Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I've added some additional log output. Maybe this helps in figuring out the root cause. I've turned logging and verbose mode on for the CodeMeterLin application and I get the error, that some entry is not found.
Last updated: 2024-04-11

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
Hi francoinf, I've the similar problem and similar configuration. I did with an Arduino Board loaded by a ModbusRTUServer application on it. What I've notice is the slowly acquisition when release the digital signal (e.g. pin2) when it gets off. Anyone have suggestion?! Thanks
Last updated: 2024-04-13

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
[Update]. My issue's solved, I applied the resistors in Pull-down configuration on each digital input. In thus configuration never happened "floating or delaying" acquisition on SoftPLC/Arduino Board.
Last updated: 2024-04-15

Post by eschwellinger on Can't use new licensing with Raspberry Pi ^{CODESYS Forge talk (Post)}
please delete the contents of the following directory - /var/opt/codesys/.cmact_license/ then start a new SPS and then the activation should work (then you have a new empty UFC SoftContainer)
Last updated: 2024-04-22

Post by valenting on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
Hi, I can't compile my code with SP20, but when I use the "read current metrics from device" with SP20 I get the following, with "not yet supported" for the visualization part Is it supposed to be like this ?
Last updated: 2024-04-24

Post by yannick on Raspberry PI 5 not working ^{CODESYS Forge talk (Post)}
Thanks for your quick help. It's working until I do a reboot of the raspberry PI. After that it goes back to 2024-04-20. How's that possible?
Last updated: 2024-04-29

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by eschwellinger on Ethercat bus on Beckhoff CX with Codesys for Linux ^{CODESYS Forge talk (Post)}
yes I think you need to build the kernel drivers for the CCAT driver for the backplane ETC networkcard https://github.com/Beckhoff/CCAT/
Last updated: 2024-05-13

Post by siscu on Raspberry Pi - Creating own I2C library and use it without device description. ^{CODESYS Forge talk (Post)}
Do you think there'd be a way to turn this into a library? How would I2C_master be passed down to POU FBs?
Last updated: 2024-05-15

Post by rafaelbrito on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I'm having the same problem. I'm trying to license Codesys running in a Linux container, which I downloaded from the following link (https://hub.docker.com/r/hilschernetiotedge/codesys_control_sl_linux). The same error that you mentioned appears. Is there any solution?
Last updated: 2024-05-22

Post by totorovic on IO-LINK Package - new license model ^{CODESYS Forge talk (Post)}
Thank you for your answer. Finally I don't confirm that it used to work before. It seems that the IO-link Package is needed is you want to configure the network, but you don't need it if you use generic IO-link devices.
Last updated: 2024-06-06

Post by eschwellinger on Licensing info not available (WAGO PFC200 + Codesys V3) ^{CODESYS Forge talk (Post)}
Seems that the Wago Target does not support the licensing. Either use PFC200 SL from CODESYS Store or ask the Wago support for help.
Last updated: 2024-06-10

Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
This is what I see in codesys window. And here is with the netstat command on the pi
Last updated: 2024-06-23

Post by eschwellinger on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
your device in the device tree is Pi 64 online you have Pi MC (32bit) - update device in the device tree to Pi MC then it will work.
Last updated: 2024-06-23

Post by viktorr on ShareMemory library documentation ^{CODESYS Forge talk (Post)}
Hello, I was wondering if there was further documentation on the SharedMemory library in CodeSys outside of the code example provided, or maybe a way to access the source code of the shared memory implementation. Thank you in advance for any advice. - Viktor
Last updated: 2024-07-03

Post by naks on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hi everyone, I was able to change the IP address of my Controller (wago 750-8212), but when i restart my Controller then the IP address resets to the original, are there any other settings i need to implement?
Last updated: 2024-07-08

Post by mucleus on What is the solution for "Application stopped on recovery switch request"? ^{CODESYS Forge talk (Post)}
Component ID 10 is my own log message by LogAdd Function. I want to know in what cases the application stops.
Last updated: 2024-07-09

Post by installwhat on What is the solution for "Application stopped on recovery switch request"? ^{CODESYS Forge talk (Post)}
Well still similar questions remain. I don't know of "CmpRecoverySwitch" and the only thing google has to offer is your xml file. I think you'd need to provide a lot more info before anyone makes much effort here.
Last updated: 2024-07-09

Post by richard-wang on Raspberry Pi 4 B HW 1.5 Codesys control 4.10.0 stopps after a few seconds ^{CODESYS Forge talk (Post)}
Hi Preimesbergert I have the same problem and same result as yours, I am wondering if you find any root cause? I would be much appreciated if you can share any finding.
Last updated: 2024-07-29

Post by pwedel84 on Wago PLC Crashing and Cant Reconnect ^{CODESYS Forge talk (Post)}
Hi happychappy, Did you ever get figured out what your problem was or how to solve it? I am running into the same issues with the 750-880...
Last updated: 2024-07-30

Post by shubadubalu on Raspberry PI 5 not working ^{CODESYS Forge talk (Post)}
After restart the pi5 will make automatic updates. To disable: sudo systemctl mask rpi-eeprom-update To re-enable: sudo systemctl unmask rpi-eeprom-update
Last updated: 2024-08-10

Post by installwhat on No connection to target: An existing connection was forcibly closed by the remote host ^{CODESYS Forge talk (Post)}
Worked for me too. Now I have to find out why I didn't need to do this on very similar systems and what the security issue is
Last updated: 2024-08-11

Post by eschwellinger on Codesys Virtual Control - startup problem ^{CODESYS Forge talk (Post)}
I think you have already up and running an Edge on the host ( not in the container) please uninstall that edge, then it should work.
Last updated: 2024-08-13

Sort by relevance or date