Post by dkugler on Reading a negative number ^{CODESYS Forge talk (Post)}
why not simply converting data type UINT to INT? Then avoid negative values with ... := MAX(0 , intTest); Good luck!
Last updated: 2025-05-28

Reading a negative number ^{CODESYS Forge talk (Thread)}
Reading a negative number
Last updated: 2025-05-28

Version management ^{CODESYS Forge talk (Thread)}
Version management
Last updated: 2025-05-28

Post by thomasd on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
Last updated: 2025-05-28

Post by thomasd on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
Last updated: 2025-05-28

Post by thomasd on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
I run Pop OS and use Virt manager with Qemu and win 11 . Been running this for about 4 years.
Last updated: 2025-05-28

Post by nz-dave on IFM Controller Connection Issue ^{CODESYS Forge talk (Post)}
So you don't see the device when scanning for devices? Im not familiar with that device. how dose it connect? serial/ethernet?
Last updated: 2025-05-29

Post by critcho on WebVisu Numpad dialog - Dialogtitle not accepting string variable ^{CODESYS Forge talk (Post)}
I have a WebVisu page which is re-used for multiple types of gas; it displays the alarm thresholds etc. for one gas at a time. I have an array of structures holding the set-points for each of the gasses. I'm trying to change the dialog title for the value input pop-up (VisuDialogs.Numpad). The Dialogtitle is set to Gas_Alarms.HighAlarmActivationLevelDialog, which is a string(50): When the gas type is changed (page first loaded, or prev/next buttons), METHOD Gas_Alarms.Update_Display_Variables is called, to update the strings used for the dialog titles so it shows GasName High Alarm Activation Level (EngineeringUnits), e.g. CO2 High Alarm Activation Level (PPM): HighAlarmActivationLevelDialog := Insert(' High Alarm Activation Level ()', EngineeringUnits, 30); HighAlarmActivationLevelDialog := Insert(HighAlarmActivationLevelDialog, GasName, 0); (That's not where the problem is, I'm just explaining why I'm using a variable dialogue title.) The variables used are definitely strings, but i'm always getting the error: "The type of the dialog title must be either STRING or WSTRING". I've tried moving HighAlarmActivationLevelDialog etc. to the GVL and also changing them to WSTRING, I even tried adding them to the structure array, but I always get the same error. Clearing the dialog title for that element removes the error - so I'm confident it's not a phantom error caused by something else. But I should be able to add these titles, can't just nuke them all to make it work. The MinVal and MaxVal for the Numpad are called from the array, e.g. GVL.Gas_Alarm_Configs[0].ScaledValueMIN, they are not getting an error. I am using array indexes 1 - 5 for the gasses, when I load the form or change gas, I copy the selected index to index 0 of the array, and values from Gas_Alarm_Configs[0].[ALL] are displayed on the page. When they hit save, I copy Gas_Alarm_Configs[0].[ALL] to Gas_Alarm_Configs[CurrentGasIndex].[ALL]. (ALL just means every element, I can't figure out how to display an asterix in this question... :) ) I've searched online for variable title dialog, but not found anything to help. Thanks for your help!
Last updated: 2025-05-29

WebVisu Numpad dialog - Dialogtitle not accepting string variable ^{CODESYS Forge talk (Thread)}
WebVisu Numpad dialog - Dialogtitle not accepting string variable
Last updated: 2025-05-29

Post by ggis on Manage Gateways between different CODESYS IDE versions ^{CODESYS Forge talk (Post)}
Hi, I'd like to share the list of gateways between different versions (and sandboxes) of Codesys IDE. I refer to the list that is managed in Device > Communication Settings (as described in https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_edt_device_communication_settings.html ) Can I export/import that list? Or is there a file that I can copy from one installation to another one? Thank you GG
Last updated: 2025-05-28

Post by edson-bueno on IFM Controller Connection Issue ^{CODESYS Forge talk (Post)}
Hi, Could you please send an print of your ethernet adapter info? Ip addr Subnet Mask Default Gateway Also, check if the gateway service is active in your windows. Win+R > services.msc > Look in the list CODESYS Control Win V3 x64 Gateway OR CODESYS Gateway V3 Hook up the M12 code D into the ETH port, supply the controller, it should apperars to you. Make sure when you try to connect with the controller, the target of your project has to match with the controller. Otherwise, click on the device in the devices tree > Communications Settings tab > Device > Options > And disable "Filter Network Scans by Target ID". Good luck.
Last updated: 2025-05-29

IFM Controller Connection Issue ^{CODESYS Forge talk (Thread)}
IFM Controller Connection Issue
Last updated: 2025-05-29

