Post by onstage on Update Raspberry Pi option is missing under Tools menu ^{CODESYS Forge talk (Post)}
The logger at the bottom of the deprecated RPi tool was quite useful, where can it be found now?
Last updated: 2025-06-11

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by latassan on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
Hello, I'm trying to use a raspberryPi 5 as a PLC. I fixed its IP address, I can ping it. I've also installed the CODESYS Control for Raspberry Pi 64 SL runtime on it. So I've created a gateway (IP address of the Raspberry, TCP port 1217). I see the green dot next to this gateway. When I do a network scan, I can see my raspberry (see photo). When I try to connect to it, I have to define an administrator profile, which I do. On validation, I see a message: No device is responding to the scan request. I've checked that port 1217 is listening on the raspberry, I've uninstalled the runtime then installed it again, but I can't connect. Also, when I try to configure the user groups before connecting, I see that Offline mode is not supported by the device, even though I'm connected to it in the Deploy Control SL tab. When I try to refresh, I see: Gateway not configured properly. How can I connect to my Raspberry? Have I defined my gateway incorrectly?
Last updated: 2025-06-12

Post by eschwellinger on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
Do you use the same type Raspberry PI64 SL in the device tree? Which version of the Pi package / Runtime do you use? 4.16.0.0?
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
For reference this is fixed by installing the new codesys install with a separate repository folder. Completely resolved. If anyone else sees this. I would like to know why the persistent devices repository folder does not properly retain between installs though.
Last updated: 2025-06-12

Post by tk096 on How to get the motor scaling value from code ^{CODESYS Forge talk (Post)}
Hi, unfortunately, in Softmotion you have only access to the combined fraction - the scaling factor from user units to motor increments. It can be accessed using MC_ReadParameter with parameter number 1054. increments = user_unit_position * fScaleFactor
Last updated: 2025-06-13

Post by tk096 on SMC_ReadNCFile2 is always busy ^{CODESYS Forge talk (Post)}
Hi, do you process the sentences subsequently? If not, the function block fills the sentences (queue) and waits for the sentences to be processed, so that new sentences can be read and filled to the queue.
Last updated: 2025-06-17

Post by milan-svarny on Redundancy problem - primary PLC suddenly goes to simulation state ^{CODESYS Forge talk (Post)}
Hi Ivanmaltar, please , did you solve the problem? i have the same case. Second PLC is going suddenly to Sim. state Thank you
Last updated: 2025-06-18

Post by taoufikaoun on Profinet Simulator ^{CODESYS Forge talk (Post)}
Hello, I am new to codesys i want to create 100% simulator profinet network only with virtual ethernet adapter it is possible. I want to use Codesys build in controller and device io for profinet. Thanks.
Last updated: 2025-06-20

Post by taoufikaoun on Profinet Simulator ^{CODESYS Forge talk (Post)}
Hello, I am new to codesys i want to create 100% simulator profinet network only with virtual ethernet adapter it is possible. I want to use Codesys build in controller and device io for profinet. Thanks.
Last updated: 2025-06-20

Post by nxbp on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
I Created cam with 361 cam points ( 0,1,2.....360 ). The values in the Cam_A array do not match the Cam points entered in the Cam editor.
Last updated: 2025-06-22

Post by programmer on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
Hi, Is there a solution found for the problem described in first post? Any version above Codesys 3.5 P19 hangs during start up. It makes no difference whether I simply start Codesys or open a project directly. I'm using Windows 10 Home edition. Thanks!
Last updated: 2025-06-23

Post by eschwellinger on How to download dependencies packages for CODESYS Control for Raspberry Pi SL ? ^{CODESYS Forge talk (Post)}
with latest version? 4.16.0.0? Use the CODESYS Installer to download all required packages if you need an offline installation
Last updated: 2025-06-24

Post by jeindhoven on Deploying to raspberry pi 5 hangs ^{CODESYS Forge talk (Post)}
Yes, the putty connection from within the virtual windows 10 worked. No, the codesys runtime deploy from within the virtual windows 10 did not.
Last updated: 2025-06-25

Post by rckalex on Adjusting Ethernet Settings from Visualization ^{CODESYS Forge talk (Post)}
Could someone please share reference documentation for interacting with a device's IP settings from a visualization/webvisu? Is what is outlined here still valid? https://forge.codesys.com/forge/talk/Engineering/thread/ad11c199a2/
Last updated: 2025-06-26

Post by tk096 on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
Hi, in the XYVA compile format the editor is adding an additional point if the derivatives are jumping at this point. However, this should not change the path?
Last updated: 2025-06-30

Post by nielscho on Saving "Input/output names" in a DCF file ^{CODESYS Forge talk (Post)}
Hello i have the same question but for Codesys 3.5. alternativley, could somebody name a Programm to create a DCF file out of an EDS? best regards
Last updated: 2025-07-02

Post by matto99 on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
is there any plans to include the Rapsberry pi5 IOs ? At this time we still have the folowing restriction "CODESYS Control for Raspberry Pi SL unterstützt keine GPIOs auf dem Raspberry Pi 5"
Last updated: 2025-07-03

Post by mickael on stepper motor + Raspberry pi 5 + Codesys ^{CODESYS Forge talk (Post)}
Hello, I can't figure out how to configure the DIR and STEP pins of the GPIO for an SM_Drive_RaspiStepper_Pulsdir axis. Can you send me a scan? Also, does the MC_POWER status always remain False? Thanks.
Last updated: 2025-07-06

Post by mickael on Motor stepper raspberry pi 5 Codesys ^{CODESYS Forge talk (Post)}
Hello, I can't figure out how to configure the DIR and STEP pins of the GPIO for an SM_Drive_RaspiStepper_Pulsdir axis. Can you send me a scan? Also, does the MC_POWER status always remain False? Thanks.
Last updated: 2025-07-06

Post by eschwellinger on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Welche version genau verwendest du? Das Verzeichnis des Configfiles hat sich ja zu 3.5.20.10 verschoben..durch nen Security Bugfix. Schau dir das Log beim starten an, da müsstest du sehen ob die KNX Komponente geladen wird.
Last updated: 2025-07-07

Sort by relevance or date