Post by fontrap on cmDongle Raspberry Pi issue ^{CODESYS Forge talk (Post)}
Hello mates, I'm working with CODESYS V3.5 SP20 on a Raspberry Pi and I use "Raspberry Pi MC SL" as device on the project. I've installed the Control Standard L (multicore) license on a Wibu System usb-Dongle (cmStick/4.50) that already had another license from another vendor. I follow the online activation procedure from CODESYS documentation. Raspberry Pi has already CodeMeter installed for the other license. When I plugin the dongle on Raspberry and start the Runtime from Raspberry Pi Update in CODESYS I receive the message that I'm on Demo mode because the license is missing. I double checked that the license is activated in the dongle, through the WebAdmin of CodeMeter and the second license runs properly without any issue. I have already try to change the dongle from HID to MSD device and backward but the the Runtime cannot recognize the Dongle. I have also try to stop and start the Runtime through CODESYS without success. Is there anything else I can do to fix this issue?
Last updated: 2024-04-22

Post by mxj262 on FB having single input but initialized with Array ^{CODESYS Forge talk (Post)}
I am adding elements of an ARRAY using pointer to access each element inside a FOR loop and the FOR loop does not stop! What is the right way to use pointers in such case?? I have another loop that is not using pointer and it stops but the loop using pointer keep on adding. METHOD FB_Init: BOOL VAR_INPUT bInitRetains: BOOL; // TRUE: the retain variables are initialized (reset warm / reset cold) bInCopyCode: BOOL; // TRUE: the instance will be copied to the copy code afterward (online change) END_VAR VAR_IN_OUT // basically REFERENCE TO window_buffer: ARRAY [*] OF INT; // array of any size END_VAR THIS^.windowPtr := ADR(window_buffer[0]); THIS^.windowSize := UPPER_BOUND(window_buffer, 1) - LOWER_BOUND(window_buffer, 1) + 1; FUNCTION_BLOCK FB500 VAR_INPUT END_VAR VAR_OUTPUT END_VAR VAR windowPtr: POINTER TO INT; windowSize: DINT; currentIndex: UINT; element1:INT; element2:INT; i:INT; j:INT; sum:DINT:=0; END_VAR element1:=windowPtr[0]; // read the first element of the Array dynamic memorry element2:=windowPtr[1]; FOR i:=0 TO (TO_INT(windowSize-1)) BY 1 DO // this loop does not stop Sum:=sum + windowPtr[i]; END_FOR FOR j:=0 TO 5 BY 1 DO // this loop stops j:=j+1; END_FOR https://ibb.co/k3DhkZT
Last updated: 2024-05-06

Post by eschwellinger on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
this is a security issue not to read/write in the plc allowed path I would recommend to update and change the path in the application were the files are😏
Last updated: 2023-08-30

Post by totorovic on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
Thank you for the return. The path targets to a CFast card. User has R/W access to it. We will try to change it.
Last updated: 2023-08-31

Post by marekxc on Error C0521 - unknow compiler ^{CODESYS Forge talk (Post)}
Select in tree "DEVICE", right-click and select "Update Device" Select "Library manager" and Change the version of the Library (down manualy). Samoetimes "Try reload Library". If you open a project version 3.5.19 in version 3.5.16, there are difficulties.
Last updated: 2023-09-02

Post by awatson on How to change keyboard layout on the virtual keyboard? ^{CODESYS Forge talk (Post)}
I got it all working nicely based on the demo templates - edit my own numpad and screen keyboards - plus go the keyboard working on the login dialog (didn't work before!)
Last updated: 2023-11-17

Post by reinier-geers on Time zone ^{CODESYS Forge talk (Post)}
I use a controller with Linux. I try to change timezone. but no result. The command of codesys i dont understand ?? And Linux Commands dont work. It stays at +0 . I want Amsterdam
Last updated: 2023-12-29

Post by giackanto on Eoe issues with Windows and Linux ^{CODESYS Forge talk (Post)}
I tried to change the name of the tap device to 'tap0,' but nothing changed. I don't think this is the problem.
Last updated: 2024-01-10

Post by thomasrohnerch on Color Change for Symbols not working ^{CODESYS Forge talk (Post)}
It seems I misunderstood "Toggle color". It's only applicable for the Symbol "FRAME". This part is working fine. See also attached archive.
Last updated: 2024-02-09

Post by ragarcia on Error while using UpdateConfiguredIPSettings to change IP address ^{CODESYS Forge talk (Post)}
I did check I cannot see any error log. It is when executing the Reconfigure function that I get an error as return from that function.
Last updated: 2024-02-19

