading the documentation and checking the structure filled by standard blocks, I noticed that there doesn't seem to be a "JUMP" function in the structure! In other words, the SMC_NCInterpreter actually keeps copying and copying the program section for each jump (G20)... If I repeat a 10-line program 1000 times, I will have a structure with more than 10000 lines... possibly this is the cause of take so long to process. Has anyone ever had a problem like this? I believe the same thing happens with typical applications with manipulator robots using Codesys in continuous cycles, and I would like to know if there is any solution, or even if I am misinterpreting the G20 question in SMC_GEOINFO. Thanks!
Last updated: 2023-09-20

Post by bbm1995 on Camera RTSP Feed ^{CODESYS Forge talk (Post)}
Hi dgrard, I had the same issue for a long time, but on a WAGO webvisu. Now I'm glad that I can share my solution. I don't know if you are trying to use the webvisu or the target visu, but this works on webvisu: Get "go2rtc" and set it up according to the documentation. I'm running the Windows binary. Here's my example of the go2rtc.yaml config file (contains working example streams): api: listen: ":1984" # default ":1984", HTTP API port ("" - disabled) origin: "*" # default "", allow CORS requests (only * supported) static_dir: "www" # default "", folder for static files (custom web interface) tls_listen: ":443" # default "", enable HTTPS server tls_cert: "./SSL/fullchain.pem" tls_key: "./SSL/privatekey.pem" streams: # Streams with multiple links will fall back on the next link. ABUS TVIP48511: - rtsp://<username>:<password>@<hostname>:<port>/ch1/main - rtsp://<username>:<password>@<hostname>:<port>/ch1/sub # Diagnostic connections Kirchhoff Institute for Physics - Germany: http://pendelcam.kip.uni-heidelberg.de/mjpg/video.mjpg Blanton Bottling, Kentucky - USA: http://camera.buffalotrace.com/mjpg/video.mjpg Tokyo - Japan: http://61.211.241.239/nphMotionJpeg?Resolution=320x240&Quality=Standard Tampere Hacklab - Finland: http://tamperehacklab.tunk.org:38001/nphMotionJpeg?Resolution=640x480&Quality=Clarity Soltorget Pajala - Sweden: http://195.196.36.242/mjpg/video.mjpg Kaiskuru Skistadion - Norway: http://77.222.181.11:8080/mjpg/video.mjpg webrtc: listen: ":8555" #ice_servers: # - urls: [ "stun:localhost:3478" ] # username: "" # credential: "" Access the webinterface of go2rtc and get the link of your stream. Use the link as for your browser frame in the visualization. Depending on your device, you need to be able to access the file /etc/lighttpd/lighttpd.conf or /etc/lighttpd/webvisu.conf and change the contents similar to this one, otherwise you'll get CORS and CSP errors in the browser and you won't be able to view the stream on the webvisu: # Webvisu specific settings $SERVER["socket"] =~ port_webvisu_used_any { url.redirect += ( "^/webvisu/?$" => "/webvisu/webvisu.htm" ) $HTTP["url"] =~ "^/webvisu/?" { var.response_header_policy_webvisu = ( # CSP for WebVisu, allowing inline sources. "Content-Security-Policy" => "default-src 'self' 'unsafe-inline'; media-src *; frame-src *", # CORS for WebVisu, allowing any origin to access. "Access-Control-Allow-Origin" => "*", # Tell older browsers that this page can only be displayed if all ancestor # frames are same origin to the page itself. "X-Frame-Options" => "SAMEORIGIN" ) # Response header policy for WebVisu setenv.set-response-header = var.response_header_policy_webvisu setenv.set-response-header += var.response_header_policy_common }
Last updated: 2023-11-14

