Post by simone on Preferred way of managing Ip-adress/es for linux (debian) host?
CODESYS Forge
talk
(Post)
Hi pernockham, I think you should ask your device vendor. For some time I used one from an Italian company where they had made a library where you can manage the ip with a function (something like SetIPAddr...), it was based on connmann on linux. From my little experience is better to use the "default" way, so for me is to manage the config file on interfaces or use the ip addr utility
Last updated: 2025-03-24
Post by sigurdrb on Network log messages
CODESYS Forge
talk
(Post)
Hi, I'm having some trouble with an OPC client connecting to the PLC. It could be that the problem is on the client side of things. The PLC have UPS power, but the switch and OPC client does not. It could explain some of the log messages. Could any of you help debugging by the log messages in the attachment? And if possible point me to the right library that explains the different messages? Thanks for all the help.
Last updated: 2025-09-11
Post by astutoski on MCP23017: inputs OK, but outputs won’t switch (CODESYS on Raspberry Pi)
CODESYS Forge
talk
(Post)
Hi everyone, I’ve connected and configured an MCP23017 over I²C on a Raspberry Pi using the available CODESYS/RPi library. Input reading works fine (I can reliably read a digital input). However, I can’t get any output pin to change state. Example: when I try to drive PB0, the watch shows MCP23017.Out_B.0 = TRUE (1), but there is no actual output on the pin (no voltage change). Anyone solved this?
Last updated: 2025-09-17
Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023
CODESYS Forge
talk
(Post)
Hi everybody We are currently working on a project with an RS232 serial COM interface and using the CAA SerialCOM library. We have it working fine reading and writing data, although we have found an issue we cannot resolve and any suggestions would be helpful. We have noticed that after a while the RS232 stops working. We have tracked this down to the HANDLE hCom keeps increasing and when this reaches 1023 the COM returns an unknown error "5003". Is there a way to reset this hCom reference? Thanks Richard
Last updated: 2024-03-22
Post by pjoret on IFM CR711S Can Low Level Library Use
CODESYS Forge
talk
(Post)
Hello, I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part. I already use it on the Standard part and it works properly. I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ? And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It. Have a nice Day.
Last updated: 2024-04-03
Post by esave on Softmotion Axis Controll
CODESYS Forge
talk
(Post)
Hello everybody I have two of these EtherCat CiA402 stepper driver from Leadshine: https://www.leadshine.com/product-detail/EM3E-556E.html I want to controll them. I already have implemented them in Codesys with Softmotion. I see the position, the velocity and the status word so I can read everything. See picture 1. But when I want to write something like MC_Power or MC_MoveAbsolut with the SM3_Basic library it wont work and with the MC_Reset POU it shows: "SMC_R_DRIVE_DOESNT_ANSWER". See picture 2. Can somebody help me? Thanks a lot esave
Last updated: 2024-05-24
Post by jgalaska on SMC_Trafo 6DOF Config Error
CODESYS Forge
talk
(Post)
Hello, Recently I was trying to run 6DOF robot in codesys via SMC_Trafo_ArticulatedRobot_6DOF, unfortunately no matter what parameters I tried, it always outputs InvalidConfig Error. I saw the same issue in a topic: https://forge.codesys.com/forge/talk/Motion/thread/16e1f0327f/ But if I understand correctly, the user solved it by developing his own version of this block. I wanted to know if it is a bug in the library (SM3_CNC 4.20.0.0) or am I doing something wrong? Can anyone confirm that they can use the FB without it reporing the Error? Kind regards,
Last updated: 2026-01-21
Import RsLogix 5000 project to Codesys
CODESYS Forge
talk
(Thread)
Import RsLogix 5000 project to Codesys
Last updated: 2023-09-07
IMAGE DISPLAY ACCORDING TO INPUT VARIABLE
CODESYS Forge
talk
(Thread)
IMAGE DISPLAY ACCORDING TO INPUT VARIABLE
Last updated: 2023-09-12
Retain memory change to ZERO
CODESYS Forge
talk
(Thread)
Retain memory change to ZERO
Last updated: 2023-09-19
Moved To: Control double acting valve
CODESYS Forge
talk
(Thread)
Moved To: Control double acting valve
Last updated: 2016-10-18
SoftMotion interface to analog axes
CODESYS Forge
talk
(Thread)
SoftMotion interface to analog axes
Last updated: 2016-12-08
Lock usb port to a device
CODESYS Forge
talk
(Thread)
Lock usb port to a device
Last updated: 2017-06-07
RFC2217 Serial to Ethernet devices
CODESYS Forge
talk
(Thread)
RFC2217 Serial to Ethernet devices
Last updated: 2017-08-03
Login-to-PLC problems
CODESYS Forge
talk
(Thread)
Login-to-PLC problems
Last updated: 2016-09-21
Bit access to DWORD Variable
CODESYS Forge
talk
(Thread)
Bit access to DWORD Variable
Last updated: 2019-12-18
Raspberry Pi to Codesys 2.3
CODESYS Forge
talk
(Thread)
Raspberry Pi to Codesys 2.3
Last updated: 2014-01-29
modbus from serial to tcp
CODESYS Forge
talk
(Thread)
modbus from serial to tcp
Last updated: 2017-06-05
Logging to a SoftPLC remotely?
CODESYS Forge
talk
(Thread)
Logging to a SoftPLC remotely?
Last updated: 2020-10-02
LoadFile - delete button goes to exception
CODESYS Forge
talk
(Thread)
LoadFile - delete button goes to exception
Last updated: 2018-11-23
Unable to import device description error
CODESYS Forge
talk
(Thread)
Unable to import device description error
Last updated: 2021-07-29
PFC200 Update to 4.9.0.0 - No Connection
CODESYS Forge
talk
(Thread)
PFC200 Update to 4.9.0.0 - No Connection
Last updated: 2023-09-27
PFC200 Update to 4.9.0.0 - No Connection
CODESYS Forge
talk
(Thread)
PFC200 Update to 4.9.0.0 - No Connection
Last updated: 2023-09-28
eCockpit - unable to start simulation
CODESYS Forge
talk
(Thread)
eCockpit - unable to start simulation
Last updated: 2023-10-20
User Management - REFERENCE TO VisuUserMgmtProvider
CODESYS Forge
talk
(Thread)
User Management - REFERENCE TO VisuUserMgmtProvider
Last updated: 2023-11-17
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.