Post by fionexyan on Codesys Installation Always Freeze when the installing is almost done ^{CODESYS Forge talk (Post)}
Hello Everyone , I have try in repeatedly with uninstall and reinstall the Codesys software and even turn-off the antivirus application before implement to reinstall the codesys ,but at the consequence the problem still same although go with such method, therefore is there any solution for this issue . Thank You .
Last updated: 2025-05-16

Post by rene2 on How can you get the active frame index from a frame ^{CODESYS Forge talk (Post)}
I think I struggle with the same issue. I tried the currentVisu variable but this is the active Visualisation. I have a dialog with a frame with frame configuration like in the picture. I would like to use the index te be used to make a button look like it's pressed/selected.
Last updated: 2025-10-14

Post by alexgooi on How to protect library project? ^{CODESYS Forge talk (Post)}
Hi aniket-b, If you save the library as a compiled library you are not able to see the source code. When the end user tries to view inside the object, CODESYS will give a notification that the source code is missing, see attachment. In short if you don't send the source code, it will not show.
Last updated: 2024-01-25

Post by jeffersonhui on SysProcessExecuteCommand2 terminate ^{CODESYS Forge talk (Post)}
Hi, I am using the SysProcessExecuteCommand2 function from the SysProcess library to run the candump command in the PLC's Linux environment. However, the candump command stays running indefinitely. If I was running the candump command from a terminal (via PuTTy, etc), that command usually requires Ctrl+C to terminate. Is there a way to terminate a command that is executed with SysProcessExecuteCommand2?
Last updated: 2024-06-24

Post by osande on Trend/trace data ^{CODESYS Forge talk (Post)}
Ok, the problem is that the trend/trace system can't read function block instance data. The variables has to be stored directly under the program calling the FBs. Thus, FB variables to be trended/traced must be connected to variables declared in the program. Seems like a bug to me!
Last updated: 2026-03-13

Post by bdschnapp on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
From Codesys support: The format of the URN is always the same. It's always urn:<vendor>:<product>:OPCUA:Server. What I think you can influence the vendor and product (DeviceName) through settings in the runtime cfg file:</product></vendor> [SysTarget] VendorNameUnicode="T\00E\00S\00T\00" DeviceNameUnicode="t\00e\00s\00t\00" Note that these are 16-bit strings, thus the ASCII padded with nulls
Last updated: 2026-03-17

Post by mrkm-dic on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Hi! thanks for reply. We tested the configuration you proposed as well; however, when the cable between the controller and the switch was disconnected, the Active and Standby roles were swapped. Did you observe the same behavior in your configuration using WAGO and Beckhoff?
Last updated: 2026-02-06

Post by fefefede on Get the numer of day ^{CODESYS Forge talk (Post)}
Hello i tro to create a program to turn on or off the air condition in relationship temperature and numer of day. I can't get the number of day. I try this after installing SysTime library but this not work and have this error on debug ------ Build started: Application: Device.Sim.Device.Application ------- Typify code... Generate code... [ERROR] giorno_accensione_aria: PLC_PRG Device: PLC Logic: Application: C0032: Cannot convert type 'Unknown type: 'SysTimeCore(TRUE)'' to type 'TIME' [ERROR] giorno_accensione_aria: PLC_PRG Device: PLC Logic: Application: C0035: Program name, function or function block instance expected instead of 'SysTimeCore' [ERROR] giorno_accensione_aria: PLC_PRG Device: PLC Logic: Application: C0032: Cannot convert type 'Unknown type: 'DayOfWeek(CurrentTime)'' to type 'INT' [ERROR] giorno_accensione_aria: PLC_PRG Device: PLC Logic: Application: C0035: Program name, function or function block instance expected instead of 'DayOfWeek' [INFORMATION] giorno_accensione_aria: PLC_PRG Device: PLC Logic: Application: C0181: Related position Build complete -- 4 errors, 0 warnings : No download possible PROGRAM PLC_PRG VAR Temperatura: UDINT; AriaCondizionata: BOOL := FALSE; CurrentDayOfWeek: INT; //Variabile Giorno CurrentTime: TIME; GiornoDellaSettimana: INT; DayOfWeek: INT; END_VAR CurrentTime := SysTimeCore(TRUE); // Ottieni l'ora corrente CurrentDayOfWeek := DayOfWeek(CurrentTime); CASE GiornoDellaSettimana OF 1: // Azioni per Lunedì 2: // Martedì se più 10° accend altrimenti spegni IF Temperatura >= 10 THEN AriaCondizionata := TRUE; ELSE AriaCondizionata := FALSE; END_IF 3: // Mercoledì se più di 50° accendi altrimenti spegni IF Temperatura >=50 THEN AriaCondizionata := TRUE; ELSE AriaCondizionata := FALSE; END_IF 4: // Giovedì se più di 40° accendi altrimenti spegni IF Temperatura >=40 THEN AriaCondizionata := TRUE; ELSE AriaCondizionata := FALSE; END_IF 5: // Venerdì se più di 50° accendi altrimenti spegni IF Temperatura >=50 THEN AriaCondizionata := TRUE; ELSE AriaCondizionata := FALSE; END_IF 6: // Sabato se più di 25° accendi altrimenti spegni IF Temperatura >=25 THEN AriaCondizionata := TRUE; ELSE AriaCondizionata := FALSE; END_IF 7: // Domenica sempre spenta AriaCondizionata := FALSE; END_CASE
Last updated: 2023-09-14