Post by solidlogicguy on Little endian to Float from Modbus RTU ^{CODESYS Forge talk (Post)}
Hello, I got a device from which I require to read values from I am using a WAGO PLC 750-8212 and I am communicating through Modbus Master FUNCTION BLOCK from library WagoAppPLCModbus in Codesys 3.5 to this device. I already receive data from the device that is a CVM to monitor voltage from a fuel cell. The technical support of the company that makes these devices says that the data is sent in little endian form. And I want to convert it to a float value. The tech support sent me the next instructions of how to do it but I am new using codesys, so any advice or help I will really appreciate so much. Message from tech support: The process is complicated, better to do it with already implemented library in the language/program you use. Basically the process should be next: To convert the two Modbus registers containing parts of a 32-bit float in little-endian byte order to a floating-point number using mathematical operations, you first need to combine the two 16-bit integers (assuming reg1 is the lower word and reg2 is the higher word) and then interpret the result according to the IEEE 754 standard. Given: - Register 192 (reg1) = 4096 - Register 193 (reg2) = 14884 Step 1: Combine the two registers. Since we are dealing with little-endian byte order, reg2 is the high word, and reg1 is the low word: combined = reg2 * 2^16 + reg1 combined = 14884 * 65536 + 4096 combined = 975175680 + 4096 combined = 975179776 Step 2: Convert the combined value to binary: combined_binary = '1110101101011100000000000000000' Step 3: Split the binary into IEEE 754 components: Sign bit (1 bit): 0 Exponent (8 bits): 11101011 Mantissa (23 bits): 01011100000000000000000 Step 4: Convert the binary exponent to decimal and subtract the bias (127 for 32-bit floats): exponent = int('11101011', 2) - 127 exponent = 235 - 127 exponent = 108 Step 5: Calculate the mantissa as a fraction: The mantissa in IEEE 754 format is the fractional part after the leading 1 (which is implicit). Therefore, we need to convert the binary mantissa to decimal and add the implicit leading 1: mantissa_fractional = 1 + int('01011100000000000000000', 2) / 2^23 mantissa_fractional = 1 + 18688 / 8388608 mantissa_fractional = 1 + 0.002227783203125 mantissa_fractional ≈ 1.002227783203125 Step 6: Combine the sign, exponent, and mantissa to get the float value: float_value = (-1)^0 * mantissa_fractional * 2^exponent float_value = 1 * 1.002227783203125 * 2^108 Because the exponent is quite large, the resulting float value is a very large number.
Last updated: 2023-12-15

Post by jari-koivuluoma on Problem trying Net Base Services 3.5.15.0 TCP connection ^{CODESYS Forge talk (Post)}
I have a need to send messages between 2 PLCs and I cant use network variables (because of size limit) so I tried writing this simple test program. This seems to work fine. I can send messages back and forth when a first "Start server" and then "Connect client". See the attached image. However, if I disconnect the client by setting ClientConnect to false and try to re-connect then the TCP_Client just gives me TIMEOUT error. When I stop and start the server again, then Im able to reconnect. How is this supposed to work? Why reconnecting wont work. There is not other way of disconnecting the client than setting xEnable of the TCP_Client to false. This is just a testing program and I will try it on 2 seperate devices once this works. PROGRAM PLC_PRG VAR CONSTANT mySize : UDINT := 255; END_VAR VAR Server: NBS.TCP_Server; ServerIpStr: STRING := '127.0.0.1'; ServerIP: NBS.IP_ADDR; ServerPort: UINT := 50000; ServerConnection: NBS.TCP_Connection; Client: NBS.TCP_Client; ServerRead: NBS.TCP_Read; ServerWrite: NBS.TCP_Write; ServerSend: STRING(mySize); ServerReceive: STRING(mySize); ServerConnect: BOOL; bServerSend: BOOL; IP: NBS.INADDR; ConnectedClientIP: STRING; ClientPort: UINT := 50000; ClientIpStr: STRING := '192.168.1.49'; ClientIP: NBS.IP_ADDR; ClientRead: NBS.TCP_Read; ClientWrite: NBS.TCP_Write; ClientSend: STRING(mySize); ClientReceive: STRING(mySize); ClientConnect: BOOL; bClientSend: BOOL; Error: BOOL; Message: BOOL; END_VAR // Server ServerIP.sAddr := ServerIpStr; Server( ipAddr := ServerIP, uiPort := ServerPort ); ServerConnection( xEnable := Server.xEnable, hServer := Server.hServer, ); IP := ServerConnection.IPAddress; ConnectedClientIP := F_Concat7( BYTE_TO_STRING(IP.S_un_b.s_b1),'.', BYTE_TO_STRING(IP.S_un_b.s_b2),'.', BYTE_TO_STRING(IP.S_un_b.s_b3),'.', BYTE_TO_STRING(IP.S_un_b.s_b4)); ServerRead( xEnable := ServerConnection.xActive, hConnection := ServerConnection.hConnection, szSize := SIZEOF(ServerReceive), pData := ADR(ServerReceive) ); IF ServerRead.xReady AND ServerRead.szCount > 0 THEN Message := TRUE; END_IF IF ServerRead.eError > 0 THEN Error := TRUE; END_IF ServerWrite( xExecute := ServerConnection.xActive AND bServerSend, hConnection := ServerConnection.hConnection, szSize := LEN(ServerSend)+1, pData := ADR(ServerSend) ); IF ServerWrite.xDone THEN bServerSend := FALSE; END_IF IF ServerWrite.eError > 0 THEN Error := TRUE; END_IF // Client ClientIP.sAddr := ClientIpStr; Client( xEnable := ClientConnect, ipAddr := ClientIP, uiPort := ServerPort, udiTimeOut := 10000000 ); ClientRead( xEnable := Client.xActive, hConnection := Client.hConnection, szSize := SIZEOF(ClientReceive), pData := ADR(ClientReceive) ); IF ClientRead.xReady AND ClientRead.szCount > 0 THEN Message := TRUE; END_IF IF ClientRead.eError > 0 THEN Error := TRUE; END_IF ClientWrite( xExecute := Client.xActive AND bClientSend, hConnection := Client.hConnection, szSize := LEN(ClientSend)+1, pData := ADR(ClientSend) ); IF ClientWrite.xDone THEN bClientSend := FALSE; END_IF IF ClientWrite.eError > 0 THEN Error := TRUE; END_IF
Last updated: 2024-10-03

