[Beaglebone Black] Run python scripts and CoDesys runtime at the same time to control GPIO ^{CODESYS Forge talk (Thread)}
[Beaglebone Black] Run python scripts and CoDesys runtime at the same time to control GPIO
Last updated: 2021-03-17

Going online from 2 different PC. (Not at the same time) ^{CODESYS Forge talk (Thread)}
Going online from 2 different PC. (Not at the same time)
Last updated: 2022-04-13

How to make Codesys start at "running" state after power up ? ^{CODESYS Forge talk (Thread)}
How to make Codesys start at "running" state after power up ?
Last updated: 2020-02-22

Multiple function blocks are not executing at the same time in ladder logic ^{CODESYS Forge talk (Thread)}
Multiple function blocks are not executing at the same time in ladder logic
Last updated: 2024-03-12

Post by fschuler on No connection to Raspberry at runtime installation ^{CODESYS Forge talk (Post)}
Hi, I try to install the Codesys realtime in a Raspberry PI 3B+. When I click on the installation button I get always the message No connection to device: An established connection was aborted by the server. Raspberry 3B+ with newest raspberry PI OS. Codesys 3.5.15 Patch 1 Codesys Runtime Package 3.5.16.20 SSH is activated. I can login with Putty Ping is possible IP address search is possible Just the installation is not started.
Last updated: 2025-07-23

Post by camjam on BOOL variable in OPC UA and modbus simultaneously ^{CODESYS Forge talk (Post)}
I have come across this. The only way i could get it to work would be to define a word that is also the same address as the Bools. eg %MX600.0 through to %MX600.15 would be individually defined in the variables and them have another variable word defined at %MW300. You still need to break out the word in what ever program you are using to read/write the OPCUA tags.
Last updated: 2025-08-18

Post by umair on Code for reading 4 address to get 1 value of sensor (Ethernet IP) ^{CODESYS Forge talk (Post)}
Hi all, I want to ask, how do I write code to read multiple address for Ethernet IP communication protocol? Because this multiple address will produce one reading of a sensor that I am currently using. I want to read the value of the sensor. https://global.discourse-cdn.com/business6/uploads/wago/original/1X/7a79f4ad7ce474b9383b8550356d984defd9f3a0.png The addresses are in Byte. The 4 addresses are 89,90,91,92. Thanks in advance. Best regards, Umair
Last updated: 2024-05-06

Post by andrax on Variable Length Array - Cannot mix variable and fixed length dimensions? ^{CODESYS Forge talk (Post)}
Arrays with variable lengths are a bad idea. This makes your system unstable and can lead to crashes. Declare your array large enough to reserve enough memory
Last updated: 2025-05-24

Post by reinier-geers on Pointer Axis ^{CODESYS Forge talk (Post)}
I want to make a FB of MC. But i need a variable for Axis. How do i have to declare that ? ptAxe : AXIS_Ref_SM3; //:= SM_Drive_ETC_Delta_ASDA_A2 ; this is somehowe a problem
Last updated: 2024-01-12

Post by reinier-geers on Axis declare ^{CODESYS Forge talk (Post)}
In motioncontrol every block start with Axis. How can i make a variable to make my own FB ? Somthink like : _Axe : pointer to Axis_Ref_MC := Axis_1 ;
Last updated: 2024-02-13

Post by dtamm on How to read string from CharBufferPtr? ^{CODESYS Forge talk (Post)}
Solved it! The simple answer was to declare a variable as POINTER TO STRING and assign the GetMessage result to that variable. Then, the ^ operator can be used to extract the message as string.
Last updated: 2024-02-21

Post by naks on Change IP address from IEC code ^{CODESYS Forge talk (Post)}
Hi, I'm working with wago 750-8212 controller. I want to change the IP address of the Ethernet adapter from webvisu. I have read some other threads in this forum and I have tried the following: Added the following text to the config file CODESYSControl.cfg: [SysSocket] Adapter.0.Name="br1" Adapter.0.EnableSetIpAndMask=1 Used the below code : IF xUpdateEthernet THEN Ethernet.Enable := FALSE; Reconfig ( xExecute := TRUE, itfNode := Ethernet, eError => ErrorReconfig, xBusy => xBusy, xDone => xDone, xError => xErrorReconfigure); IF Reconfig.xDone THEN ErrorCode := Ethernet.UpdateConfiguredIPSettings(IpAddress := NewIp, gateway := newGateway, subnetmask := newSubnetmask); END_IF IF Reconfig.xDone OR Reconfig.xError THEN reconfig(xExecute := FALSE); END_IF Ethernet.Enable := TRUE; Reconfig(xExecute := TRUE, itfNode := Ethernet ); END_IF I could change the IP address but when i restart my Controller then the IP address resets to the original, Is there anything I have missed, what else can i try ? Thank you in advance.
Last updated: 2024-07-08

