Codesys Control for PLCnext SL, Bus not running ^{CODESYS Forge talk (Thread)}
Codesys Control for PLCnext SL, Bus not running
Last updated: 2024-08-12

Scan Network on gateway created with Control Sl ^{CODESYS Forge talk (Thread)}
Scan Network on gateway created with Control Sl
Last updated: 2024-10-23

Post by timvh on Minimum system requirements for codesys control standard S ^{CODESYS Forge talk (Post)}
It depends on your application which CPU speed and RAM size you need. If you think the Control Standard S license is sufficient then my guess is that your selected PC has no problem running your application. There are no more "hardware" based single licenses available anymore, only application based licenses. So this "Raspberry Pi" restriction for home automation is not applicable anymore. For more information see: https://store.codesys.com/en/howto_applicationbasedlicenses
Last updated: 2024-01-14

Post by sonnh on How to use more 4 instances of CANopen/Profibus/Modbus with The application-based license CODESYS Control ^{CODESYS Forge talk (Post)}
The codesys application license allows the use of up to 4 fieldbus instances (eg Modbus). I need to use more instances than that. Can I use the Modbus library instead? Does this usage require a license? Similar to other libraries such as CanOpen, Modbus TCP...
Last updated: 2023-11-02

Post by jaspergain on SoftMotion Axes issue ^{CODESYS Forge talk (Post)}
Dear, We have an issue with SoftMotion and it's licensing. We don't use SoftMotion in this project. But a SoftMotion license is required by it. The License metrics tell's us there is a -1 Axes. Is there a way to reset this? Delete this? There was a MotionControl device in the project, but we have deleted this. But it stayed at -1. Thanks for you help.
Last updated: 2024-02-29

Post by danwoodlock on Rpi zero w lost license after 4.11 update ^{CODESYS Forge talk (Post)}
Hello all, Encountered an issue with my zero which seems to have happened after the 4.11 update. It now runs in demo mode (2hr) and I am trying to see what the appropriate steps are prior to contacting codesys directly. Background: I recently did a fresh install of w11 on my pc, so it seems "c:\ProgramData\CODESYS\Licenses\" only has information related to my pi5, which I licensed just this past Friday. I have all my license documentation about my rpi zero as far as the emails received, but when I try to claim using the ticket number it says its already been used, or something to that effect, which it was. Currently trying to perform device license reader, which is taking some time.
Last updated: 2024-04-14

Post by timl on Application has invalid license metrics ^{CODESYS Forge talk (Post)}
Hallo, ich habe eine Control for Linux SL auf der ich einen TCP Modbus Master anlege, mit dem ich einen Slave auslesen möchte. Das Anlegen funktioniert soweit alles, sobald ich beim ModbusTCPSlaveE/A-Abbild in den Channel eine Variable einfüge, damit ich den Channel auslesen kann, kommt es beim übertragen auf die SPS zu einem Ausnahmefehler. Im Anhang noch eine Bilder der Fehlermeldung und der installierten Lizenzen. CODESYS Version ist V3.5 SP19 Patch 4 Meinem Verständnis nach ist die Modbus Lizenz mit in der Control Standard L inbegriffen und auch in der Lizensierten Softwaremetrik sehe ich keine überschreitung meiner Lizenzbegrenzungen. Daher verstehe ich nicht wieso ich diesen Fehler bekomme und eine auslesung via Modbus nicht möglich ist. Gruß Tim
Last updated: 2024-05-08

Post by user0815 on Web Socket Client SL -Bibliothek Fehler ^{CODESYS Forge talk (Post)}
Es sind keine exceptions im Log. Ein warning (no runtime license - running in demo mode(~2 hours) und der eine Fehler. Also bevor ich probiere was zusenden. Nach dem senden kommen zwei Ausnahmen dazu. Das Bild mit den Ausnahmen packe ich mal oben zu den anderen
Last updated: 2023-12-19

Post by damian177 on OPC UA Client ^{CODESYS Forge talk (Post)}
Hi, Today I ran OPC UA Client Example in 1.1.0.0 version. I opened example visualisation and I tried connected to my OPC UA Server. In first steps looks good but connection was terminate with error OpcUa_BadLicenseLimitsExceeded. I can't test OPC UA Client witohut CODESYS OPC UA Client SL license ? Regards
Last updated: 2024-08-30