Post by rita56re on Get $100 Off Temu Coupon Code [act892435] | + 30% Discount ^{CODESYS Forge talk (Post)}
Get $100 Off Temu Coupon Code [act892435] | + 30% Discount Temu has quickly become a popular temu shopping destination in the United States(USA), offering a wide range of products at competitive prices. With its user-friendly interface and extensive inventory, Temu has attracted a growing number of shoppers seeking value. One of the standout features of this platform is the availability of Temu coupon codes, including an enticing Temu coupon code $100 off, temu coupon code (act892435) that is accessible to temu coupon code 2024 for existing customers, Temu coupon code “act892435” $100 off USA. This guide will explore how to effectively use this temu coupon code (act892435), the benefits of temu shopping on Temu, and tips for maximizing your savings. Free Temu codes $100 off — [act892435] Temu coupon $100 off — [act892435] Temu coupon 30% off — [act892435] Temu Memorial Day Sale 75% off — [act892435] Temu coupon code today — [act892435] Temu free gift code — [act892435] (Without inviting friends or family member) Temu coupon code for Canada - 30% Off— [act892435] Temu Coupon code Australia - 30% Off— [act892435] Temu Coupon code New Zealand - 30% Off — [act892435] Temu Coupon code Japan - 30% Off — [act892435] Temu Coupon code Mexico - 30% Off — [act892435] Temu Coupon code Chile - 30% Off — [act892435] Temu Coupon code Peru - 30% Off — [act892435] Temu Coupon code Colombia - 30% Off — [act892435] Temu Coupon code Malaysia - 30% Off — [act892435] Temu Coupon code Philippines - 30% Off — [act892435] Temu Coupon code South Korea - 30% Off — [act892435] Redeem Free Temu Coupon Code [act892435] for first time user Get a $100 discount on your Temu order with the promo code "act892435". You can get a discount by clicking on the item to purchase and entering this Temu coupon code $100 off "[act892435]". Temu Coupon Code [act892435]: Get Up To 90% OFF In June 2024 Are you looking for the best Temu coupon codes to get amazing discounts? Our Temu coupons are perfect for getting those extra savings you crave. We regularly test our coupon codes for Temu to ensure they work flawlessly, giving you a guaranteed discount every time. Temu New User Coupon [act892435]: Up To 75% OFF For First-Time Users Our Temu first-time user coupon codes are designed just for new customers, offering the biggest discounts and the best deals currently available on Temu. To maximize your savings, download the Temu app and apply our Temu new user coupon during checkout. Temu Coupon Codes For Existing Users [act892435]: 40% Price Slash Have you been shopping on Temu for a while? Our Temu coupon for existing customers is here to reward you for your continued support, offering incredible discounts on your favorite products. Temu Rewards Program For Existing Customers [act892435] Temu values its loyal customers and offers an exclusive rewards program to show appreciation. As an existing customer, you can earn points on every purchase, which can be redeemed for discounts on future orders. Temu Coupon For $100 Off [act892435]: Get A Flat $100 Discount On Order Value Get ready to save big with our incredible Temu coupon for $100 off! Our amazing Temu $100 off coupon code will give you a flat $100 discount on your order value, making your shopping experience even more rewarding. Temu Coupon Code For 40% Off [act892435]: For Both New And Existing Customers Our incredible Temu coupon code for 40% off is here to help you save big on your purchases. Whether you’re a new user or an existing customer, our 40% off code for Temu will give you an additional discount! Temu Coupon Bundle [act892435]: Flat $100 Off + Up To 70% Discount Get ready for an unbelievable deal with our Temu coupon bundle for 2024! Our Temu coupon bundles will give you a flat $100 discount and an additional 40% off on top of it. Free Temu Coupons [act892435]: Unlock Unlimited Savings! Get ready to unlock a world of savings with our free Temu coupons! We’ve got you covered with a wide range of Temu coupon code options that will help you maximize your shopping experience. 