Impossible to enter en FB from a CFC to debug it: "nProjectHandle: 'xxx' is invalid." error ^{CODESYS Forge talk (Thread)}
Impossible to enter en FB from a CFC to debug it: "nProjectHandle: 'xxx' is invalid." error
Last updated: 2023-02-23

Any ways to prevent Infinite scroll when moving an object to the left or top edge? ^{CODESYS Forge talk (Thread)}
Any ways to prevent Infinite scroll when moving an object to the left or top edge?
Last updated: 2025-10-24

Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Thread)}
Which Lib to use, connect to a socket with URL instead of IP address
Last updated: 2025-11-12

CodeSys OPC UA client Unable to Connect To OPC UA sever through Username and password ^{CODESYS Forge talk (Thread)}
CodeSys OPC UA client Unable to Connect To OPC UA sever through Username and password
Last updated: 2026-05-07

Two licenses have to be installed forgot to enable one license ^{CODESYS Forge talk (Thread)}
Two licenses have to be installed forgot to enable one license
Last updated: 2026-02-03

Post by malie on 3.5.19.7 Alarme importieren in Gruppe funktioniert nicht ^{CODESYS Forge talk (Post)}
Hallo, ich hab das Problem eine Alarmliste nachdem exportieren mit oder ohne Eweiterung der Liste wird nicht wieder importiert. Unter Meldungen "Import von Alarmen" steht: "Ein Element mit dem gleichen Schlüssel wurde bereits hinzugefügt.(Zeile 0, Spalte 0)" "Import der Alarme erfolgreich abgeschlossen" Es erscheinen aber nirgends die Alarme, in vorherigen Versionen hat das immer ohne Probleme geklappt. Auch ein ändern der ID und der anderen Spalten, hinzufügen und entfernen von Spalten hat leider nicht geklappt. Selbst wenn ich eine Zeile in der Alarmgruppe erstelle die Funktioniert, diese exportiere, die Zeile lösche und wieder importiere kommen immer die gleichen Meldungen und kein Alarm wird importiert. Ich hab die Funktion schon länger nicht mehr gebraucht, deshalb kann ich nicht sagen seit welcher CoDeSys Version die Funktion nicht mehr funktioniert. Hat hier jemand eine Lösung? Gruß Max
Last updated: 2025-02-06

Post by jaspergain on SoftMotion Axes issue ^{CODESYS Forge talk (Post)}
Dear, We have an issue with SoftMotion and it's licensing. We don't use SoftMotion in this project. But a SoftMotion license is required by it. The License metrics tell's us there is a -1 Axes. Is there a way to reset this? Delete this? There was a MotionControl device in the project, but we have deleted this. But it stayed at -1. Thanks for you help.
Last updated: 2024-02-29

Post by k4zz on Static Code Analysis ^{CODESYS Forge talk (Post)}
I've already experimented with two methods, but unfortunately, they only function with projects of type *.project. Consequently, when executing: system.commands["staticanalysis", "run"].execute() For the 2nd Option: You'll need to ensure that in the Static Analysis Settings, the option "Perform static analysis automatically after compilation" is checked. # get Project values myProject = projects.primary # Creates an active application app = myProject.active_application # build Application and run static code analysis app.generate_code()
Last updated: 2024-03-15

Post by sercan on Connecting Parameter 'A' in G-Code to Physical Axis in CNC Project ^{CODESYS Forge talk (Post)}
I want to run the following command by linking it to the A-Axis: G01 A45.0 Which TRAFO should I use to do this? SMC_TRAFO_5Axes and SMC_TRAFO_GantryCutter3 function blocks did not work! For example, when SMC_TRAFO_5Axes is used, parameters B and C can be resolved by the transformer. However, parameter A cannot be resolved. Only SMC_Interpolator displays the value of parameter A in the SMC_Interpolator => piSetPosition.dA output. Should I drive this axis with SoftMotion commands (MC_MoveAbsolute etc.)?
Last updated: 2025-05-07

Post by mp9876 on Device User Logon ^{CODESYS Forge talk (Post)}
Just adding some info regarding the issue above. Logged onto the project using dev3og5 user (see screenshots); appeared to be ok although when attempting to logon to the device message says 'currently not authorized to perform this operation on the device' (screenshot). If user dev3og5 has same permissions as Owner user; why would it not be authorized. I am at a loss; any assistance would greatly be appreciated. Thank you Mike
Last updated: 2024-03-16

Post by mozed on Signature verification faited fro the following package ^{CODESYS Forge talk (Post)}
Good morning, I'm trying to open a project but codesys tells me that there are certain packages that I don't have and that I need to download them. Once the installation of the packages begins, it shows me a error that the signature of certain packages does not correspond to that coming from the accepted installation context. Do you have a solution to my problem please, it is very urgent in my work. Sincerely
Last updated: 2024-06-11

Post by shaun on GAMP 5 and 21 CFR Part 11 ^{CODESYS Forge talk (Post)}
Good day I have been asked to do a project. It is for a pharmaceutical application and data needs to be logged. The spec calls for the control system to comply with GAMP 5 and 21 CFR Part 11. From what I can find online it's got to do with electronic records and validation. Has anyone developed any software using this or are there codesys librarys that can make my life easier in writing this code
Last updated: 2025-10-22

