Post by lukaszklupa on Codesys Virtual Control - startup problem ^{CODESYS Forge talk (Post)}
Hello I have a problem with starting Virtual Control, details in the attached screenshots. My system is Ubuntu 24.04 LTS. What's the problem? Is anyone able to help?
Last updated: 2024-08-13

Post by tgf2024 on Dynamic I/Os Mapping ^{CODESYS Forge talk (Post)}
Hi Jinlee, how are you? I have similar application requirements on my project. I have tried dynamic mapping, but the code cannot detect the IO module change when I did hot switch. Do you find the way of how to identify the module change dynamicly? Thanks.
Last updated: 2024-08-15

Post by dennisyhli on Ethernet IP Connection timeout ^{CODESYS Forge talk (Post)}
I use ethernet ip scanner and the connection type is set to multicast. After running the PLC, the ethernet IP will have a connection timeout every 10 seconds. What is the reason for this error?
Last updated: 2024-08-16

Post by remoyang on Package manager ^{CODESYS Forge talk (Post)}
When I opened the package manager, it comes up the error as attached. I tried to uninstall and re-install many times it has the same issue
Last updated: 2024-08-16

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
Hi, I am very new in Codesys so let me apologize for my dumb question. Could you explain how to impement this code mentioned before? Thank you very much!
Last updated: 2024-08-17

Post by ruobian on Analog Input Delay Timer ^{CODESYS Forge talk (Post)}
Hello there, I am new here and in programming. I need help with the basics. I am trying to do what I mentioned in the title. I have an analog input. So I have a real or integer data type value. I want to delay it. TON and TOF only work with bool. I think there is a function block that has two inputs, 1 for real or int and 1 for bool. And if bool is true, it will give the output as real or int. I don't know but I need something like this. Actually, it is not exactly like that. In other words, it will not show the real value at the input at the output after a certain period of time. I want it to show the real value from 2 seconds ago continuously. The purpose of doing this is to compare the real value I received with the value from 2 seconds ago and find out whether it went up or down. I am using only FBD. Please help me with this. Thanks in advance.
Last updated: 2024-08-20

Post by dkugler on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
is your pointer set to the correct visu client? set a breakpoint in your client iteration and step through the active visu clients like programming system, targetvisu, webvisu,... and check the last usage value of each client
Last updated: 2024-08-30

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
If I select "Update boot aplication" while I download the code the persistent variables got a constant startup value. But during the running I am still not able make the persistent variables to hold they actual value.
Last updated: 2024-09-01

Post by reinier-geers on Syssockping hang up V3.5.9.2 ^{CODESYS Forge talk (Post)}
For data logging on a server i check the connection with Syssockping. When i do that it seems to hang uo the system once a while for 13 seconds. Why ??
Last updated: 2024-09-02

Post by damian177 on OPC UA Client ^{CODESYS Forge talk (Post)}
When I try connect by other OPC UA Client everything is ok. Look like codesys have a problem with 'Tags' group. It possible add manually measurements form 'tag' group to codesys ?
Last updated: 2024-09-03

Post by dkugler on CmpCrypto CryptoGenerateHash Not Outputting ^{CODESYS Forge talk (Post)}
looks like your _hHash handle is "empty" (00000) at the breakpoint! I don't know if CryptoGetAlgorithmById(...) call in the VAR section is possible? would be good to know.
Last updated: 2024-09-06

Post by dengsberg on Check Connection Status of the OPC-UA Server for Data Source Manager with OPC-UA Client ^{CODESYS Forge talk (Post)}
Another question is how to test the quality of the individual variable?
Last updated: 2024-09-07

Post by dkugler on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
https://forge.codesys.com/forge/talk/Visualization/thread/b12815b7cd/#877a there was a discussion about this thematic searching in the talk helps to learn from others... good luck, Dave
Last updated: 2024-09-10

Post by runtimevictor on codesys VLAN tagging ^{CODESYS Forge talk (Post)}
Thank you very much for answering, I look forward to the example. As soon as the example or documentation is available, please let me know... thank you.
Last updated: 2024-09-10

Post by trycyclepower on EtherCAT drive going into fault mode require power cycle everytime ^{CODESYS Forge talk (Post)}
I have EtherCAT servo drive lost communication with PLC everytime it gets faulted, it does not not communicate until I power cycle everything again, how to solve this issue?
Last updated: 2024-09-11

Post by jinlee on IP Camera on the Webvisu ^{CODESYS Forge talk (Post)}
Hi guys, I am experiencing the issue that browser element can't show anything other than wbm of my PLC. I am using WAGO PFC200, trying to feed IP camera into web browser element. Can anyone helps me ? Kind regards, Jin
Last updated: 2024-09-12

Post by atle on Silent install for CODESYS 64 3.5.19.0 ^{CODESYS Forge talk (Post)}
Hello. Msiexec is really touchy about right parameters alignment. Because InstallShield Setup handover parameters without initial space, "CODESYS 64 3.5.19.0.exe" /S /v"/qn /norestart" have to be formated with space after quotes. "CODESYS 64 3.5.19.0.exe" /S /v" /qn /norestart"
Last updated: 2024-09-12

Post by ph0010421 on Stack overflow with really simple function ^{CODESYS Forge talk (Post)}
Hello I wouldn't call an FB from inside a FUN; it feels wrong to me. I have had something similar. Try declaring the FB instances as GlobaVars rather than the instance memory.
Last updated: 2024-09-17

Post by fmbrew-rob on Licensing info not available. ^{CODESYS Forge talk (Post)}
Was there ever any resolution to this? I am using Virtual Control SL on a ProxMox setup, and I can't get the license installed. I get the same errors reported above.
Last updated: 2024-09-21

Post by opineiro on How to manage variable types larger than 64 bits - Ethernet/IP ^{CODESYS Forge talk (Post)}
Thanks, that's what I thought initially. The point is that I can't select a String type variable. See the attached image
Last updated: 2024-09-23

Post by yannickasselin on ControlWin 3.5.20.30 Issues ^{CODESYS Forge talk (Post)}
Hello, Trying to install ControlWin 3.5.20.30 on Windows 10 Enterprise 2016 LTSB and I always get this error about the gateway. 3.5.20.20 is working fine. Any ideas why? Thank you
Last updated: 2024-09-26

Post by timvh on Readable IO names ^{CODESYS Forge talk (Post)}
IF you create an ENUM {attribute 'qualified_only'} {attribute 'strict'} TYPE E_IO : ( FIRST := 0, SECOND := 1 ); END_TYPE You should be able to access the array items like: IOCard_OUTPUT[E_IO.FIRST]
Last updated: 2024-09-28

Post by timvh on Newly created texlists wont appear in the selection dropdown ^{CODESYS Forge talk (Post)}
Only idea I have is that new textlists are not loaded with an online change. When you add them, maybe you always have to do a full download first.
Last updated: 2024-09-28

Post by dangjoris on Missing function for ConfigGetParameterValueBool (SM3RaspiStepper) ^{CODESYS Forge talk (Post)}
Hello, I've been trying to get the SM3RaspiStepper application working for a long time, but the function block with the function ConfigGetParameterValueBool and ConfigGetParameterValueLReal is always missing. Does anyone know how I can get them? I also added a screenshot.
Last updated: 2024-09-30

Post by jacobwago on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Hello All, The solution is updating SP19 Modbus version from 4.3.0.0 to 4.4.0.0 (see attached image for bug fix). Thank you,
Last updated: 2024-09-30

Sort by relevance or date