30% Off Temu Coupons, Promo Codes + 25% Cash Back [act892435] Redeem Temu Coupon Code [act892435]. TEMU COUPON $100 OFF [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS [act892435] TEMU COUPON $100 OFF FIRST ORDER [act892435] TEMU COUPON $100 OFF REDDIT [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS REDDIT [act892435] TEMU COUPON $100 OFF NEW USER [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 [act892435] TEMU COUPON $100 OFF CODE [act892435] TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA [act892435] TEMU COUPON $100 OFF HOW DOES IT WORK [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA [act892435] TEMU COUPON $100 OFF 2024 [act892435] TEMU COUPON $100 OFF FOR NEW CUSTOMERS [act892435] TEMU COUPON $100 OFF CANADA [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER [act892435] TEMU 100 OFF COUPON BUNDLE [act892435] 100 COUPON CODES [act892435] 1 BUCKS TO PHP [act892435] IS THERE A COUPON IN THE PHILIPPINES [act892435] 100 BUCKS TO PHP [act892435] TEMU $100 OFF COUPON [act892435] TEMU $100 OFF CODE [act892435] TEMU 100 VALUE COUPON BUNDLE [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING [act892435] TEMU 100 OFF COUPON CODE LEGIT [act892435] TEMU 100 OFF COUPON CODE REDDIT [act892435] TEMU 100 OFF COUPON CODE FOR EXISTING USERS [act892435] TEMU 100 OFF COUPON CODE UK [act892435] TEMU COUPON CODE $100 OFF FREE SHIPPING [act892435] TEMU COUPON CODES 100 PERCENT OFF [act892435] WHAT IS A HIGH COUPON RATE [act892435] HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT [act892435] WHAT IS THE COUPON RATE [act892435] HOW TO CALCULATE COUPON VALUE [act892435] USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF [act892435] TEMU 100 DOLLAR OFF COUPON [act892435] DOMINOS COUPON CODE 100 OFF [act892435] DOMINO'S 100 RS OFF COUPON CODE [act892435] TEMU COUPON $100 OFF EXISTING CUSTOMERS [act892435] WHAT IS 10 OFF 100 DOLLARS [act892435] 100 OFF PROMO CODE [act892435] 1 CASHBACK ON 100 DOLLARS [act892435] IS TEMU 100 OFF COUPON LEGIT [act892435] TEMU COUPON $100 OFF [act892435] TEMU COUPON $100 OFF LEGIT [act892435] Temu Coupon Code $100 OFF [act892435] Our exclusive Temu coupon code offers a flat $100 off your purchase, plus an additional 30% discount on top of that. You can slash prices by up to 70% as a new Temu customer using code [act892435]. Existing users can enjoy 40% off their next haul with the same code. But that’s not all! With our Temu coupon codes for 2024, you can get up to 90% discount on select items and clearance sales. Whether you’re a new customer or an existing shopper, our Temu codes provide extra discounts tailored just for you. Save up to 30% with these current Temu coupons [act892435] Free Temu Codes $100 Off — [act892435] Temu Coupon $100 Off — [act892435] Temu Coupon 30% Off — [act892435] Temu Memorial Day Sale 75% Off — [act892435] Temu Coupon Code Today — [act892435] Temu Free Gift Code — [act892435] (Without inviting friends or family member) Temu Coupon Code for Canada - 30% Off— [act892435] Temu Coupon Code Australia - 30% Off— [act892435] Temu Coupon Code New Zealand - 30% Off — [act892435] Temu Coupon Code Japan - 30% Off — [act892435] Temu Coupon Code Mexico - 30% Off — [act892435] Temu Coupon Code Chile - 30% Off — [act892435] Temu Coupon Code Peru - 30% Off — [act892435] Temu Coupon Code Colombia - 30% Off — [act892435] Temu Coupon Code Malaysia - 30% Off — [act892435] Temu Coupon Code Philippines - 30% Off — [act892435] Temu Coupon Code South Korea - 30% Off — [act892435] Redeem Free Temu Coupon Code [act892435] for First-Time Users Get a $100 discount on your Temu order with the promo code "act892435". You can get a discount by clicking on the item to purchase and entering this Temu coupon code $100 off "[act892435]". Temu Coupon Code [act892435]: Get Up To 90% OFF In June 2024 Are you looking for the best Temu coupon codes to get amazing discounts? Our Temu coupons are perfect for getting those extra savings you crave. We regularly test our coupon codes for Temu to ensure they work flawlessly, giving you a guaranteed discount every time. Temu New User Coupon [act892435]: Up To 75% OFF For First-Time Users Our Temu first-time user coupon codes are designed just for new customers, offering the biggest discounts and the best deals currently available on Temu. To maximize your savings, download the Temu app and apply our Temu new user coupon during checkout. Temu Coupon Codes