Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by simonh on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
Hello, did you find the solution for the communication?Has the communication between the two been successful? if yes, can you please share me your solution since i have similar issue now. Thanks.
Last updated: 2024-04-04

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hi, I am facing the same issues. I've tried it with codesyscontrol version 4.10.0.0 (codemeter version 7.60.5625.503) and with version 4.11.0.0 (codemeter version 8.0.5967.500). @eschwellinger, can you send me also a preliminary version of it, please? Thanks in advance
Last updated: 2024-04-09

Post by mibkid17 on Ethernet Adapter message: Adapter configured. Open all connections ^{CODESYS Forge talk (Post)}
Trying to control 525 with codsys the info from C-4 section. i should input the value in user defined parameters? in the generic device
Last updated: 2024-04-09

Post by januar on Trend recording build error - the variable "arrTraceMgrVariablesImpl" is too large ^{CODESYS Forge talk (Post)}
Hi Adel, No, I just update all to the latest version and it is working. Kind regards, Januar
Last updated: 2024-04-10

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I've added some additional log output. Maybe this helps in figuring out the root cause. I've turned logging and verbose mode on for the CodeMeterLin application and I get the error, that some entry is not found.
Last updated: 2024-04-11

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
Hi francoinf, I've the similar problem and similar configuration. I did with an Arduino Board loaded by a ModbusRTUServer application on it. What I've notice is the slowly acquisition when release the digital signal (e.g. pin2) when it gets off. Anyone have suggestion?! Thanks
Last updated: 2024-04-13

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
[Update]. My issue's solved, I applied the resistors in Pull-down configuration on each digital input. In thus configuration never happened "floating or delaying" acquisition on SoftPLC/Arduino Board.
Last updated: 2024-04-15

Post by dgdamt on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
Hello, In my case all was ok on the BeagleBone side (OPC server) but wrong on the client side (was OK with UA Expert who manage properly its own certificates. I finnaly removed all security settings
Last updated: 2024-04-16

Post by dkugler on I want to convert a WORD to a hex string like 15.432 to '3C48' ^{CODESYS Forge talk (Post)}
you try to convert a WORD with BYTE_TO_HEX directly? Using https://de.helpme-codesys.com/ lead to the SM3_shared lib. There is a function: https://content.helpme-codesys.com/en/libs/SM3_Shared/Current/SM3_Shared/StringFormat/Word_To_HexString.html
Last updated: 2024-04-19

Post by damian177 on RevPi piBridgeRight not found in project. ^{CODESYS Forge talk (Post)}
Hi, Like in tpoic I hahe a problem with running DIO on RevPi Core SE working with Codesys. Look in attachments. Any idea how solve the problem ?
Last updated: 2024-04-27

Post by k2saki on Discontinuity of A/B/C axis movement. ^{CODESYS Forge talk (Post)}
Hello. Good morning. I have a same problem with short-segment G01 in GCode even in XY Axis. ( I'm using SMC_ReadNcFile2, SMC_NcInterpreter, SMC_CheckVelocities before IPO , watching Youtube tutorial video.. ) How did you solve this problem ?
Last updated: 2024-04-29

Post by alex2 on Codesys SVN ^{CODESYS Forge talk (Post)}
Thank you for your answer. So i assumed correctly... And yes thats pretty expensive... Having to pay that much only for SVN / Git. we will look for that.
Last updated: 2024-04-29

Post by yannick on Raspberry PI 5 not working ^{CODESYS Forge talk (Post)}
Thanks for your quick help. It's working until I do a reboot of the raspberry PI. After that it goes back to 2024-04-20. How's that possible?
Last updated: 2024-04-29

Post by gseidel on CNC / G01 Speed is very slow (or go-stop motion) in Continuous short segment . ^{CODESYS Forge talk (Post)}
Hi k2saki, 1.SMC_ReadNCFile2 2.SMC_Interpreter 3.SMC_SmoothMerge 4.SMC_SmoothPath 5.SMC_CheckVelocities I attached a simple example project. Best regards, Georg
Last updated: 2024-04-30

Post by davelewis104 on J1939 SA ^{CODESYS Forge talk (Post)}
I am curious if there is a function block or function that will allow me to monitor the J1939 CANBus and pull out all of the SAs that are on a particular bus, without having to have them loaded in the J1939 manager?
Last updated: 2024-04-30

Post by k2saki on CNC / G01 Speed is very slow (or go-stop motion) in Continuous short segment . ^{CODESYS Forge talk (Post)}
Hi Georg. Thank you so much ! Your advice is really helpful for me. I appreciate your great help.
Last updated: 2024-05-01

Post by hyet on IoDrvModbusTCP_Diag not defined when using MODBUS ^{CODESYS Forge talk (Post)}
Currently seeing the same issue here, with a project moved from 3.5.19. Diving into it too to see if i can find the cause
Last updated: 2024-05-01

Post by bryandimino on OPC Da Server Code Meter Issues after Enabling License ^{CODESYS Forge talk (Post)}
Additionally the license is loaded on the soft storage for my device but it shows up as invalid. I just activated it today.
Last updated: 2024-05-02

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
It is either my installation is bad, or there is a bug. I re-created the project in 3.5 SP19 and there are no errors or warnings. Compiles with no errors or warnings. The original was done in 3.5 SP20. Thoughts?
Last updated: 2024-05-03

Post by corriibme on Profinet IO-link master - IODD files ^{CODESYS Forge talk (Post)}
I am having the same problem right now. Could you please share more information if you were able to solve the problem?
Last updated: 2024-05-05

Post by mxj262 on FB having single input but initialized with Array ^{CODESYS Forge talk (Post)}
I am adding elements of an ARRAY using pointer to access each element inside a FOR loop and the FOR loop does not stop! What is the right way to use pointers in such case?? I have another loop that is not using pointer and it stops but the loop using pointer keep on adding. METHOD FB_Init: BOOL VAR_INPUT bInitRetains: BOOL; // TRUE: the retain variables are initialized (reset warm / reset cold) bInCopyCode: BOOL; // TRUE: the instance will be copied to the copy code afterward (online change) END_VAR VAR_IN_OUT // basically REFERENCE TO window_buffer: ARRAY [*] OF INT; // array of any size END_VAR THIS^.windowPtr := ADR(window_buffer[0]); THIS^.windowSize := UPPER_BOUND(window_buffer, 1) - LOWER_BOUND(window_buffer, 1) + 1; FUNCTION_BLOCK FB500 VAR_INPUT END_VAR VAR_OUTPUT END_VAR VAR windowPtr: POINTER TO INT; windowSize: DINT; currentIndex: UINT; element1:INT; element2:INT; i:INT; j:INT; sum:DINT:=0; END_VAR element1:=windowPtr[0]; // read the first element of the Array dynamic memorry element2:=windowPtr[1]; FOR i:=0 TO (TO_INT(windowSize-1)) BY 1 DO // this loop does not stop Sum:=sum + windowPtr[i]; END_FOR FOR j:=0 TO 5 BY 1 DO // this loop stops j:=j+1; END_FOR https://ibb.co/k3DhkZT
Last updated: 2024-05-06

Sort by relevance or date