Post by drbuzz on Communication Error (#0) for IFM controller ^{CODESYS Forge talk (Post)}
Hi Folks, Every time I use an IFM controller I always seem to run into a problem connecting to it. I get the Communications Error (#0). So I thought I would share some tips and tricks. Once the CANfox Cable (EC2112) cable driver is installed, you can use the yellow app in the sys tray to blink the lights on the cable. Confirm the cable works in the IFM maintenance software by connecting to the controller and reading the information on it. Make sure to download an OS into the controller (the light will go from a fast blink to solid green). In Codesys V2.3, the communication settings for the CR0401 is 250kBaud by default and Node ID 127. What got me, was I needed to reboot the computer after the cable driver install. Also if your application has canbus settings in it which are changed from default, after the controller is power cycled, the new Node ID and Baud will be in effect. I made a handy guide because too much time has been wasted on this. Programming IFM CR0401 Serial/Can Programming Cable • Connect IFM EC2112 CanFox programming cable with connector adapter. • Make sure cable is linked to VM (if using VM). • Install drivers for cable if not installed. o Download from IFM EC2112 site. https://www.ifm.com/ca/en/product/EC2112 • Once Installed, reboot computer. • In system tray, there should be a yellow icon that you can open and check on programming cable. Select the cable in the list and flash the lights to confirm it is working. Maintenance Software • Install IFM Maintenance Tool Software. o Download from IFM Site. https://www.ifm.com/ca/en/download/eco100_MaintenanceTool • Open IFM Maintenance software • Select Basic System • Select CAN cable • It will tell you if you don’t have a cable connected. • Use Wizard if needed. • Read Channel Parameter on the Settings page, or get Identity in the System Information > Identity. • Default Node is 127 on a new unit. Baud is 250kBaud (bits/sec) • Controller information should populate. • Controller green light should be blinking at 5hz (meaning OK but no OS, just bootloader). • Click Software > Load. • Open the OS file. Should match Codesys version selection (for CR0401 this is version 3). o Download OS file from IFM Website. https://www.ifm.com/ca/en/product/CR0401 o It is located at the top of the download under “software for CR0401”. o Select the file and load it… this will take a minute. • Once completed the unit should now have a solid green light o Solid green means the controller has an OS but no application is running. Codesys V2.3 Application • Codesys needs to be downloaded and installed from the IFM website as it has the IFM libraries and license to use the software. o Download from the IFM CR0401 page. o https://www.ifm.com/ca/en/product/CR0401 • Create new application with the correct IFM controller or Open Codesys application. • Keep in mind that the PLC Configuration on the Resources tab can be changed for the CAN communication interface… so changes to node and baud will take effect after the first download and reboot of the controller. • Go to “Online” in the top menu and change “Communication Parameters” o The Local dropdown shows the last configuration used. All other interfaces will show below it and need to be updated when changed or used. o Confirm Node ID is 127 for the first download.  The NodeID will change to whatever the program has after (in my case 125).  Node Send Offset should be default at 1536  Node Recv Offset should be default at 1408  Can bus Baudrate should be 250 kbaud.  Yes to Motorola Byte Order  Block Transfer should be false and note used (60 is default setting).  Can Card Driver should match the systray item which is Sie_USB. • If the system populated the other one, just update and relay the communication parameters. The software will usually bring up the available cable and driver. • Go to “Online” and Login to download. o Press Yes to Download Application. I hope this helps!
Last updated: 2025-03-21

IMAGE DISPLAY ACCORDING TO INPUT VARIABLE ^{CODESYS Forge talk (Thread)}
IMAGE DISPLAY ACCORDING TO INPUT VARIABLE
Last updated: 2023-09-12

Retain memory change to ZERO ^{CODESYS Forge talk (Thread)}
Retain memory change to ZERO
Last updated: 2023-09-19

Moved To: Control double acting valve ^{CODESYS Forge talk (Thread)}
Moved To: Control double acting valve
Last updated: 2016-10-18

SoftMotion interface to analog axes ^{CODESYS Forge talk (Thread)}
SoftMotion interface to analog axes
Last updated: 2016-12-08

Lock usb port to a device ^{CODESYS Forge talk (Thread)}
Lock usb port to a device
Last updated: 2017-06-07

RFC2217 Serial to Ethernet devices ^{CODESYS Forge talk (Thread)}
RFC2217 Serial to Ethernet devices
Last updated: 2017-08-03

Login-to-PLC problems ^{CODESYS Forge talk (Thread)}
Login-to-PLC problems
Last updated: 2016-09-21

Bit access to DWORD Variable ^{CODESYS Forge talk (Thread)}
Bit access to DWORD Variable
Last updated: 2019-12-18

Raspberry Pi to Codesys 2.3 ^{CODESYS Forge talk (Thread)}
Raspberry Pi to Codesys 2.3
Last updated: 2014-01-29

modbus from serial to tcp ^{CODESYS Forge talk (Thread)}
modbus from serial to tcp
Last updated: 2017-06-05

Logging to a SoftPLC remotely? ^{CODESYS Forge talk (Thread)}
Logging to a SoftPLC remotely?
Last updated: 2020-10-02

LoadFile - delete button goes to exception ^{CODESYS Forge talk (Thread)}
LoadFile - delete button goes to exception
Last updated: 2018-11-23

Sort by relevance or date