For Existing Users [act892435]: 40% Price Slash Have you been shopping on Temu for a while? Our Temu coupon for existing customers is here to reward you for your continued support, offering incredible discounts on your favorite products. Temu Rewards Program For Existing Customers [act892435] Temu values its loyal customers and offers an exclusive rewards program to show appreciation. As an existing customer, you can earn points on every purchase, which can be redeemed for discounts on future orders. Temu Coupon For $100 Off [act892435]: Get A Flat $100 Discount On Order Value Get ready to save big with our incredible Temu coupon for $100 off! Our amazing Temu $100 off coupon code will give you a flat $100 discount on your order value, making your shopping experience even more rewarding. Temu Coupon Code For 40% Off [act892435]: For Both New And Existing Customers Our incredible Temu coupon code for 40% off is here to help you save big on your purchases. Whether you’re a new user or an existing customer, our 40% off code for Temu will give you an additional discount! Temu Coupon Bundle [act892435]: Flat $100 Off + Up To 70% Discount Get ready for an unbelievable deal with our Temu coupon bundle for 2024! Our Temu coupon bundles will give you a flat $100 discount and an additional 40% off on top of it. Free Temu Coupons [act892435]: Unlock Unlimited Savings! Get ready to unlock a world of savings with our free Temu coupons! We’ve got you covered with a wide range of Temu coupon code options that will help you maximize your shopping experience. 30% Off Temu Coupons, Promo Codes + 25% Cash Back [act892435] Redeem Temu Coupon Code [act892435] TEMU COUPON $100 OFF [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS [act892435] TEMU COUPON $100 OFF FIRST ORDER [act892435] TEMU COUPON $100 OFF REDDIT [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS REDDIT [act892435] TEMU COUPON $100 OFF NEW USER [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS 2024 [act892435] TEMU COUPON $100 OFF CODE [act892435] TEMU COUPON $100 OFF FIRST ORDER FREE SHIPPING [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING USA [act892435] TEMU COUPON $100 OFF HOW DOES IT WORK [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS CANADA [act892435] TEMU COUPON $100 OFF 2024 [act892435] TEMU COUPON $100 OFF FOR NEW CUSTOMERS [act892435] TEMU COUPON $100 OFF CANADA [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FIRST ORDER [act892435] TEMU 100 OFF COUPON BUNDLE [act892435] 100 COUPON CODES [act892435] 1 BUCKS TO PHP [act892435] IS THERE A COUPON IN THE PHILIPPINES [act892435] 100 BUCKS TO PHP [act892435] TEMU $100 OFF COUPON [act892435] TEMU $100 OFF CODE [act892435] TEMU 100 VALUE COUPON BUNDLE [act892435] TEMU COUPON $100 OFF FOR EXISTING CUSTOMERS FREE SHIPPING [act892435] TEMU 100 OFF COUPON CODE LEGIT [act892435] TEMU 100 OFF COUPON CODE REDDIT [act892435] TEMU 100 OFF COUPON CODE FOR EXISTING USERS [act892435] TEMU 100 OFF COUPON CODE UK [act892435] TEMU COUPON CODE $100 OFF FREE SHIPPING [act892435] TEMU COUPON CODES 100 PERCENT OFF [act892435] WHAT IS A HIGH COUPON RATE [act892435] HOW TO CALCULATE COUPON RATE WITHOUT COUPON PAYMENT [act892435] WHAT IS THE COUPON RATE [act892435] HOW TO CALCULATE COUPON VALUE [act892435] USING COUPONS AND REBATES TO LOWER THE PRICE OF AN ITEM IS AN EXAMPLE OF [act892435] TEMU 100 DOLLAR OFF COUPON [act892435] DOMINOS COUPON CODE 100 OFF [act892435] DOMINO'S 100 RS OFF COUPON CODE [act892435] TEMU COUPON $100 OFF EXISTING CUSTOMERS [act892435] WHAT IS 10 OFF 100 DOLLARS [act892435] 100 OFF PROMO CODE [act892435] 1 CASHBACK ON 100 DOLLARS [act892435] IS TEMU 100 OFF COUPON LEGIT [act892435] TEMU COUPON $100 OFF [act892435] TEMU COUPON $100 OFF LEGIT [act892435] WHAT IS A GOOD COUPON RATE [act892435] TEMU 100 VALUE COUPON [act892435] 100 DOLLAR OFF SHEIN CODE [act892435] WHAT IS A ZERO COUPON NOTE [act892435] TEMU 100 OFF COUPON CODE [act892435] TEMU 100 OFF COUPON FOR EXISTING CUSTOMERS [act892435] TEMU $100 OFF CODE [act892435] TEMU 100 OFF COUPON 2024 [act892435] DOMINOS 100 RS OFF COUPON CODE [act892435] WHAT IS A COUPON RATE [act892435] TEMU $100 OFF FOR EXISTING CUSTOMERS [act892435] TEMU $100 OFF FIRST ORDER [act892435] TEMU $100 OFF FREE SHIPPING [act892435]
Last updated: 2024-10-26