Post by wedahitha on Could not open library 'SysSocket23, ^{CODESYS Forge talk (Post)}
Hi there, I am trying to open a codesys project done by someone else and Once I install all the libraries I get this error [ERROR] : Library Manager [PROJECT 01: PLC Logic: Application]: Could not open library 'SysSocket23, * (System)'. (Reason: The library 'SysSocket23, * (System)' has not been installed to the system.) SysSocket23 is a standard library and I also tried using the same OSCAT library which was from the original computer that made this code. Using CODESYS V3.5 SP18 Patch 2 Please help me how to solve this problem.
Last updated: 2023-12-19

Post by totorovic on Softmotion not working with simulation mode ^{CODESYS Forge talk (Post)}
Good morning, I think that the mode Simulation does not support the Softmotion functionnality because it runs the CODESYS process with normal priority wich is not a good thing for real-time behavior. If you want to test your PLC project, please use a Codesys Control Softmotion (and your computer must have the Ethercat driver installed) or much easier, download your code into the C6 Smart. BR
Last updated: 2024-05-13

Post by shabroz-gill on Unable to load boot application on ARMv7 device restart ^{CODESYS Forge talk (Post)}
The boot application already exists on the device, i can see the MPC.app file in the proper place. It is not able to load it on startup though
Last updated: 2023-12-01

Post by simon001 on CAN communication settings for USB2CAN-C ^{CODESYS Forge talk (Post)}
I am using the Innomaker USB2CAN-C device to communicate via CAN in the Windows version of CODESYS, but I am encountering error code 27E2, which indicates that the driver is not found. Could you please advise on how to proceed with the CODESYS settings?
Last updated: 2024-08-18

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
If I select "Update boot aplication" while I download the code the persistent variables got a constant startup value. But during the running I am still not able make the persistent variables to hold they actual value.
Last updated: 2024-09-01

Post by jari-koivuluoma on Problem trying Net Base Services 3.5.15.0 TCP connection ^{CODESYS Forge talk (Post)}
Solved. Just in case that someone else is now to this also. It seems that the xDone of the TCP_Connection FB goes true once client disconnects and then you need to reset the FB by setting the xEnable to false.
Last updated: 2024-10-04

Post by davidf on Error trying to activate the demo Git licence ^{CODESYS Forge talk (Post)}
Just comes up with the attached error dialog. The Git menu in the codesys UI is visible but greyed out.
Last updated: 2024-10-11

Post by arwie on Wish: CODESYSControl.cfg - again ^{CODESYS Forge talk (Post)}
Agree! Me and my customers are buying SL Licences from the store but we don't get proper documentation of the runtime! Only a few hints of the entries in CodesysControl.cfg are spread all over the Internet.
Last updated: 2024-11-26

Post by thn-power on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
I'm wondering the same. Using the old symbol configurator opc ua server gave the node id using a string. Must be a way to specify this at build time?
Last updated: 2024-12-16

Post by yannickasselin on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Not sure this will help you but I had the same issue and was able to activate the license on a Windows PC using the Web Depot in a web browser. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_installing_license.html
Last updated: 2025-01-08

Post by ph0010421 on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello SDO will write to the drive, not the axis, so you need to pass in the ethercat slave: VAR_IN_OUT Axis: IoDrvEthercatLib.ETCSlave; END_VAR Then you can get the address with: Axis.PhysSlaveAddr (as UINT)
Last updated: 2025-03-07

Post by tk096 on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
Hi, in the XYVA compile format the editor is adding an additional point if the derivatives are jumping at this point. However, this should not change the path?
Last updated: 2025-06-30

Post by selim on CNC / G01 Speed is very slow (or go-stop motion) in Continuous short segment . ^{CODESYS Forge talk (Post)}
Hi everyone, i face the same problem. The G-code doesn’t maintain the feed rate. If you don’t mind. can you share the final code?
Last updated: 2025-08-19

Post by dim54 on multiple entry of the Owner password ^{CODESYS Forge talk (Post)}
I have to enter the owner password from time to time, even though I haven't closed the project yet. Is there a way to disable this option? So I only have to enter it once when I log in to the project, and that's it.
Last updated: 2025-10-10

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
I have now renamed my recipe to Parameter and now use SaveRecipeAs. The correct folder is displayed in the dialogue box, but the recipe is not saved. What could be the reason for this, write permissions? Recipe manager buggy?
Last updated: 2023-12-29

Post by reinier-geers on Add licence ^{CODESYS Forge talk (Post)}
Ive got the license dongle. But hey cant see it. When i put in a stick the contoller detects the stick. When i stick the dongle it doesnt detect. So 2 options from codesys who doesnt work
Last updated: 2024-01-05

Post by matt-s on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
I know, that is not the issue though. The issue is the HMI_Blower_Auto_PB variable not changing to false. I do not have the IO modules plugged in yet, that is why there are NaN values for those variables. That should not affect this.
Last updated: 2024-01-25

Sort by relevance or date