Post by seler on Custom button with output status ^{CODESYS Forge talk (Post)}
Just to clarify. Output for lamp will have two inputs: from plc IN (wall switch) and from visu button. Until now I had separate object for visu button and separate for visu lamp. Now I want it to be one object, bulb icone which will change color on lamp status and yet by touching it will change visu button state. Tried "Switch Image" object but there is no way to assign switch var.
Last updated: 2025-11-19

Post by kalmeyer on NO SIGNAL ON POWER_ON FOR STEPPER MOTOR ^{CODESYS Forge talk (Post)}
I WOULD BE GRATEFUL FOR HELP....✔✔✔ I HAVE SPENT A LOT OF TIME ON THIS "SMALL" PROBLEM😢 I HAVE MADE A MC_POWER FOR STEPPERMOTOR. BUT I DO NOT GET A "HIGH" ON THE STATUS OUTPUT EVEN THOUGH PENABLE, PREG AND PDRIVESTART ARE ACTIVATED ( SEE ATTACHED WRONG_1) HAD I MADE SOME ERROR IN PLC_PRG_1..???? (WRONG_2) 1000 THANKS FOR HELP WITH THIS PROBLEM. 👀👀 /KLAUS FROM DENMARK
Last updated: 2025-11-23

Post by msirotkin on EtherCAT status errors ^{CODESYS Forge talk (Post)}
Didn't help. I'm just trying to understand why the errors occur. Are they from the poor driver or from the Linux network stack. That's why I wanted to know how the rxerros and lostframes are counted. Because in other places (like ethtool info) there are no any issues. And the Ethercat device works fine. And it also strange that on the second ethernet port with a different HW and driver Ethercat works better, but still time to time gets such errors.
Last updated: 2025-11-26

