Post by dkugler on Modbus RTU Slave ^{CODESYS Forge talk (Post)}
Variablen aktualisieren aktiviert?
Last updated: 2023-12-06

Post by schorge on Modbus RTU Slave ^{CODESYS Forge talk (Post)}
ja
Last updated: 2023-12-10

Post by pr0schwein on Driving the slave axis across master's zero point - caming ^{CODESYS Forge talk (Post)}
Is there a way to move the slave axis across the zero point of the master axis with variable start and stop points? For example: Slave start at 270° and end at 50°. thanks :)
Last updated: 2024-01-18

Post by irshad on Modbus TCP/IP slave communication errow ^{CODESYS Forge talk (Post)}
While reading the value of a slave device, it shows error frequently and i need to restart my PLC for getting the communication back. In codesys it shows the slave in Red color with error status. How to solve the above
Last updated: 2024-02-03

Post by tk096 on gear over gear (2 masters,1 slave) - how to do it? ^{CODESYS Forge talk (Post)}
Hi, you could calculate the position/dynamics of the slave axis yourself and use one of the function blocks SMC_FollowPosition/SMC_FollowSetValues to move the slave axis. https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowPosition.html https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowSetValues.html
Last updated: 2024-08-19

Post by fabian on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Hi all, Is there an update on this topic? Same problem here, I can not add more than 10 Modbus-Slave channels. Is there a workaround? Many thanks! Fabian Codesys 3.5.19 SP2, Modbus 4.3.0.0, Name: Modbus TCP Slave Hersteller: 3S - Smart Software Solutions GmbH Kategorien: Modbus TCP Slave Typ: 89 ID: 0000 0005 Version: 4.1.0.0 Bestellnummer: - Beschreibung: Ein Geraet, das als Slave für einen Modbus TCP Master konfiguriert ist. Version Konfiguration 3.5.11.0
Last updated: 2023-08-28

Post by boehli on canOPEN ^{CODESYS Forge talk (Post)}
Hallo, gibt einen codesys Treiber oder Unterstützung für Hilscher canOPEN Slave oder Master Karten?
Last updated: 2024-05-15

Post by boehli on canOPEN ^{CODESYS Forge talk (Post)}
Hallo, gibt einen codesys Treiber oder Unterstützung für Hilscher canOPEN Slave oder Master Karten?
Last updated: 2024-05-15

Post by dkugler on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
@xiaonyan: open new topic please!
Last updated: 2024-05-17

Post by ahuckphin on Issues with Modbus Slave with Raspberry Pi ^{CODESYS Forge talk (Post)}
duplicate
Last updated: 2024-07-11

Post by eschwellinger on Ethercat Slave - Load PDO From Device ^{CODESYS Forge talk (Post)}
Which CODESYS Version and which EtherCAT Master version?
Last updated: 2024-10-23

Post by eschwellinger on EtherCAT drive not moving ^{CODESYS Forge talk (Post)}
you need to switch to a realtime capable plc. Do not map variables, this will be done by the SoftMotion. And check the Ds402 parameters in the generic parameterview on the Softmotion Connector.
Last updated: 2024-03-05

Using CoDeSys on Raspberry Pi to poll ModbusTCP slave data, and uplink by using LoRaWAN ATIM ACW-XB ^{CODESYS Forge talk (Thread)}
Using CoDeSys on Raspberry Pi to poll ModbusTCP slave data, and uplink by using LoRaWAN ATIM ACW-XB
Last updated: 2019-01-08

Post by fugtwad on Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected ^{CODESYS Forge talk (Post)}
Scan from "IP-Configuration" with PC connected to first EtherCAT slave and "EtherCAT" tick box ticked gives slave info. As does ticking the "Emergency" tickbox.
Last updated: 2024-05-20

Post by wbj0t on What the right way to update TCP/COM slave device holding registers ^{CODESYS Forge talk (Post)}
Hi all :) I have an plc. This plc has option to be as slave device. There are TCP -> Serial Slave Device and COM -> Serial Slave Device. There are 4096 ModBus holding registers with mark "internal modify" for the both devices above. So, COM Slave has 4096 registers and TCP Slave has 4096 registers. And, finally, I have an ARRAY[0..4095] OF WORD. This array glued with COM Slave and TCP slave. Yes, I need plc's opportunity to be communication both TCP and COM ways for the same registers. For example, the next task structure: * TASK_0: 1. pou_READ_Registers 2. pou_0 3. pou_1 4. ... 5. pou_N 6. pou_WRITE_Registers At the first pou I read registers for the other pous, after job we have sort of state of the plc. At the last pou (6) we write modified registers. It is a good scenario: some one wrote registers for the job, after job we save these (modified) registers. But, what if registers wrote between 1 and 6 pou by operator, for example, at the 3 pou -> the last pou 'pou_WRITE' will rewrite this request from operator. What the right way to work with this logic? Thanks you.
Last updated: 2024-07-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus TCP Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by kbucsit22 on Ethercat Slave - Load PDO From Device ^{CODESYS Forge talk (Post)}
Hi All, I am using Control Win V3 x64. Anyone experiences to use Expert mode to map the Ethercat Slave device to press this Load PDO from Device, Pressed first time then nothing happens. Pressed second time then the software crashes. Best regards, Kenneth
Last updated: 2024-10-22

Post by tama00 on Raspberry Pi 4 als SPI Slave ^{CODESYS Forge talk (Post)}
Hallo zusammen, grundsätzlich sollte ja die Möglichkeit bestehen den Raspberry auch als SPI Slave zu nutzen. Leider habe ich kein entsprechendes Projekt gefunden, bei dem dies der Fall war. Kann mir jemand dabei weiter helfen, wie ich bei Codesys Control for Raspberry , die Konfigurationen für den SPI Slave machen kann? Der Master soll ein Microkontroller sein von einem anderen Gerät sein. Ich arbeite noch mit 4.10.0.0 und einem Raspberry Pi 4 Vielen Dank und liebe Grüße
Last updated: 2024-03-19

Post by timvh on Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Post)}
If your Control Win is the Modbus "Master" then your configuration should be something like: Modbus_COM (Serial port) - Modbus Master (this is the Control Win SoftPLC actively setting up the communication) - Modbus Slave (this is then your WAGO 750-315) You need to add channels to the Modbus Slave configuration to inform the master which variables to read/write from the Wago module. The way you configured it now, the Control Win is also a slave. PS, don't forget to put the PLC (Control Win) in Run.
Last updated: 2024-09-03

Post by dkugler on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
rmaas: how do you get the reference of the slave?
Last updated: 2024-02-13

Post by rmaas on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
The reference used is the ethercat slave name. For example in this screenshot the reference would be: EL1809_1
Last updated: 2024-02-13

Post by dkugler on EtherCAT fieldbus ^{CODESYS Forge talk (Post)}
There is an example for activating/deaktivating an optional Slave in the FAQ's: https://faq.codesys.com/pages/viewpage.action?pageId=49283084
Last updated: 2024-04-12

Sort by relevance or date