Post by reinier-geers on Compile error ^{CODESYS Forge talk (Post)}
Ive got a project version 16p3 Running on Epis( 32) . Codesys cant see License stick on Epis and no one can tell me why. So Got me a Crist(64). Change version to version 18.4 But then i get dialog libry problems. Anyone knows why ?
Last updated: 2024-02-22

Post by niallel on How to change bHiresMode ^{CODESYS Forge talk (Post)}
Thank you so much for the reply. The motor is a rotary connected to a linear actuator. So would I set it up as in the attachment screenshot?
Last updated: 2024-03-12

Post by fless on How to change bHiresMode ^{CODESYS Forge talk (Post)}
Hi, you should see 2 input fields in the scaling tab of your linear axis: increments and units in application just set increments to 10 and units in application to 366
Last updated: 2024-03-12

Post by doli on Codesys table border ^{CODESYS Forge talk (Post)}
Hello. I have a simple table in codesys. How can I remove the right border from all the cells and change just the color of border from table (not header)? Thank you!
Last updated: 2024-03-19

Post by danieldiaz on Problem with FB execution ^{CODESYS Forge talk (Post)}
Hello everyone, I've been working on a system which needs an error function, with this purpose I've created a FB programmed in LD, after debugging I run the simulation. It seems that the variable linked to a coil doesn't change the value when the contacts are associated to input variables. When I use internal variables the logic works properly. I don't know if the problem is related to the variables definition or with the logic program. As you can see in the image, I1 and I2 are variables declared on the FB, the rest are input variables. If I force the eStop and Reset signals to TRUE the coil value should change, but it doesn't. However in the second network if I1 is TRUE the coil change to TRUE as it has to be. To sum up, my doubt is why that coil doesn't change its value? I would like someone to shed a light on this. Thanks!
Last updated: 2024-04-02

Post by mosayeb on Power off ^{CODESYS Forge talk (Post)}
Hello. It is interesting that almost everyone has faced this problem. Run the program as shown in the attached photo. Give True to the Enable input and change the status of the drive to on and off with Servo-On
Last updated: 2024-04-08

Post by mmpl on CAA Library Function ^{CODESYS Forge talk (Post)}
I want to change date and time format. I am using CAA storage library function. I am not receiving any value in to output.
Last updated: 2024-04-16

Post by guilhermeleao on How to communicate 2 pcs that are using CODESYS ^{CODESYS Forge talk (Post)}
I need to connect 2 computers on the same network that are running codesys, so that they can receive and change variable values from each other. This connection must preferably be made using Modbus.
Last updated: 2024-05-06

Post by stiller on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
Hello! Is there a way to change ApplicationUri and ProductUri of the OPC_UA server? I can not find any information about it. Does someone have a clue? Thank you in advance!
Last updated: 2024-05-10

Post by kevinm on Data source and safety PLC ^{CODESYS Forge talk (Post)}
I am having the same trouble. However, if I change the Login Configuration settings to 'Type: Login using the credentials determined at runtime' then the Connection information continues as 'Connection state: Connecting' and 'Error information: OK'. There is no User Management on the source PLC.
Last updated: 2024-05-16

Post by culius on Official MQTT-Client: MAX_RECEIVE_BUFFER_SIZE_EXCEEDED ^{CODESYS Forge talk (Post)}
Hey Guys, could you give a explaination of how to change the g_udiMaxPacketSize from 6000 to 100000 and g_udiMaxPayloadSize from 4096 to 80000 ? When I go to the library the parameter is not editable. I would really appreciate it :) Kind Regards
Last updated: 2024-06-07

Post by hwopereis on How to use Application Trigger in Modbus TCP Server ^{CODESYS Forge talk (Post)}
I'm now circumventing the problem by creating a separate TCP client for all Write actions. Upon registering a changed variable, I enable this client, until the change is processed.
Last updated: 2024-07-01

Post by naks on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hi everyone, I was able to change the IP address of my Controller (wago 750-8212), but when i restart my Controller then the IP address resets to the original, are there any other settings i need to implement?
Last updated: 2024-07-08

Post by viktorr on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
Hi i know this is a bit of a long shot but did you ever find a solution to this? Running into similar issues...
Last updated: 2024-07-24

Post by lyngaansns on .project.~u save frequency ^{CODESYS Forge talk (Post)}
It would be such a simple fix to first check if the file is missing or changed before writing to it, onedrive only has a problem because codesys writes to the file every second no matter the change.
Last updated: 2024-09-11

Sort by relevance or date