Post by fontrap on cmDongle Raspberry Pi issue ^{CODESYS Forge talk (Post)}
Good morning @eschwellinger, After some research I found out that the problem is the preinstalled CodeMeter on Raspberry Pi. As I mentioned the CodeMeter was installed on the Raspberry because I use a license from other vendor that needs the CodeMeter to be installed. The problem is that when I uninstall the CodeMeter from Raspberry I am able to detect the dongle from CODESYS and everything works as it should be but now the other product can not detect its own license. When I reinstall the CodeMeter I am back to the initial problem. Is there a way to overcome this conflict through CODESYS?
Last updated: 2024-04-24

Post by eschwellinger on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
check in the CODESYS installer which version is used update to latest
Last updated: 2024-04-24

Post by eschwellinger on Can't connect to Device Raspberry Pi 4 from CODESYS IDE V3.5 SP19 ^{CODESYS Forge talk (Post)}
with latest version?
Last updated: 2024-04-26

Post by eschwellinger on Login problem with FileTransfer on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
maybe to add [CmpWebServerHandlerV3] CallVisuServicesDirectly=0 would help
Last updated: 2024-04-28

Post by valenting on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
Update : I updated my project's compiler version to the latest and it finally works
Last updated: 2024-04-29

Post by eschwellinger on IoDrvModbusTCP_Diag not defined when using MODBUS ^{CODESYS Forge talk (Post)}
error need to be solved by CODESYS. hopefully next release
Last updated: 2024-05-01

Post by alex2 on Codesys SVN ^{CODESYS Forge talk (Post)}
Are you sure about that? The 1.1.0.0 seems to be for V3.5.17.0 or higher. For the SP18, couldnt i take the 1.2.1.0?
Last updated: 2024-05-02

Post by aris-k on Pack TWO INT variable to one DINT variable ^{CODESYS Forge talk (Post)}
You can try this setup: DINTVar := SHL(INT_TO_DINT (Low_Word_INT_Var),16) + INT_TO_DINT(High_Word_INT_Var);
Last updated: 2024-05-07

Post by jonasz on Discontinuity of A/B/C axis movement. ^{CODESYS Forge talk (Post)}
Hi, My problem was related to the behavior of the modulo axis, but maybe you will find something useful from what I write. The solution lies in path processing. Codesys offers a G-code analysis tool. Insert a CNC object into the project. The CNC settings object will be added automatically. By inserting appropriate processing modules into the CNC settings object and parameterizing them, you can test the behavior of the axis. When the effect is satisfactory, remember to add the module from CNC settings in the correct order in the processing path. Each CNC machine case is different. You need to spend some time to get your design tailored like an Armani suit. Good luck.
Last updated: 2024-05-09

Post by ioannis-a on How to Use Personal Access Tokens from GitHub with Codesys Git ^{CODESYS Forge talk (Post)}
I have the same issue. Is there any solution?
Last updated: 2024-05-12

Post by totorovic on How to display the application name on a visualization (V3.5.16) ^{CODESYS Forge talk (Post)}
You could use the function AppGetApplicationInfo from CmpApp library. https://content.helpme-codesys.com/en/libs/CmpApp/Current/AppGetApplicationInfo.html
Last updated: 2024-05-14

Post by wiresplus on How to display the application name on a visualization (V3.5.16) ^{CODESYS Forge talk (Post)}
Intetrested... I added the CmpApp library, but cannot find the AppGetApplicationInfo you mention.
Last updated: 2024-05-15

Post by totorovic on How to display the application name on a visualization (V3.5.16) ^{CODESYS Forge talk (Post)}
https://forge.codesys.com/forge/talk/Engineering/thread/1203efe4d8/
Last updated: 2024-05-16

Post by eschwellinger on Recipe Manager - Not Creating Recipe Files ^{CODESYS Forge talk (Post)}
due security reasons this folder need to be in PlcLogic area.
Last updated: 2024-05-17