Post by bertus on Can't get SMC_SmoothPath to work ^{CODESYS Forge talk (Post)}
Hello all, I am trying to run a XY trajectory from a static G-Code file. Everything works except the smoothing/blending of the corners. My setup: Codesys v3.5sp18 Raspberry Pi 4 CODESYS Control for Raspberry Pi SL, using demo license. Zero axes (only using the interpolator). The order of processing for my decoding is: SMC_NCDecoder (ok) SMC_SmoothMerge (ok) SMC_SmoothPath (not ok) SMC_LimitDynamics SMC_CheckVelocities I created following instances and buffers: fbNCDecoder: SMC_NCDecoder; fbSmoothMerge: SMC_SmoothMerge; fbSmoothPath: SMC_SmoothPath; fbLimitDynamics: SMC_LimitDynamics; fbCheckVelocities: SMC_CheckVelocities; aNCDecoderBuffer: ARRAY[0..49] OF SMC_GeoInfo; // buffer stage 1 (fbNCDecoder) aSmoothMergeBuffer: ARRAY[0..19] OF SMC_GeoInfo; // buffer stage 2 (fbSmoothMerge) aSmoothPathBuffer: ARRAY[0..99] OF SMC_GeoInfo; // buffer stage 3 (fbSmoothPath) aLimitDynamicsBuffer: ARRAY[0..39] OF SMC_GeoInfo; // buffer stage 4 (fbLimitDynamics) My original G-Code file has a lot of short G1 elements but this example, I reduced it to a simple square: N000 G51 D10 N010 G38 O1 N020 G00 X0 Y0 F50 E1000 E-1000 N030 G01 X0 Y-37.5 N040 G01 X-75 Y-37.5 N050 G01 X-75 Y37.5 N060 G01 X0 Y37.5 N070 G01 X0 Y0 N080 G50 N090 G39 O1 In the Codesys CNC settings, I have these instances activated: SMC_SmoothMerge SMC_SmoothPath SMC_LimitDynamics SMC_CheckVelocities And with those settings (and the path-preprocessing button actived), the G-Code viewer shows the square with nicely blended corners (see attached picture). However, when running it on the PLC, it doesn't blend the corners at all. Below the relevant part of my code. The process is started with bDecode. // stage 1: decoding G-code fbNCDecoder( ncprog := square, bExecute:= bDecode, bAbort:= NOT bDecode, nSizeOutQueue := SIZEOF(aNCDecoderBuffer), pbyBufferOutQueue := ADR(aNCDecoderBuffer) ); // stage 2: merge short linear segments fbSmoothMerge( bExecute := bDecode, poqDataIn := fbNCDecoder.poqDataOut, nSizeOutQueue := SIZEOF(aSmoothMergeBuffer), pbyBufferOutQueue := ADR(aSmoothMergeBuffer), piMaxDifference := PI_MAX_DIFFERENCE, usiMaxDegree := 5, wFeatureFlag := 1, wAdditionalParamNumber := 0, dMinimumCurvatureRadius := D_MIN_CURVATURE_RADIUS ); // stage 3: smooth corners fbSmoothPath( bExecute := bDecode, bAbort := NOT bDecode, poqDataIn := fbSmoothMerge.poqDataOut, eMode := SMC_SMOOTHPATHMODE.SP_SPLINE5_MIN_CURVATURE, eAddAxMode := SMC_SMOOTHPATHADDAXMODE.SPAA_NONE, nSizeOutQueue := SIZEOF(aSmoothPathBuffer), pbyBufferOutQueue := ADR(aSmoothPathBuffer), dAngleTol := D_ANGLE_TOL, bSymmetricalDistances := TRUE, bImprovedSymmetricCuts := TRUE ); // stage 4: keep acc/dec and velocity within limits fbLimitDynamics( bExecute := bDecode, bAbort := NOT bDecode, poqDataIn := fbSmoothPath.poqDataOut, wAxis := 16#07, nSizeOutQueue := SIZEOF(aLimitDynamicsBuffer), pbyBufferOutQueue := ADR(aLimitDynamicsBuffer), bIncludePathSettings := TRUE, dMaxVel := 2500, dMaxAccDec := 10000 ); // stage 5: check the path speed fbCheckVelocities( bExecute := bDecode, bAbort := NOT bDecode, poqDataIn := fbLimitDynamics.poqDataOut, dAngleTol := D_ANGLE_TOL); pathQueue := fbCheckVelocities.poqDataOut; // repeat until MaxDuration ... Any idea what I'm doing wrong? Is smooth path supposed to work at all when using a demo license? Thanks.
Last updated: 2025-12-17

Post by tobiassantos on History of Alarms ^{CODESYS Forge talk (Post)}
I am running tests using the Windows runtime environment. The alarm history is not being logged and displays the error: "Some kind of disk I/O error occurred. Check disk space" in the alarm table. Furthermore, it is not possible to export the alarms. I have already tried to find a configuration field in Alarm storage and Alarm configuration to fix this problem, but I haven't found any related fields.
Last updated: 2026-01-05

Post by tobiassantos on History of Alarms ^{CODESYS Forge talk (Post)}
I am running tests using the Windows runtime environment. The alarm history is not being logged and displays the error: "Some kind of disk I/O error occurred. Check disk space" in the alarm table. Furthermore, it is not possible to export the alarms. I have already tried to find a configuration field in Alarm storage and Alarm configuration to fix this problem, but I haven't found any related fields.
Last updated: 2026-01-05

Post by gseidel on Axis directions in CNC editor not using right-hand rule? ^{CODESYS Forge talk (Post)}
Hi bertus, the coordinate systems used in SoftMotion CNC are all right-handed. The CNC editor uses isometric projection. This can be confusing, as in your example. The y-axis seems to point into the screen, away from the viewer. However, this is just an optical effect. If you turn on the (experimental) perspective projection (must be added to the CNC tool bar using tools->customize), you can see that the coordinate system is in fact right-handed. Best regards, Georg
Last updated: 2026-01-07

