Post by nz-dave on ethercat softmotion axis error ^{CODESYS Forge talk (Post)}
Hi all I'm having a little trouble get my axis to work. i can turn them off and on. i can run each servo manually inputting directly to the mapping address. as soon as i try to use any FB's like jog etc my servos wont move and error out. so far I've had error "SMC_ERROR.SMC_DI-POSITIONLAGERROR" and another one about not calling a fb. cheers. in the attachment I have just jogged X_Axis with the MC_JOG FB
Last updated: 2025-03-10

Post by janp on IFM Controller Connection Issue ^{CODESYS Forge talk (Post)}
Hi everyone, I’m using an IFM ecomatBasic CR413S controller and having trouble connecting it to CODESYS 3.5. I have CODESYS SP18 installed, as recommended in the manual, and I’ve tried different patches. I’ve also installed all the packages provided on the IFM website for this controller. I can successfully connect to the ecomatBasic template, but I’m unable to connect when using the CR413S-specific template that includes all the inputs and outputs. Has anyone encountered this issue or knows a solution? Best regards, Jan
Last updated: 2025-05-22

Post by janp on IFM Controller Connection Issue ^{CODESYS Forge talk (Post)}
Hi everyone, I’m using an IFM ecomatBasic CR413S controller and having trouble connecting it to CODESYS 3.5. I have CODESYS SP18 installed, as recommended in the manual, and I’ve tried different patches. I’ve also installed all the packages provided on the IFM website for this controller. I can successfully connect to the ecomatBasic template, but I’m unable to connect when using the CR413S-specific template that includes all the inputs and outputs. Has anyone encountered this issue or knows a solution? Best regards, Jan
Last updated: 2025-05-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by hsmw-wolf on How to fix Codesys Simulation Exception ? ^{CODESYS Forge talk (Post)}
Did anybody have a solution for this problem? I have the same issue and it occured as i wanted to continue work after the weekend. On Friday the simulation was working fine and on Monday thise error appears. There should be a more specific fault description to be honest. As I am writing I try to repair the installation and hope, that this will work. Still I am frustrated, because I don't know where to look for eliminating this fault. I am using CODESYS 3.5 SP19 Patch 5.
Last updated: 2024-01-29

Post by john-martin on Control SL Extension Package doubts ^{CODESYS Forge talk (Post)}
Hello everybody, I'm trying to understand the SL control extension package, more specifically, the external IODriver example, because C integration is very easy and I just made my first C component successfully. Ther External IODriver has no documentation and it's not clear how to proceed. Furthermore, there is no information on how to modify the device descriptor, which is necessary to import the device into the Codesys repository. Any advice ? Thank you in advance and best regards.
Last updated: 2024-02-28

Post by riccardo on Web Browser special tools errors ^{CODESYS Forge talk (Post)}
Nano goodmorning and thanks for the reaply, the links I have to manage are links as the following: https://192.168.1.101/u-os-app-codesys/application/visualization/webvisu.htm I saw that with Wikipedia or other web sites the tool works but not the link above. "google and some other providers, prevent from using as iframe and similar injections." The goal I'm pursuing is to display remote graphical user interfaces from a local graphical user interface over a local network. thanks in advance, Riccardo
Last updated: 2024-03-06

Post by androidzz on Json Builder problem? ^{CODESYS Forge talk (Post)}
Dear reader, I am using the codesys JSON utilities SL, 1.9.0.0 library. And then specifically the FB JSONBuilder. I need to create a main object with at least 2 objects in it. The first object is no problem, but I cannot insert the second object into the main object. See attached my code and the result I get. I am assuming that I am doing something wrong with the parent index but have tried a lot and can't get it done. Kind regards, Rob
Last updated: 2024-03-11

Post by rossanoparis on RevPi CONNECT+, CODESYS, EtherCAT master "Filedbus lost synchronicity" ^{CODESYS Forge talk (Post)}
Hello @rmaas I assume, you've already verified and tuned everything regarding the EtherCAT network. In my case the problem was due to a wrong core assignement. I suggest to not use the core #0 for your EtherCAT task. The OS realtime patch, which is present on RevPi OS, uses the core #0 for its porpouses and it mustn't be used by any other task which requires realtime and deterministic features. regards Rossano
Last updated: 2024-04-11

Post by esave on Stepper Drive with Ethercat ^{CODESYS Forge talk (Post)}
I bought and installed SoftMotion Light now. When I try to add a SoftMotion Light Axis to my stepper drive and I go online it shows: "The license is missing or invalid". See picture What am I doing wrong? This is the right way right? First add your EtherCat XML-File from your stepper driver and then add the SoftMotion Light axis right? Thanks for your help esave
Last updated: 2024-04-25