Post by wbj0t on connect IDE to plc that uses modem ppp ^{CODESYS Forge talk (Post)}
Hello everyone! I have an PLC device that uses modem ppp connection to the internet with white IP. Device PPP connection with modem operator established, so I can connect to this device via SSH also within Codesys IDE (check version, info, etc...) BUT, I cant establish connection to this device in the device gateway options for application upload and debugging. How can I do this? Im trying set my device remote IP and port 11740, but, as I understand, it is wrong decision, because the next logic in this connection: local W10 service (Codesys Gateway) listen on 1217, then (some how) this service scanning local networks for seeking any local IP which listening on port 11740, and then connects and writes there. OR IM WRONG?:) W10 tool 'Test-NetConnection' with parameters 'ip -Port 11740' succeeded with True. Need some help, please :)
Last updated: 2024-05-21

Post by culius on JSON ^{CODESYS Forge talk (Post)}
Sorry that I haven't replyed to youranwser in so long time. Thank you for explaining the issue. Now everything works without a problem!
Last updated: 2024-05-21

Post by alexgooi on FB_INIT in library ^{CODESYS Forge talk (Post)}
Dear Forum, I currently have a challenge. I have a library with some communication classes. These communication classes need to be linked to an interface like this: Devices_and_controllers.Comm_Frame.Modbus_GVL_Link.KNX_TCP[Interface_Index] := THIS^; This is executed via a FB_Init() method. When I try to do this in a program this works fine. But when I declare the FB_Init() in the library the FB_Init() method is being called but the link is not made (interface still has the value 0000000000). The Objects and interfaces are defined in the library (GVL), so I’m assuming the data should be there. When I call the FB_Init method explicitly in the program it also works fine. Whys is this not working when it is all defined in the library? And is it even possible to create a structure like this in Codesys? Kind regards Alex
Last updated: 2024-05-22

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
we recommend to do it with the official virtual plc version..will send a version.
Last updated: 2024-05-23

Post by fpawlak on KNX SL on stock PFC200 firmware ^{CODESYS Forge talk (Post)}
Hi All. Is it possible to use CODESYS KNX SL on stock Wago firmware (Codesys version, not e!Cockpit). I have Wago 750-8212 with firmware 0.4.04.03(26). When I tried to run 'KNX SL' or even 'Device Reader', I have got [FATAL ERROR] Unresolved reference: 'CODEMGETCONTENTBYFIRMCODE3' [FATAL ERROR] Unresolved reference: 'CODEMGETCONTENTBYFIRMCODE2' [FATAL ERROR] Unresolved reference: 'CODEMGETCONTENTBYFIRMCODE2' What probbalby means that there is no running CodeMeter component on PLC. I have checked /etc/codesys3.d/CODESYSControl.cfg [CmpWebServer] WebServerPortNr=58080 [CmpSecureChannel] CertificateHash=86ccf31839a098ee32067179e26600f1bd6b36f8 [CmpUserMgr] AsymmetricAuthKey=a9d38381e75bbf1bbfc8749e97f536f68238a2ce So the question is if I can somehow add Codemeter to stock firmware? Or should I switched to CODDESYS Control for PFC200 SL or application-base runtime licence?
Last updated: 2024-05-23

Post by alexgooi on FB_INIT in library ^{CODESYS Forge talk (Post)}
Hi Paro, I have tried this and it seemed to have solved the problem, thank you very much!
Last updated: 2024-05-23

Post by eschwellinger on New License not working. ^{CODESYS Forge talk (Post)}
please use 'my question' in the CODESYS Store to ask for support
Last updated: 2024-05-24

Post by ndzied2 on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
Ignore, was duplicate post. Can't find a way to delete it.
Last updated: 2024-05-24

Post by ppix on MQTT PLC Chat: ^{CODESYS Forge talk (Post)}
Did you ever find a solution to this? I am having the same issue but using TLS connection.
Last updated: 2024-05-26

Post by timvh on Display minutes as hours & minutes ^{CODESYS Forge talk (Post)}
You could use the Modulo function to get the minute part from the total minutes: Minutes := TotalMinutes MOD 60;
Last updated: 2024-05-27

Post by timvh on Sensor not set ^{CODESYS Forge talk (Post)}
Your function block instance is not called, so the code is not executed to set the light on when the button is pressed.
Last updated: 2024-05-27

Sort by relevance or date