Post by nltheves on Raspberry PI4 Serial Port ^{CODESYS Forge talk (Post)}
Hi Ricardo. I was having the same problem with Codesys and a Raspberry Pi 2W while using the GPIO uart. Your post helped me a lot. Thanks! But could not understand why MODBUS parity bit makes Codesys MODBUS COM driver stopping to work after first request transmission. Did you see this @eschwellinger ? Regards, Nelson
Last updated: 2024-07-18

Post by marks on Regarding trend storage access error ^{CODESYS Forge talk (Post)}
I had this problem when running the application as a Simulation. When I wrote it to the Pi all worked as expected. If this isn't the case for you, we've seen some issues with sqlite on the Pi's - so reset Origin and re-download may help in that case. Good luck, Mark
Last updated: 2024-07-24

Post by jmfernandes on OpenDir always in error ^{CODESYS Forge talk (Post)}
Hello just to give more feedback the error I get is "ERROR_UNKNOWN :represents raw value of 5110" in File.DirOpen. The xDone never gets true, and I never get the listing of files (csv files in this case). In the hDir i get the value of 0 for a DWord!?
Last updated: 2024-07-31

Post by jmfernandes on OpenDir always in error ^{CODESYS Forge talk (Post)}
Thanks for the answer Tim. I am using the codesys version 3.5 SP16, is this also affected or only after version 19? But now at leastI know that is an acess problem to the file and not something else. Unfortunately the link you posted on 2023 are now dead, but I will investigate!
Last updated: 2024-08-01

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Hello, I using codesys motion with Parker servo (without brake). In my application i use mc_moverelative. When i send new position motor moves. But when it arrives to the point it stops and does not hold the position. It means that i can easily move shaft by hand Should i somewere turn it on so motor keep position by torque (current)? Best regards Lukasz
Last updated: 2024-08-04

Post by maxsus on Visu Frame-configuration___text will not work ^{CODESYS Forge talk (Post)}
Hello I have a problem with the Frame-configuration. In the picture below you can see that I set the Editor Type to variable. If it would be text it would work, but it wasnt variable anymore. Thanks for your time. Sorry, my codesys is in German.
Last updated: 2024-08-20

Post by maxsus on Visu Frame-configuration___text will not work ^{CODESYS Forge talk (Post)}
Hello I have a problem with the Frame-configuration. In the picture below you can see that I set the Editor Type to variable. If it would be text it would work, but it wasnt variable anymore. Thanks for your time. Sorry, my codesys is in German.
Last updated: 2024-08-20

Post by fless on SMC_NCDecoder very slow to decode lines ^{CODESYS Forge talk (Post)}
Hi, I got good results with SMC_NCDecoder, SMC_CheckVelocities, etc. in a freewheeling task with lower priority (higher number). Still takes some time but I'm using many variables and loops in my g-code and more preprocessing like SMC_SmoothPath, SMC_LimitDynamics, SMC_CheckForLimits. PS: your buffer size seems a bit high for 34 lines of g-code
Last updated: 2024-08-23

Post by damian177 on OPC UA Client ^{CODESYS Forge talk (Post)}
Hi, Today I ran OPC UA Client Example in 1.1.0.0 version. I opened example visualisation and I tried connected to my OPC UA Server. In first steps looks good but connection was terminate with error OpcUa_BadLicenseLimitsExceeded. I can't test OPC UA Client witohut CODESYS OPC UA Client SL license ? Regards
Last updated: 2024-08-30

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
I made hardware reboot and it still not working. I also tried Persistence Manager which need Application Composer Single License but Codesys support said that my runtime do not compatibile with it and it will avaiable in 2025 only. So I hope I will figured out how to use this code.
Last updated: 2024-08-31

Post by joep on Creating Custom Kinematics ^{CODESYS Forge talk (Post)}
Hi John, Coincidentally I also tried creating a custom kinematics model for a parallel delta2 like the picture I added. bipod_rotary doesn't seem to do the job. Have you accomplished a working model? I'm stuck on error: "smc_cp_invalid_path_elem" while im certain my math is correct since we made it work using single axis movements. Maybe we could help each other Best regards, Joep
Last updated: 2024-09-06

Post by dengsberg on Check Connection Status of the OPC-UA Server for Data Source Manager with OPC-UA Client ^{CODESYS Forge talk (Post)}
I am using the Data Source Manager with OPC-UA Client to get data from another CodeSys application in the same Project. How can I check in the PLC_PRG structured text if the connection is ok or not?
Last updated: 2024-09-07

Post by damian177 on Codesys Control for Linux SL ^{CODESYS Forge talk (Post)}
Hi, For many years my application has been running on Raspberry Pi. Now I have ported the application to a PC running with Debian OS with Codesys Control for Linux SL. Most of things works. But some is wrong with serial ports. Firstly , I wonder why /etc/CODESYSControl.cfg in Debian is empty ?
Last updated: 2024-09-08

