Post by pharus on Setup problems with PiXtend ^{CODESYS Forge talk (Post)}
Hello all, I have an PiXtend V2L complete kit and installed everything like in the manual. Ive installed Codesys V3.5 S20 Codesys Control for Raspberry Pi PiXtend_V2_Professional_for_CODESYS.package But as soon as i Create a Project, i get a lot of error messages, and i cant find the PLC via Ethernet Thanks a lot
Last updated: 2024-06-19

Post by felipemsgarcia on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello all, I still couldn't find the answer. I wanted to know is if there is a generic EtherCAT slave object already in CODESYS that I can use for anything, remote IO, Drives, VFD's and so on, as long as I match PDO's. Is there such an object? Thank you!
Last updated: 2024-06-20

Post by kuegerls on SysProcessExecuteCommand2 and CANopen Device ^{CODESYS Forge talk (Post)}
I have now conducted some tests. The problem occurs when the Python script establishes an OPCUA connection, even if I only establish the connection without reading or writing any data. Is there another way to exchange data between Python and CODESYS without having to put in a lot of effort?
Last updated: 2024-06-24

Post by xabier on License Activation Problems ^{CODESYS Forge talk (Post)}
I bought two license and install with out problems....but the problem was when i changed the image in my controler and when i want activated again the license i have a problem Appear this 2 softcontainer and i can´t install any license again... Can someone help me please?
Last updated: 2024-06-24

Post by jeffersonhui on SysProcessExecuteCommand2 terminate ^{CODESYS Forge talk (Post)}
Hi, I am using the SysProcessExecuteCommand2 function from the SysProcess library to run the candump command in the PLC's Linux environment. However, the candump command stays running indefinitely. If I was running the candump command from a terminal (via PuTTy, etc), that command usually requires Ctrl+C to terminate. Is there a way to terminate a command that is executed with SysProcessExecuteCommand2?
Last updated: 2024-06-24

Post by rschwager on GVL to SHMem ^{CODESYS Forge talk (Post)}
Hallo! Have some any idea to transfer whole GVL to Shared Memory? I also shared REATIN memory to shraed meory for making a Retain Backup System without USP in Linux on a FRAM. For an other Application we want to shared the whole GVL off obne part (e.g. GVL_Test). How cvan I get easy the Size and the Address for meory copy?
Last updated: 2024-07-09

Post by stiller on OPC UA RPI 4.8.0.0 Status Code / "out of range" ^{CODESYS Forge talk (Post)}
Hello, I have an OPC-UA server with an information model. For many values, there is a defined range (e.g., 0 to 100). If a client enters a value outside this range (e.g., 120), the StatusCode should change to Bad. How can I accomplish this? Any help is appreciated! Thank you in advance. Best regards, Christian Stiller
Last updated: 2024-07-10

Post by mos89p on CodeSysControlWinV3x64 ^{CODESYS Forge talk (Post)}
Hello Check: on the latest version the location change: If the PLC is started with the "CODESYS Control Win SysTray PLC Control", it runs in the Windows user account "LocalSystem" and therefore the effective working directory is "C:\Windows\system32\config\systemprofile\AppData\Roaming\CODESYS\" or "C:\Windows\SysWOW64\config\systemprofile\AppData\Roaming\CODESYS\". An administrator account is required to access these folders
Last updated: 2024-07-11

Post by tk096 on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Hi, I suppose that you are referring to the error code "SMC_FB_WASNT_CALLED_DURING_MOTION"? Starting of Softmotion version 4.15.0.0 the instance path of the function block that has not been called is logged into the device log. This might help you to identify why it has not been called.
Last updated: 2024-07-18

Post by mmpl on Array to String ^{CODESYS Forge talk (Post)}
I would like to create one large JSON string from an array of objects, where each object contains a value. My current approach involves using a for loop and string concatenation, but with 20,000 elements in the array, this method takes almost 7 seconds and negatively affects the PLC scan time. Is there a more efficient way to accomplish this?
Last updated: 2024-07-18

Post by mmpl on Array to String ^{CODESYS Forge talk (Post)}
I would like to create one large JSON string from an array of objects, where each object contains a value. My current approach involves using a for loop and string concatenation, but with 20,000 elements in the array, this method takes almost 7 seconds and negatively affects the PLC scan time. Is there a more efficient way to accomplish this?
Last updated: 2024-07-18