Post by gseidel on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
Hi aniket-b, the maximum cycle time of the EtherCAT_Task is very high, ca. 35 ms. Could you please check if this is just the first cycle after starting the application or if it happens during motion? (You can reset the times in the task configuration by right-clicking in the "monitoring" tab.) Another thing to try: put the SoftMotion_Planning task on a different core. Best regards, Georg
Last updated: 2026-01-07

Post by timvh on KeyPad Function in Visualization to fill a table ^{CODESYS Forge talk (Post)}
Create an array of STRING and 1 INT variable, e.g.: asMyString : ARRAY[0..9] OF STRING; iIndex : INT; Then place a "Table" object in the visualization: - link this to the string array variable. - Check the option "Use Template" - Then in the Input Configuration - add the "Write Variable" command Somewhere else add a "Combobox, array" - link this to the same array. - And link the index to the INT variable. In the Combobox, you can then select one of the strings from the array. The index variable will indicate which selection has been made.
Last updated: 2026-01-08

Post by gseidel on Mismatch between coordinate monitor and actual motion using SMC_GroupJog2, MC_MoveLinearAbsolute (6DOF) ^{CODESYS Forge talk (Post)}
Dear darwin03, my first guess is that the axis scaling of the last axis (joint 6) is not correct. It should be confiugured so that one technical unit equals one angular degree. From the video, it rather looks like 1 technical unit is a full revolution of the joint. (This holds for all rotary axes used with SoftMotion Robotics: they must be scaled so that one technical unit equals one angular degree.) Best regards, Georg
Last updated: 2026-04-07

Post by dgross on Alarm Manager History Message Missing ^{CODESYS Forge talk (Post)}
Hi All, I'm using a webvisu on a control Win V3 SoftPLC. My issue is with the Alarm Managers Alarm history. It does create entry's and does also show the latch data. But it only shows the message of the active alarms. In the history the message is empty (also in the .csv Export file). The archiving in the alarm group is checked and the Alarm storage is activated. I'm using the Version V3.5 SP22 Patch 1. Do you have any idea where that comes from?
Last updated: 4 days ago

Post by mohi on Connect to Azure IoT Hub ^{CODESYS Forge talk (Post)}
Hello, I try to connect a Controller to Azure IoT Hub using a Root Certificate put on the controller in /etc/ssl/certs und SAS Token for IoT Hub instead of X.509 certificates. The TLS Handshake is successful when I test in terminal using openssl. It seems that the Controller doesn't start this process. I use the Azure IoT Hub library and the Net Base Services. Is there something left or something you can recommend? Best regards Mo
Last updated: 7 hours ago

Post by mohi on Connect to Azure IoT Hub ^{CODESYS Forge talk (Post)}
Hello, I try to connect a Controller to Azure IoT Hub using a Root Certificate put on the controller in /etc/ssl/certs und SAS Token for IoT Hub instead of X.509 certificates. The TLS Handshake is successful when I test in terminal using openssl. It seems that the Controller doesn't start this process. I use the Azure IoT Hub library and the Net Base Services. Is there something left or something you can recommend? Best regards Mo
Last updated: 7 hours ago

Post by wollvieh on SP19 Runtime Zugriff auf lokales Dateisystem ^{CODESYS Forge talk (Post)}
Hallo, hier in diesem Beispiel ist $Download$ ein Platzhalter für den kompletten Pfad /home/pi/Downloads/ auf dem Zielsystem, wo die SoftPlc läuft. In der SoftPlc gibt man dann als Dateipfad und Dateiname wie folgt an : '$$Download$$/Datei.txt' Die Datei Datei.txt wird dann auf dem Zielsystem unter /home/pi/Downloads/ angelegt. Pfade darunter werden auch angelegt, z.Bsp.: '$$Download$$/Ordner1/Datei.txt' Beispiel des Platzhalters: [SysFile] PlaceholderFilePath.2=/home/pi/Downloads/, $Download$
Last updated: 2026-01-22