Post by janderson on OPC UA Server limitations, large array crashes runtime ^{CODESYS Forge talk (Post)}
What are the limitations of the OPC UA Server? I am trying to get data off my PLC that is acquired at high rates (~50k samples/s) so I am storing them in arrays and trying to get the arrays off the PLC. When I attempt to read a ~200k element array through OPC UA the server and runtime crashes (requiring tools -> update linux arm64 -> start runtime). Is there a better way to get highspeed data off? The ACDatalog library seems a bit irritating to use so I would prefer to go through OPC UA.
Last updated: 2023-08-23

Post by rringo on Function block not autofilling ^{CODESYS Forge talk (Post)}
I am attempting to place a block and make it an Analog sensor. When I go to change the name like in the instructional video on youtube it does not give me an option to autofill the block with a known configuration. This is a problem I have in Codesys 2.5 and 3.5. Did I mess up the install of the program or need to install a library? Any help would be appreciated. https://www.youtube.com/watch?v=PkJYQeIUmIM&t=136s at time mark 2:15ish The first image is what I can do and the second is what the videos function autofills to.
Last updated: 2023-08-24

Post by jinlee on Symbol Configuration ^{CODESYS Forge talk (Post)}
Hi guys, I am working on an old project which using Codesys v2.3 talks to Beijer's screen TA150 (IX-Developer 2.20). Codesys v2.3 is different with 3.5 and Ecockpit. I know how to import the symbols from PLC to HMI for Codesys 3.5 and Ecockpit. However, I do not know how to do it on Codesys v2.3. I know that I can make excel sheet to import and export from the HMI and add whatever I want based on PLC. However, is there any quicker way of doing this? So that I can directly import the symbols (tags) from PLC (Codesys 2.3 to HMI).
Last updated: 2023-08-29