Post by eschwellinger on More information on Device address [0058.A0DE] ^{CODESYS Forge talk (Post)}
no nowadays I would recommend connect by name. Which is the default I guess since some versions.
Last updated: 2024-11-22

Post by felipemsgarcia on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello, Thank you for your answer. I'm afraid I was not clear on what I was trying to achieve. I'm trying to change parameters and command axes from inside a function block and the first thing that came to my mind was pass both the EtherCAT slave and axis to the function block (as image attached). But, I believe it's worse than just pass directly the EtherCAT slave address to the function block (is it???). However I was wondering if there was a way to get the EtherCAT address directly from the axis, so I don't need to pass the EtherCAT slave nor the EtherCAT address to the function block. Thank you again!
Last updated: 2025-03-07

Post by eschwellinger on Error while using UpdateConfiguredIPSettings to change IP address ^{CODESYS Forge talk (Post)}
check the plclog for the error on doing this
Last updated: 2023-12-12

Post by dkugler on How to address visualization change with button press... ^{CODESYS Forge talk (Post)}
you can get the help by yourself in the helpme site: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_move.html
Last updated: 2024-02-13

Post by jinlee on IP address of connected webvisu = 127.0.0.1 ^{CODESYS Forge talk (Post)}
Hi, Did you manage to solve the problem ? I have the same issue of reading 127.0.0.1 only.
Last updated: 2024-03-11

Post by dhumphries on How to address visualization change with button press... ^{CODESYS Forge talk (Post)}
you can configure the button actions in the hotkey tab in the visualization.
Last updated: 2024-03-15

Post by paro on Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Post)}
hi, maybe Net Base Services https://forge.codesys.com/prj/codesys-example/nbs/home/Home/
Last updated: 2024-06-17

Post by davidbo on How to stop dhcpcd and use SysSockSetIpAddressAndNetMask to set address? ^{CODESYS Forge talk (Post)}
The reason for why CODESYS halts was a CODESYS watchdog exception. 'sudo ip' takes a long time.
Last updated: 2025-11-04

Post by adam on Get/Set I/O Address Mapping of DeviceObjects in python Script ^{CODESYS Forge talk (Post)}
Found out.Its script engine bug . Update to script engine version 4.2.0.0. and problem solved
Last updated: 2025-11-17

Post by fabiodasilveira on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
It is a shame that it does not work with Eaton XC303 PLCs :(
Last updated: 2026-06-23

Post by wbj0t on mobus tcp slave device. read/write holdings with 2 variables. ^{CODESYS Forge talk (Post)}
Hi there. I have an issue to read and set time for the controller. In the issue many registers described as writable by 6/16 functions, and, in this time, also(!) readable! For example: I have time registers: min, hour, day, mon, year. By specifications it is possible check time (so I need always update these varibles in loop) and set time by writing these same registers, BUT how to set, if they will immediatle updated by current time after writing? So, I need to separate one address at two variables. I have seen option mark: Overlay of the process image by the holding and input register. I understand this so: When I READ by function 3, I will get variable that connected with the same INPUT address and when I WRITE by 6/16 this will change second variable that connected with HOLDING address. BUT, this mark doesnt work, when I write 6/16 and try to get by function 3, I will get written value instead INPUT variable. So, what to do?
Last updated: 2024-03-20

Post by ahuckphin on Issues with Modbus Slave with Raspberry Pi ^{CODESYS Forge talk (Post)}
codesyscontrol_user.cfg [SysCom] Linux.Devicefile.1 = /dev/ttyUSB0 portnum:=COM.SysCom.SYS_COMPORT1; **parameters are used in the python-script ** method: "rtu" port: "COM8" baudrate: 9600 stopbits: 1 bytesize: 8 parity: 'N' timeout: 1 register address for humidity: 0x000 register address for temperature: 0x001 unit ID: 1 **parameteized in the modbus-master-comport ** see attached files
Last updated: 2024-07-11

Post by dhumphries on WAGO PLC 200 750-8216 Ethernet connection to Codesys 3.5 ^{CODESYS Forge talk (Post)}
make sure the PLC and the programming PC have IP addresses that are on the same subnet, you'll have to know the default address of the PLC or you may need to connect to it with a special cable and use a software tool to set the IP address.
Last updated: 2024-02-06

Sort by relevance or date