Post by gseidel on CAM Motion Recover after STO ^{CODESYS Forge talk (Post)}
Dear Mr. Kolev, can you please explain a little more: what happens at an STO? I assume the slave axes will be stopped and retain their current position? How, then, do you call MC_CamIn after the STO? Do you restart it with a new rising edge, but on the same master position as before the STO? Which StartMode are you using, is the cam slave absolute or relative, master absolute or relative? Are the slave axes modulo or finite axes? Best regards, Georg Seidel
Last updated: 2026-02-13

Post by zeljko2212 on Seeking a Code-Based Solution for EtherCAT Slave Dropout or Master Errors in Production (Beyond Software Hot Reset) ^{CODESYS Forge talk (Post)}
PROGRAM RES_ECAT VAR xMP1: INT; xRESTART: BOOL; xFinish: BOOL; xStop: BOOL; pSlave: POINTER TO ETCSlave; TP1 : TP; STS11: WORD; pSlave6: POINTER TO IoDrvEthercatDriverLib.ETCSlave; MP1: INT; TON1 : TON; xSTAT: BOOL; TP_1 :standard.TP; END_VAR TON1(IN:= NOT TON1.Q, PT:= T#300mS ); TP_1(IN:= ton1.Q, PT:= t#2s ); EtherCAT_Master.xRestart := xRESTART; EtherCAT_Master(); EtherCAT_Master(); xFinish := EtherCAT_Master.xConfigFinished; EtherCAT_Master.xStopBus := xSTOP; EtherCAT_Master(); pSlave := EtherCAT_Master.FirstSlave; WHILE pSlave <> 0 DO pSlave^(); IF pSlave^.wState = ETC_SLAVE_STATE.ETC_SLAVE_OPERATIONAL THEN xRESTART := FALSE; ELSE xRESTART := TP_1.Q; END_IF pSlave := pSlave^.NextInstance; END_WHILE
Last updated: 2026-02-14

Post by nehaltrivedi96 on Modbus connection via Qronox PCD3 M6893 ^{CODESYS Forge talk (Post)}
Hello, I am currently scaling 4-20mA signals and the scaled output (temperature) has to be sent via modbus protocol to a tool like doctor modbus or modbus poll. I have defined my inputs as real as and the output is also real, but to send this output via modbus it has to be of word. So how will i convert real into word and then send the generated output via modbus?
Last updated: 2026-02-18

Post by stefan-gimpl on Beobachtungszeitpunkt ^{CODESYS Forge talk (Post)}
Guten Tag, irgendwas ist hier im Argen, die Status werden nicht richtig angezeigt. Im Bild im Anhang wird die Variable in Zeile 16 CollectiveAlarm auf false gesetzt, es wird aber true angezeigt. In Zeile 17 frage ich testweise den Status nochmals ab, der ist auch false, obwohl die Variable CollectiveAlarm noch immer true anzeigt. Was kann hier die Ursache sein? Gibt es einen Beobachtungszeitpunkt, wann die Werte abgefragt werden?
Last updated: 2026-03-04

Post by aapostolidis on _NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch. ^{CODESYS Forge talk (Post)}
Hello, im using dynamic memory allocation with the NEW()-operator. When i instanciate a class with the NEW()-operator and want to debug/watch the interface of the class, the watch is only showing "Hidden Instance" (See attached screenshot). Is there any possibility to debug the interface data ? The interface is working properly but the debugging by the watch is not possible, what is a big disadvantage. Thank you. Best Regards, Alexander
Last updated: 2026-03-24

