Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hi, I am facing the same issues. I've tried it with codesyscontrol version 4.10.0.0 (codemeter version 7.60.5625.503) and with version 4.11.0.0 (codemeter version 8.0.5967.500). @eschwellinger, can you send me also a preliminary version of it, please? Thanks in advance
Last updated: 2024-04-09

Post by rmaas on RevPi CONNECT+, CODESYS, EtherCAT master "Filedbus lost synchronicity" ^{CODESYS Forge talk (Post)}
Hi Rossano, Did you ever find a solution to this issue? It seems i am facing the same issue but i do not use OPCUA... Best Regards, Rinie Maas
Last updated: 2024-04-11

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
Hi francoinf, I've the similar problem and similar configuration. I did with an Arduino Board loaded by a ModbusRTUServer application on it. What I've notice is the slowly acquisition when release the digital signal (e.g. pin2) when it gets off. Anyone have suggestion?! Thanks
Last updated: 2024-04-13

Post by enricoghisla on Functional block ^{CODESYS Forge talk (Post)}
Good morning, i have a problem with an FB, i create VAR inside the block but outside i can't reach them, i can reach only IN/OUT/IN-OUT VAR, do you know which could be the problem? Regard
Last updated: 2024-04-16

Post by fasica on CODESYS Edge Gateway for Linux on embedded distribution ^{CODESYS Forge talk (Post)}
It's possible find or build a CODESYS Edge Gateway for Linux on embedded distribution like Yocto or other version? Thanks, Andrea
Last updated: 2024-04-16

Post by installwhat on raspistepper error after install ^{CODESYS Forge talk (Post)}
to fix this I used a sp17 codesys and changed the project setting softmotion version to 4.6.2.0. I'm not sure if I should have had such difficulties but it works now.
Last updated: 2024-04-21

Post by installwhat on raspistepper error after install ^{CODESYS Forge talk (Post)}
to fix this I used a sp17 codesys and changed the project setting softmotion version to 4.6.2.0. I'm not sure if I should have had such difficulties but it works now.
Last updated: 2024-04-21

Post by xabier on Remove white spaces in file .txt ^{CODESYS Forge talk (Post)}
Hi, I want write a array with line break in file.txt (I attacehd the screen array) and when i check the file appear with white spaces (I attached file .txt ) Somepeople know how remove this white spaces?? Thanks you Regars XABI
Last updated: 2024-04-22

Post by damian177 on Raspbery Pi and Calendar ^{CODESYS Forge talk (Post)}
Hi, In my visualisation I have a "Calendar" control. I would like save day and month which will be clicket by operator on this control . forexample save in string array. How do this ?
Last updated: 2024-04-23

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
By browser is not working. Tim suggestet to use Codesys and stick in the laptop. Thats working. But now with a stick with licence but no running motion.
Last updated: 2024-04-25

Post by damian177 on RevPi piBridgeRight not found in project. ^{CODESYS Forge talk (Post)}
Hi, Like in tpoic I hahe a problem with running DIO on RevPi Core SE working with Codesys. Look in attachments. Any idea how solve the problem ?
Last updated: 2024-04-27

Post by dhumphries on CFC Toggle Function ^{CODESYS Forge talk (Post)}
I'm not sure I understand what you're asking, but I don't believe a function block with this behavior exists in the default libraries. I think the best solution would be using multiple and/or blocks or make your own function block.
Last updated: 2024-04-28

Post by yannick on Raspberry PI 5 not working ^{CODESYS Forge talk (Post)}
Thanks for your quick help. It's working until I do a reboot of the raspberry PI. After that it goes back to 2024-04-20. How's that possible?
Last updated: 2024-04-29

Post by gseidel on CNC / G01 Speed is very slow (or go-stop motion) in Continuous short segment . ^{CODESYS Forge talk (Post)}
Hi k2saki, 1.SMC_ReadNCFile2 2.SMC_Interpreter 3.SMC_SmoothMerge 4.SMC_SmoothPath 5.SMC_CheckVelocities I attached a simple example project. Best regards, Georg
Last updated: 2024-04-30

Post by hyet on IoDrvModbusTCP_Diag not defined when using MODBUS ^{CODESYS Forge talk (Post)}
Currently seeing the same issue here, with a project moved from 3.5.19. Diving into it too to see if i can find the cause
Last updated: 2024-05-01

Post by eschwellinger on OPC Da Server Code Meter Issues after Enabling License ^{CODESYS Forge talk (Post)}
it is mandatory to activate the OPC DA license into the 32-xxxxxx legacy container (not UFC) you need a remove ticket -> contact CODESYS store - my question to move the license
Last updated: 2024-05-03

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
It is either my installation is bad, or there is a bug. I re-created the project in 3.5 SP19 and there are no errors or warnings. Compiles with no errors or warnings. The original was done in 3.5 SP20. Thoughts?
Last updated: 2024-05-03

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by dalfaro21 on Softmotion not working with simulation mode ^{CODESYS Forge talk (Post)}
I have a KEB combivis studio software running codesys and I want to make some moves but softmotion is not working on my laptop I hope you can help me!
Last updated: 2024-05-12

Post by hanoues on Error 550 delete opertion failed ^{CODESYS Forge talk (Post)}
hello, Can anyone help me with my FTP problem on Windows 10? When I try to remove a folder, I can't, and it shows the error message 550.
Last updated: 2024-05-21

Post by rafaelbrito on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I'm having the same problem. I'm trying to license Codesys running in a Linux container, which I downloaded from the following link (https://hub.docker.com/r/hilschernetiotedge/codesys_control_sl_linux). The same error that you mentioned appears. Is there any solution?
Last updated: 2024-05-22

Post by donm on Regarding trend storage access error ^{CODESYS Forge talk (Post)}
i have created a project which contain 30 trend and suddenly trend recording is not working. its showing an error 30437."Determination of root pages for recording did not work for 'screen', error:30437" how to solve this issue?
Last updated: 2024-05-27

Post by donm on trend storage access error ^{CODESYS Forge talk (Post)}
i have created a project which contain 30 trend and suddenly trend recording is not working. its showing an error 30437."Determination of root pages for recording did not work for 'screen', error:30437" how to solve this issue?
Last updated: 2024-05-27

Sort by relevance or date