Post by tvm on Web Client (HMI) Disconnects from Webvisu (Weidmuller u-OS) ^{CODESYS Forge talk (Post)}
ok, that's different than our issue then. We're using Schneider Electric M262 PLCs, and we've had it where certain web browsers cause the web server to only allow https connections, but it's not recoverable with a refresh. It usually requires a power cycle or even a full firmware flash. Your issue might have more to do with the timing. I don't know if it helps you, but we normally run our visu task at 200mS, with an update rate of 200mS. Seems to work. I went through this: https://faq.codesys.com/pages/viewpage.action?pageId=112525371 but it really seems like trial and error.
Last updated: 2023-09-06

Post by vformanek on How to access files correctly in Linux ^{CODESYS Forge talk (Post)}
Hello, its still not quite clear to me how to deal with the PLCLogic directory in linux. I have the directory right here: I need to correctly access the files in this folder through CODESYSControl.cfg. Here is my CODESYSControl.cfg where on the first lines there are a few lines: [SysFile] FilePath.1=/etc/, 3S.dat PlcLogicPrefix=1 That means that if I am going to use relative paths its going to go to from the PLCLogic directory right ? For example here: Whitch paths should I use. I cant seem to successfully run any of these aproaches ...
Last updated: 2023-09-08

Post by lraja on Codesys Programming with phyBOARD®-Pollux i.MX8M Plus ^{CODESYS Forge talk (Post)}
Dear All, I am trying to Developing a PLC using phyBOARD®-Pollux i.MX 8M Plus. It is very difficult to find the suitable Codesys control for i.MX8M. I have tried to install CODESYS Control for Linux ARM SL , but unable install it and I am getting the following error, [INFORMATION] Executing SSH command on root@192.168.0.10: Retrieving architecture from package management [ERROR] Expected exit value of command failed: expected 0, received 127 [INFORMATION] Standard output: sh: line 1: dpkg: command not found Kindly check and help phyBOARD®-Pollux i.MX 8M Plus Link : https://www.phytec.eu/en/produkte/single-board-computer/phyboard-pollux/
Last updated: 2023-09-23

Post by ellcap on Did a library update and now can't open project ^{CODESYS Forge talk (Post)}
EDIT: Title was a mistake. Should say now I can't compile / download project. Codesys V3.5SP19 Patch 2. Updated the libraries/packages using the Codesys Installer. I'm hit with this error ------ Build started: Application: ------- Typify code... [ERROR] iecvaraccess, 4.4.0.0 (system): IecVarAccess: C0086: No definition found for interface 'IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): IecVarAccess: C0077: Unknown type: 'IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): Initialize [IecVarAccess]: C0032: Cannot convert type 'IECVARACCESS(iecvaraccess, 4.4.0.0 (system))' to type 'IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): QueryInterface [IecVarAccess]: C0231: Expression of type 'BOOL' expected in this place [ERROR] iecvaraccess, 4.4.0.0 (system): QueryInterface [IecVarAccess]: C0077: Unknown type: 'ITFID_IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): QueryInterface [IecVarAccess]: C0046: Identifier 'ITFID_IIecVarAccess17' not defined Compile complete -- 6 errors, 101 warnings Build complete -- 6 errors, 101 warnings : No download possible
Last updated: 2023-09-25

Post by ofey on Modbus TCP communication ^{CODESYS Forge talk (Post)}
Hi! I tried setting up the PLC I'm working with (Beijer GN-9373) to connect to a modbus master running on a laptop. I have an ethernet connection (via USB-C to ethernet) between the laptop and the controller. I have tried following tutorial on how to set this up. I have added an ethernet device with the IP-address of the PLC. Further I added a ModbusTCP_Slave_Device with default settings. I get the error "Failed to open TCP Port: 1" when I try to go online with the PLC. Earlier I tested the exact same set up with the soft PLC from codesys. I can then read/write values correctly with the Modbus master i have running on the laptop. Hope anybody can help me with this, thanks in advance!
Last updated: 2023-10-06

Sort by relevance or date