Post by damian177 on Problem with downloading OPC UA tags by Data Source Manager ^{CODESYS Forge talk (Post)}
Unfortunately , Data Source Manager from Codesys has any problem with OPC UA Server delivered with ifix SCADA. Someone can help me add manually any tag from UaExpert to codesys ? How should be was a structure for an example of one tag ? I try like in attachement, but question is , if it a good idea ?
Last updated: 2024-09-08

Post by eschwellinger on Gateway ^{CODESYS Forge talk (Post)}
yes, sorry this is an accident in current Gateway Version. Either use 3.5.20.0 Version. (download from CODESYS Store standalone setup - https://store.codesys.com/en/codesys-edge-gateway-for-windows.html ) or do it manually by: 1. stop Gateway: 2. Add in c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSGatewayV3\xxxxxxxx\Gateway.cfg [CmpEdgeGateway] MaintenanceMode=1 3. start Gateway again 4. add it to your CAS Instance
Last updated: 2024-09-18

Post by rh-pk on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Hello jacobwago, I believe that the limit is fixed in the editor, but not in the driver package. There seems to be no link between the driver setting and the editor. Otherwise, I don't know why the input (>10) is blocked, but the function is available. Unfortunately, I cannot offer you any other solution apart from the one mentioned above. Kind regards
Last updated: 2024-09-30

Post by egau on Hard shutdown: no code on device after power on ^{CODESYS Forge talk (Post)}
Hi, thanks for the fast response :) Yes I Have a .err file. Sorry I forgot to upload it. It is a binary file though... "Runtime goes in exception before the shutdown ?" I think it goes into exception at the same time as the power is lost...
Last updated: 2024-10-03

Post by bolopg on MODBUS TCP REGISTERS CODESYS V3.5 ^{CODESYS Forge talk (Post)}
Hi. I have a problem with MODBUS TCP MASTER. I treid to read HR in range 3027-3037 but I cannot read them. I have modbus slave chanel with offset 0x3037. I checked what I read and it looks like I am reading HR in range 1-10. What I am doing wrong.
Last updated: 2024-10-11

Post by davidf on Error trying to activate the demo Git licence ^{CODESYS Forge talk (Post)}
The CodeMeter Control Center log shows the following: 2024-10-11 21:02:13: Entry (6000437:8747) not found - Event WB0200 (ENTRY NOT FOUND), Request IP-Address local(IPV4) (SID 0xc079 / 0x00) with StationShare Mode 2024-10-11 21:02:13: API Error 200 (ENTRY NOT FOUND) occurred!
Last updated: 2024-10-11

Post by dekelec on TrueType font problem ^{CODESYS Forge talk (Post)}
Initially I had the same problem in CoDeSys when selecting a newly installed TTF font, while CoDeSys was running. I solved it by closing Codesys and running it again to restart the initialization process. After that, using the new font did not pop up errors. I also had cases with files that had a ttf extension, but were actually not TrueType.
Last updated: 2024-10-22

Post by daniel on SysFileOpen not working ^{CODESYS Forge talk (Post)}
Hello, I have the same problem now with 3.5.20 Patch 3. Normally it works if I ad in CODESYSControl.cfg: [SysFile] ForceIecFilePath=0 (This told me codesys last time) I try to use the placeholders but without success. Something special is that the Files are not in C:. The Plc Configuration Path is not as usual C:\ProgrammData\CODESYS\CODESYSControlRTEV3\, it's E:\Control.
Last updated: 2024-10-23

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
okay, the weird thing is the driver is only continuous running when i enable debug output. if debug is not enabled it's continuous switching from running to not running. i will check again and download the libraries Which versions of libraries do you use, can you send a screenshot?
Last updated: 2024-11-08

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Sorry, wrong expression. You have a 64bit system, so do I. You can also use the 64bit runtime, but most bib and commands are 32bit and are not properly supported. I had read somewhere that there are problems with I2C. That's why I recommend switching to PI_SL and using the correct gpio.
Last updated: 6 days ago

Post by timvh on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
If you are really happy with PLCnext engineer, then just use that. There is probably also something in CODESYS that cannot be done in PLCnext engineer. But if you are forced to make something like this in CODESYS, then maybe just use CFC instead of FBD.
Last updated: 5 days ago

Post by sigurdrb on Codesys SP20 and professional developer edition ^{CODESYS Forge talk (Post)}
Hi, I updated codesys IDE to the newest version, but I lost the "professional developer edition" in the process. It still works fine on the older version I have been using previously. Do you know what the easiest process for getting the same integration in the newer version? It is only the GIT integration that I really miss.
Last updated: 4 days ago

Sort by relevance or date