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
I just try to help. Anyway it is a big difference if a Store SL runtime or an oem plc and licence is used. These licenses need to be activated on plc side - so you have dependencies to the version (CODESYS and Runtime Version) Did you ever ask Epis out for this situation? They should know which license fit to their device. Even they should know if the device is capable for Softmotion and see the requiremnts in the CODESYS store: Runtime 4.9.0.0 - how should this work with Epis 3.5.16.x? Anyway refund is not a problem.
Last updated: 2024-04-26

Post by yannick on Raspberry PI 5 not working ^{CODESYS Forge talk (Post)}
Hello I'm using Codesys V3.5 SP19 Patch 6 and a Raspberry PI 5 4GB Bookworm 32bit with the Runtime 4.11.0.0 SL. I can install the runtime and download the software completly but after a few seconds the connection disconnects with the message no connection to device. Please scan network again. And the object reference was not set to an object instance. See screenshot. Can somebody help me with that? Thanks
Last updated: 2024-04-28

Post by yofi on Raspberry PI change tag only responds after stopping PLC ^{CODESYS Forge talk (Post)}
Using V19 Patch 7 and 4.11.0.0 for Pi 4 Model B, My problem is whenever I change a tag e.g bool from true to false it will change in software but the pin will only go high to low after pressing stop PLC in codesys and same if i want to bring it back to high, have to login start plc change it and stop plc in order to change. any insight ? thanks
Last updated: 2024-05-25

Post by plunje on Sensor not set ^{CODESYS Forge talk (Post)}
A got a larger project but this very small example makes it clear. I have a button, and after it's clicked a lamp should flip on and stays on, and when the mouse-button is released it should stay on. When I try that in the PLC_PRG it works, but when I change it to a function block (seet attched demo proj) it isn't. I'm fairly new to PLC programming but are very experienced C# engineer, but this goes above my head...
Last updated: 2024-05-26

Post by mozed on Bug Device login ^{CODESYS Forge talk (Post)}
Good morning, The problem I encounter is very disturbing, when I try to connect to my project, it asks me to put in my username and password, which I do. However, I cannot connect and it restarts. the window to rewrite my identifiers. However it is the correct identifier and password I do not understand why. When I try to put false identifiers there strangely it tells me that these are not valid identifiers. There is something what can I do? Sincerely
Last updated: 2024-06-11

Post by imdatatas on SMC_ERROR.SMC_AXIS_NOT_READY_FOR_MOTION when using Drive Virtual ^{CODESYS Forge talk (Post)}
@ducng, Another possible situation could be that normally there are 3 inputs for MC_Power. In your above images, I can't see the "bDriveStart" input activated. As Mr. @gseidel mentioned, you need to make sure MC_Power.Status output should be TRUE. Issuing any movement command without activating the axis would naturally result in an error. For MC_Power; You can set the Enable and bDriveStart inputs to TRUE and try turning the axis activation on and off using only the bRegulatorOn input. Regards, Imdat
Last updated: 2025-11-28

Post by gatewail0 on Digital Clock ^{CODESYS Forge talk (Post)}
You can definitely pull the actual system time into CODESYS without too much trouble. Take a look at the SysTimeRtc or SysTime library—both let you read the current date and time from the Raspberry Pi. You can call SysTimeRtcGet() or SysTimeGetTime() in your PLC code and then format the hours, minutes, and seconds into variables that feed your 7-segment visualization. Once you’ve mapped those values, your Visu display will update automatically each cycle. It’s a pretty common approach for clocks in CODESYS, so you should be able to get it working quickly. golf hit
Last updated: 2025-12-04

Post by marciohogenelst on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11

Post by marciohogenelst on stablish CAN communication through the PC's USB port ^{CODESYS Forge talk (Post)}
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11

Post by seler on Custom button with output status ^{CODESYS Forge talk (Post)}
Just to clarify. Output for lamp will have two inputs: from plc IN (wall switch) and from visu button. Until now I had separate object for visu button and separate for visu lamp. Now I want it to be one object, bulb icone which will change color on lamp status and yet by touching it will change visu button state. Tried "Switch Image" object but there is no way to assign switch var.
Last updated: 2025-11-19