Post by laurits on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Testing Codesys CNC. SMC Interpolator Throws me an error if my code surpass approximately 32000 lines of code. (SMC_CNC_INTERNAL_ERROR) What is the max lines of code SMC Interpoltor can handle ? I've been thinking breaking the code up into smaller sections, but that gives me a lot problems later if i want to use "Blocksearch" etc. I need to run approximately 2000000 lines of code.
Last updated: 2025-06-01

Post by kevinl on Unerwünschte Username- und Passwortabfrage im Browserfenster ^{CODESYS Forge talk (Post)}
Guten Tag allerseits Gibt es mittlerweile eine Lösung für dieses Problem? ich habe eine Visu, die für jedermann einsehbar sein soll, jedoch gewisse elemente sollen nur nach einem Login einsehbar sein. Was ist die offizielle Lösung dafür?
Last updated: 2025-06-01

Unerwünschte Username- und Passwortabfrage im Browserfenster ^{CODESYS Forge talk (Thread)}
Unerwünschte Username- und Passwortabfrage im Browserfenster
Last updated: 2025-06-01

LS ix7nh Servo drive with Codesys ^{CODESYS Forge talk (Thread)}
LS ix7nh Servo drive with Codesys
Last updated: 2025-06-02

Post by selim on LS ix7nh Servo drive with Codesys ^{CODESYS Forge talk (Post)}
Hello Mr./Ms., I do not find the ES driver in codesys. The setup of the project is "Rasberry PI3B>Ls ethercat I/O aps-ec-dt32k> LS ix7nh Servo drive>apmc-fbl04amk LS servo motor". How can i slove this problem. Please provide me a proper solution.
Last updated: 2025-06-02

Post by sbhaskarla on Custom Fonts within WebVisu ^{CODESYS Forge talk (Post)}
Bumping this issue, any insight on this anyone?
Last updated: 2025-06-02

Custom Fonts within WebVisu ^{CODESYS Forge talk (Thread)}
Custom Fonts within WebVisu
Last updated: 2025-06-02

Stweep license activation error ^{CODESYS Forge talk (Thread)}
Stweep license activation error
Last updated: 2025-06-02

Post by josealb2000 on Stweep license activation error ^{CODESYS Forge talk (Post)}
When trying to activate a brand new Stweep license I get error 104 on one softcontainer and error 260 on another softcontainer.
Last updated: 2025-06-02

Post by tk096 on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Hi, is it possible to attach the project and g-code?
Last updated: 2025-06-03

Post by laurits on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Hi, okay here's the project, it's a modified version of "CNC Example 10: Programming Dynamic CNC Paths", no need for G Code text file (i have also tried with G code text file, same problem) in "PROGRAM PLC_PRG" you can set bStart to true, and the program should start running, go to "PROGRAM CNC" and you can see axis moving. lrXpos := IoConfig_Globals.XAixs.fSetPosition; lrYpos := IoConfig_Globals.YAxis.fSetPosition; Now you can can change the number of movements in the the "PROGRAM PLC_PRG" From this number of movements in "program PLC_PRG" BUF : ARRAY[0..32010] OF SMC_GEOINFO; xp : ARRAY[1..32000] OF REAL; yp : ARRAY[1..32000] OF REAL; to this number to this number of movements BUF : ARRAY[0..132010] OF SMC_GEOINFO; xp : ARRAY[1..132000] OF REAL; yp : ARRAY[1..132000] OF REAL; Now if you start the program again you should see an error in the "sMC_Interpolator: SM3_CNC.SMC_Interpolator;" function block Let me know if you can not get it running.
Last updated: 2025-06-03

Post by rockallsue on Frustration-Fueled Feedback on Project File Management and Git Integration ^{CODESYS Forge talk (Post)}
Some developers export ST code manually and edit it in VSCode, then copy it back. However, a more practical approach might be using automation scripts (PowerShell, Python) to extract and inject code into the CODESYS project. You could also check if CODESYS Automation Server or CODESYS API allows better ST access for external tools. https://www.codesys.com/the-system/releases-updates-lifecycle/release-plan-roadmap.html Network drive issues are particularly painful. As a mitigation, you could try using local project storage with periodic cloud sync instead of directly saving to a network drive. Using Rsync or Syncthing for automatic but safe synchronization might reduce risks of file corruption.
Last updated: 2025-06-03

Post by thomasfrank on TCP Server ^{CODESYS Forge talk (Post)}
You can use function blocks like TCPServer to start the Retro Bowl College server and TCPAccept to handle incoming connections, with CAA.Handle simply acting as a reference ID for each resource.
Last updated: 2025-06-03

Sort by relevance or date