Post by timvh on Array to String ^{CODESYS Forge talk (Post)}
The new (UTF8) string library is faster and can handle large strings. https://content.helpme-codesys.com/en/CODESYS%20String%20Libraries/_strlib_start_page.html PS, in CODESYS, the maximum string length is not 255 characters. The String functions of the standard library are limited to strings of 255 characters. But you can use other (memory) functions to handle strings larger than 255 characters.
Last updated: 2024-07-22

Post by marks on Regarding trend storage access error ^{CODESYS Forge talk (Post)}
I had this problem when running the application as a Simulation. When I wrote it to the Pi all worked as expected. If this isn't the case for you, we've seen some issues with sqlite on the Pi's - so reset Origin and re-download may help in that case. Good luck, Mark
Last updated: 2024-07-24

Post by jmfernandes on OpenDir always in error ^{CODESYS Forge talk (Post)}
Thanks for the answer Tim. I am using the codesys version 3.5 SP16, is this also affected or only after version 19? But now at leastI know that is an acess problem to the file and not something else. Unfortunately the link you posted on 2023 are now dead, but I will investigate!
Last updated: 2024-08-01

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Hello, I using codesys motion with Parker servo (without brake). In my application i use mc_moverelative. When i send new position motor moves. But when it arrives to the point it stops and does not hold the position. It means that i can easily move shaft by hand Should i somewere turn it on so motor keep position by torque (current)? Best regards Lukasz
Last updated: 2024-08-04

Post by dkugler on Converting hex bytes to float ^{CODESYS Forge talk (Post)}
have a look at UNIONs. With a union you are able to write single bytes to the same adress area which belongs to a float variable at the same time. I like to do a lot of convertions belonging to interfaces and fieldbus in this way, f.eg. word / byte swapping etc.
Last updated: 2024-08-06

Post by kevinrn on Signing Packages without exposing the password of the certificate ^{CODESYS Forge talk (Post)}
Indeed, I'm also seeking a solution for this issue. The main challenge we face is the requirement to use EV (Extended Validation) Certificates. Due to security considerations, it's not possible—nor is it ever recommended in such cases—to export the certificate with its private key.
Last updated: 2024-08-20

Post by abauza on Image Pool using in other libraries ^{CODESYS Forge talk (Post)}
Hi I have done some tests and i realised that it's an issue with the visualizator simulator because i uploaded the program to a device and tried to see on the Web browser and I see correcctlu the images of the image pool of the library. I post this for anyone that have the same problem.
Last updated: 2024-08-20

Post by maxsus on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I dont know exactly why this error happens, but I think its because you have some wrong whiles. Because when i had that problem it was because I accidently wrote while true then and it was stuck in the loop.
Last updated: 2024-08-21

Post by maxsus on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I dont know exactly why this error happens, but I think its because you have some wrong whiles. Because when i had that problem it was because I accidently wrote while true then and it was stuck in the loop.
Last updated: 2024-08-21

Post by taqamert on Codesys 3.5 Library Download Failed ^{CODESYS Forge talk (Post)}
Hello, I need a few libraries in CoDeSys 3.5. I want to download them using the "Download Missing Library" option from the Library Manager menu. However, I keep getting a "Download Failed" error. Despite trying at different times, I haven't been able to download them. What should I do?
Last updated: 2024-08-21

Post by daqe102 on HTTP CLIENT (MAX SIZE) ^{CODESYS Forge talk (Post)}
Hi everybody I'm Paul and I need your knowledge, I am trying to send a huge Json (about 60,000 characters) through http client FB from codesys, however I saw that Maximum size of the http request in btyes are 16000, So, is there any way to resolve this situation? is it posible or there's a another opction to do it?
Last updated: 2024-08-21

Post by tomast on Communication between PLC and HMI- sending DUT data ^{CODESYS Forge talk (Post)}
Hi everyone, I am working with project where i have DUT wihth struct. I would like to fill this data trough a form on HMI. I use NVL to communicate and i would like to know how is it possible to do this? Thanks for all your advice in advance.
Last updated: 2024-08-23

Post by tomast on Communication between PLC and HMI- sending DUT data ^{CODESYS Forge talk (Post)}
Hi everyone, I am working with project where i have DUT wihth struct. I would like to fill this data trough a form on HMI. I use NVL to communicate and i would like to know how is it possible to do this? Thanks for all your advice in advance.
Last updated: 2024-08-23

Post by tomast on Communication between PLC and HMI- sending DUT data ^{CODESYS Forge talk (Post)}
Hi everyone, I am working with project where i have DUT wihth struct. I would like to fill this data trough a form on HMI. I use NVL to communicate and i would like to know how is it possible to do this? Thanks for all your advice in advance.
Last updated: 2024-08-23

Sort by relevance or date