Of course there is! =) just edit file/etc/ssh/sshd_config and restart ssh service. but you'll lose the possibility of runtime management through "update Linux", so there enother question - how to change default port in codesys it-self?
Hi, Got same problem, appeared after 4.3.1.0 update. Prabably problem is in performance. I am using virtual machine, so adding one more core and several GB to RAM still not solved, but atleast did system more stable. Try optimise your main program or set less task interval. Regards, I will be your mate in solving this mistery =)
Hi. Not shore, but looks like problem was on Ethernet switch through which connection was. Actually ping was jumping on 300ms and more. So problem was solved by connecting straight on Ethernet port it'self. Got lesson to check your periphery =)
Hello! Got Another issue... I was able to use my early method of connection to profinet slave ( https://forge.codesys.com/forge/talk/Runtime/thread/c7f677ad27/#86e2 ) and everything was fine until I used windows hyper-v server (almost same as proxmox virtual environment on ubuntu server, but on windows server). For some reason proxmox hangs up on rebooting and have very long start on this mini-pc, so it cannot be used. After virtual plc starts, all the connected devices after 20 seconds keep sending...
Hello! Got Another issue... I was able to use my early method of connection to profinet slave (https://forge.codesys.com/forge/talk/Runtime/thread/c7f677ad27/#86e2) and everything was fine until I used windows hyper-v server (almost same as proxmox virtual environment on ubuntu server, but on windows server). For some reason proxmox hangs up on rebooting and have very long start on this mini-pc, so it cannot be used. After virtual plc starts, all the connected devices after 20 seconds keep sending...
hello! With over ~100 adapters i got new issues: - if scanner have more then ~20 adapters, connected devices over ~20 gone failed with error about buffer size, so now I have 5 scanners with 20 adapters each; - with such number of adapters, time by time got connection timed out. The only way for now is to change timeout value on each adapter, so I want to assign a single parameter somewhere. - with changing IP addresses of adapters they are hunging-up with error 100 (Duplicate Forward Open), but it...
Need to set IO task
Hollo! I have several controllers with same program. By default for each controller PN_Controller is "controller" and it conflicts with error "invalid station name". I don't want connect to each of them and change names manually. I want to set Name dependence from IP, e.g. "controller-1-120". Is there any way to do it? Thanks.