Post by tommyk-mar on Smooth path is not working with SMC_NCInterpreter ^{CODESYS Forge talk (Post)}
Hello, Im using SMC_NCInterpreter and SMC_NCReadFile2 to read gcode program for CNC machine and what I have observed is that G51 and G52 is not smoothing the path. Machine stops in every point, what could I do to make machine pass through the points without stopping or what could allow me to use smooth path corretly if I use NCInterpreter. Im using it because I want to add variables to my gcode and its not possible directly from the CNC editor thats why I do use external file. Any ideas?
Last updated: 2026-03-26

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Please explain how you configured that. Normaly, the Server should answer to all UID as long as gateway isn't activated. With activated gateway all UID will be forwarded to Serial-Interface, in taht case 255 has to be used for Gateway-Diagnostics. So that means, there is somethink wrong on your configuration. Which CDS-Version, Which Runtime-Version and so on are used.
Last updated: 2026-04-01

Post by darwin03 on Mismatch between coordinate monitor and actual motion using SMC_GroupJog2, MC_MoveLinearAbsolute (6DOF) ^{CODESYS Forge talk (Post)}
Hi Guys!!! I am experiencing an issue when trying to move 6DOF using SMC_GroupJog2 and MC_MoveLinearAbsolute, but I don't understand why, when I jog only X or Y, the coordinate I monitor just changes the X or Y value. It's true, but in reality, Joint6 is still running like the video. Am I wrong somewhere? Many thanks for considering my request.! Video: https://drive.google.com/drive/folders/1vRHQ3AtTO3mijptqZgn5OcP9pyi527Jm?usp=sharing
Last updated: 2026-04-06

Post by transcend on Movesuperimposed Command Aborted Error ^{CODESYS Forge talk (Post)}
Hello everyone, I am building a 3-axis packaging machine. First, I created a virtual axis and connected the knife to the virtual axis using a CAM. I also linked the conveyor system to the virtual axis with GearIn. However, I’m facing the following issue: when I use SUPERIMPOSED to change the conveyor’s motion, I get a COMMAND ABORTED error. The exact error is: SMC_ERROR.SMC_FB_WASNT_CALLED_DURING_MOTION. Why am I getting this error?
Last updated: 2026-04-11

Post by adamrobotic on llcallback() iec exception caught cmpid=0x00000002, eventid=0x00010008 ^{CODESYS Forge talk (Post)}
Hi All, Recently I have been experiencing a issue in CodeSys SP16 Patch 3, with a exception which comes up after I have made several online changes. callcallback() iec exception caught cmpid=0x00000002, eventid=0x00010008, after I experience this fault then I receive a error message for any subsequent online change "online change failed, no task gap within 10000ms". To recover either the controller needs a orgin reset, which will allow online edits thereafter until falling back into the loop. I am using a TURCK TX707 product which is controlling robot trajectory, We have hard coded the coordinate data rather than using persistence variables so hence the need to do online changes consistently. I have read on the forum other people have experienced similar issue with the online task gap, but I have no task which have same priority and also monitored the CPU usage and have not seen it go above 13%. Anyones help would be much appreciated, thankyou.
Last updated: 2023-08-18

Post by ryandmg on Web Client (HMI) Disconnects from Webvisu (Weidmuller u-OS) ^{CODESYS Forge talk (Post)}
Thanks So Much for the reply! Were using the Weidmuller UV66-ADV-10-CAP-W The HMI is pointed to the URL which is assigned through u-OS. Basically when you log into the controller's webserver via browser you can view the installed apps. One of which is the Codesys runtime. When you click on that it takes you to the visualization. That corresponding url is what the HMI is looking for. I apologize I don't have that on hand as I'm in the office right now. I don't think I tried connecting using the port you mentioned and https in lieu of the u_OS URL. I can certainly try. Out of the box the u-OS is set for HTTP. Since we're isolated I havent changed that yet. When this has happened while logged on via chrome on my laptop, simply refreshing brings the visualization right back. In the case of the HMI in kiosk mode, we power cycle the HMI to force a reconnect, log back in u-OS and the visualization is back.
Last updated: 2023-09-06

Sort by relevance or date