Post by davidbo on RPI is license server down ^{CODESYS Forge talk (Post)}
It was but is running again
Last updated: 2023-10-19

Post by john-martin on RPI is license server down ^{CODESYS Forge talk (Post)}
In this moment the server is down.
Last updated: 2023-10-19

Post by toby on SM Drive license error ^{CODESYS Forge talk (Post)}
Hi albert1999 and forest, I hope you are well. I too am wondering if you have found any solutions? Im working with a RPi and a Omron R88D-ETH servo amplifier. The SoftMotion is timing out after 30min without the license, but I cant figure out how to license it, and I seem to have some compatibility issues between my RPi license and any SoftMotion licenses. Did you guys have any luck? Thank you very much for any assistance offered. Toby
Last updated: 2024-01-10

Post by jshirazi on Restore license on Raspberry Pi ^{CODESYS Forge talk (Post)}
Hi, I recently got a license for Raspberry Pi, after license activation I made a backup copy of "CMLicenseNew.WibuCmRaU" file to a safe place. Things got complicated and I tried to downgrade OS for some reason after that I tried several times/ways to restore my license with no luck. the specifications are as follows: Raspberry Pi 4 Model B Rev 1.1 codesyscontrol 4.10.0.0 SDK 3.5.19.30 Logs: **** ERROR: CodeMWriteLicenseFile: 'CMLicenseNew.WibuCmRaU' failed: Container not found or Server dose not support .... So if someone know a solution for this please kindly help me. Regards
Last updated: 2024-02-03

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
check on cli on your device 'cmu -x'
Last updated: 2024-03-19

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
will send out vplc preliminary version...!
Last updated: 2024-03-21

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
which CODESYS version? Dongle or Softcontainer?
Last updated: 2024-03-30

Post by gabrielmorte on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, did you get it to work? I'm having the same problem.
Last updated: 2024-03-30

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
It doesnt see the dongel on my computer
Last updated: 2024-04-11

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
please write to 'my question' in the CODESYS store.
Last updated: 2024-04-16

Post by valenting on Can't use new licensing with Raspberry Pi ^{CODESYS Forge talk (Post)}
Thank you, it worked
Last updated: 2024-04-22

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Also funnie. Codeys is a Leading Hardware-"INDEPENDENT"
Last updated: 2024-05-01

Post by jeffg on License issue with visu tags ^{CODESYS Forge talk (Post)}
I seem to be having a problem with the license on ver 3.5.19 patch 5 The runtime keeps going into demo mode but it wont tell me the reason I looked at the license software metrics and the visu doesn't appear to be working I attached screen shots of the metrics screen and the license dongle that is plugged in to the windows PC Anyone have any ideas on how to fix this
Last updated: 2024-06-28

Post by timvh on Communication between applications on same device/controller/runtime (Win RTE 3.5.20.20) ^{CODESYS Forge talk (Post)}
The RTE will take the RTE license. The HMI will take the HMI license. For the Application Based Licenses, the Runtime will take the smallest which is required. So if you have an application running EtherCAT and no visualization, only the Control with support for EtherCAT is used. If you have another runtime which requires the visualization, it will take the smallest Control license which is required and available + the smallest visualization license which is required.
Last updated: 2024-10-01

Post by exkrim19 on Unable to connect to this device ^{CODESYS Forge talk (Post)}
What worked for me with this error was to go to Tools -> Update Raspberry Pi, select Install, and from the popup screen, there are options to change your installation (I changed it to single core, instead of multicore), and I was then able to connect to my Rpi 4.
Last updated: 2024-06-28

Post by camilloo on Control for Linux SL on Ubuntu Core ^{CODESYS Forge talk (Post)}
Hello, Has anyone tried running CODESYS Linux on Ubuntu Core? I'm having problems installing the runtime. The connection to UC cannot be established. I used the instruction: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_linux_public_key_authentification.html I can connect to UC using SSH (putty, shell). Codesys can't. Do any of you have an idea?
Last updated: 2024-02-24

Sort by relevance or date