Post by george32 on CSV file and string manipulation. ^{CODESYS Forge talk (Post)}
Dear folks, I think I have a rather simple question but I could not find the right answer to my question: I have made with Excel a CSV file where I would like to have some general data regarding my program variables. I have made an program what let me read the file. The string I am currently get is at follows: 'IP_Adres;192.168.45.12$R$NPort_number;2000$R$NCycle_time;43$R$NStart_Standard_IO;20$R$N' Now I want to split the string in multiple part, which I later would connect to the right variable. By Google and experimenting I have reached to the following code for the first part of the splitting proces: // Splitting the BOM of the string: Received_string := FileReadString; IF LEFT(STR:=New_string,3)= '' THEN Received_string_without_BOM :=RIGHT(STR:= Received_string,SIZE:= (LEN(STR:= Received_string))-3); END_IF //Splitting the remaining string in part for later declaration. WHILE index = 0 DO index_split_part := FIND(STR1:= Received_string_without_BOM,STR2:= '$R$N'); Part_of_String[index]:=LEFT(STR:=Received_string_without_BOM, SIZE:= index_split_part); index := index + 1; END_WHILE However in the splitting proces I could not understand what is really happening. I understand that the Find() function returns the first value the $R$N in the Received_string_without_BOM. This would mean that the index_split_part := 23 I|P| _ |A |d|r|e|s|;|1_|9 |2 |. |1 |6 |8 |. |4 |5 |. |1 |2 |$ |R |$ |N |P | 1|2| 3 |4 |5|6|7|0|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24|25|26|27| So the next part is to read the first 23 characters of the Received_string_without_BOM with the LEFT() function. I expected that the outcome the following was: 'IP_Adres;192.168.45.12$'. However the outcome is: 'IP_Adres;192.168.45.12$R'. I do not understand where the R after the $ sign comes from, because its place is 24 so it would not be added to the part_of the_string[index]. If I hard coded value 24 for the size it gives me the following return: 'IP_Adres;192.168.45.12$R$N'. I would expect everything till the R but the code adds the $N also to the string. I hope someone could explain to my what I am seeing wrong in my point of view? With kind regards, George
Last updated: 2024-09-27

Post by arundara on Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Post)}
Hello, I was trying to create a redundancy POC for our application where we read data from few modbus tcp devices. As there is a limitaion that modbus tcp device support only for single master device, we wanted to test how the variable sync happens in redundancy mode. For that i have used the redundancy sample code added a variable "b" under a condition. What i observed was while active controller is running, if passive controller is powerup, passive controller is able to sync all the data configured for redundacny. But after that the variable data which resided under a condition is not synching from active to passive controller. I have attached the image where i have highlighter the variable. Can some help me to understand how redundacny work in codesys soft plc and if there is a solution to sync variable which are under condition, please explain the same or suggestion to achieve the same. Hardware - Raspberry Pi (2 qty) Redundancy licence used - yes in both controllers. Codesys runtime - 4.9.0.0 Codesys software version - V3.5 SP19 if i have posted this question in wrong section, please do let me know in whcih section i have to post this question.
Last updated: 2023-12-01

Post by animesh on SoftPLC (CODESYS Control x86 RTE V3 x64) OPC UA binds only to 127.0.0.1 — Not binding to LAN IP ^{CODESYS Forge talk (Post)}
Hello everyone, I am facing a persistent issue with the OPC UA Server on Advantech Soft PLC with hard realtime for Win64 (V3_5_2010_3) and need help from the community. Device Information Name: Advantech Control x86 RTE V3 x64 Vendor: Advantech Co., Ltd. Categories: PLCs Version: 3.5.20.10 Description: Advantech Soft PLC with hard realtime for Win64 (V3_5_2010_3) Problem Summary The OPC UA Server works perfectly when accessed via: opc.tcp://localhost:4842 opc.tcp://<hostname>:4842</hostname> But it does NOT work when using the LAN IP: opc.tcp://192.168.0.XX:4842 In UAExpert I get: Discovery FindServers on opc.tcp://192.168.0.XX:4842 failed (BadCommunicationError) Port is LISTENING in windows Firewall.. Tried with turning off the firewall completely. System Information Windows 10 x64 Advantech CODESYS RTE Soft-PLC (hard real-time) Network IP: 192.168.0.XX Hostname: WINDOWS-XXXXX Need your Support
Last updated: 2025-11-24

Post by totorovic on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
Actually no solution. We are waiting Codesys reply. Latest version of library : licence error message Version 1.0.0.5 : INVALID_HANDLE error message
Last updated: 2023-08-21

Sort by relevance or date