Post by timvh on Automatic xExecute NBS.TCP_write ^{CODESYS Forge talk (Post)}
Use e.g. the condition: TCP_Connection_0.xActive AND NOT(TCP_Write_0.xDone)
Last updated: 2024-03-05

Post by eschwellinger on Estun servo with codesys ^{CODESYS Forge talk (Post)}
you need to add the EDS file here to check..
Last updated: 2024-03-11

Post by mp9876 on Device User Logon ^{CODESYS Forge talk (Post)}
Just adding some info regarding the issue above. Logged onto the project using dev3og5 user (see screenshots); appeared to be ok although when attempting to logon to the device message says 'currently not authorized to perform this operation on the device' (screenshot). If user dev3og5 has same permissions as Owner user; why would it not be authorized. I am at a loss; any assistance would greatly be appreciated. Thank you Mike
Last updated: 2024-03-16

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi everybody We are currently working on a project with an RS232 serial COM interface and using the CAA SerialCOM library. We have it working fine reading and writing data, although we have found an issue we cannot resolve and any suggestions would be helpful. We have noticed that after a while the RS232 stops working. We have tracked this down to the HANDLE hCom keeps increasing and when this reaches 1023 the COM returns an unknown error "5003". Is there a way to reset this hCom reference? Thanks Richard
Last updated: 2024-03-22

Post by eschwellinger on Properties feature request ^{CODESYS Forge talk (Post)}
use in the CODESYS store to - 'my question' to send it
Last updated: 2024-03-26

Post by stuartjr on Webvisu IE Page Scroll Bars ^{CODESYS Forge talk (Post)}
Is it possible to get scroll bars to show when displaying a web visualization in V2.3? I've got some big pages that I can scroll around when using the in-built visualization but when they are displayed in IE i can't seem to scroll around. All I can do it drag the window bigger onto my other display to get access to the extra area. I've also tried zooming the page out in IE but this doesn't seem to work at all.
Last updated: 2024-03-28

Post by gabrielmorte on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, did you get it to work? I'm having the same problem.
Last updated: 2024-03-30

Post by pjoret on IFM CR711S Can Low Level Library Use ^{CODESYS Forge talk (Post)}
Hello, I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part. I already use it on the Standard part and it works properly. I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ? And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It. Have a nice Day.
Last updated: 2024-04-03

Post by danieldiaz on Problem with FB execution ^{CODESYS Forge talk (Post)}
Problem Solved, I was overwriting the variables somewhere else
Last updated: 2024-04-05

Post by flavinhofh on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
what was the solution guys ?
Last updated: 2024-04-10

Post by flavinhofh on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
what was the solution guys ?
Last updated: 2024-04-10

Post by flavinhofh on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
what was the solution guys ?
Last updated: 2024-04-10

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
It doesnt see the dongel on my computer
Last updated: 2024-04-11

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
please write to 'my question' in the CODESYS store.
Last updated: 2024-04-16

Post by valenting on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
Hi, When I try to install my codesys program with the new application-based licensing, I have an error "it exceeds the scope of the license agreement. See Device > Licensed Software Metrics" In the Licensed Software Metrics section, I see a code size < 3MB and less than 2700 variables in visualiaztions. I'm using a license "Control Basic L" with "Codesys Visualization L" option, so it should be enough with these metrics. What can I do ?
Last updated: 2024-04-22

Post by yongchaow on Can't connect to Device Raspberry Pi 4 from CODESYS IDE V3.5 SP19 ^{CODESYS Forge talk (Post)}
Hi, eschwellinger, I have the same problem, but I can not resolve the problem following this forum. There are my situation: pi@RevPiXXXX:~ $ uname -a Linux RevPiXXXX 5.10.120-rt70-v7l #1 SMP PREEMPT_RT Thu, 28 Jul 2022 10:36:48 +0200 armv7l GNU/Linux After "top": It looks like runtime is not running. One more piece of information to refer to, when I reboot the device it is possible to scan the device. Looking forward your reply.
Last updated: 2024-04-25

Post by dhumphries on Trouble installing codesys 64 3.5.19.0 ^{CODESYS Forge talk (Post)}
Are you running the installer with admin privileges?
Last updated: 2024-04-28

Post by hezhikui on Kalman Filter ^{CODESYS Forge talk (Post)}
hi,Matteo i find an article,it maybe helpful. see the attachement Hezk
Last updated: 2024-05-05

Post by hjohnson123 on Automatically selecting a visualization element ^{CODESYS Forge talk (Post)}
I'm looking to automatically select a text field element in my visualization. I'm not sure if this is possible, as I don't know how to get the data on specific elements. I am wanting automatic selection of the text field, as I am using a keyboard-input barcode scanner, which should always input the barcode into the text field whenever a barcode is scanned. Does anyone know if this can be done?
Last updated: 2024-05-21

Post by nelsonreis on Help with IFM EcomatController CR710S in Codesys ^{CODESYS Forge talk (Post)}
Hi, Recently I bought a CR710S controller from IFM. I installed Codesys V3.5 SP11 as recommended and all required packages (including the safety packages and the IOWrapper package). However, I can't even open the project template without getting errors related to libraries failing to load (below in the first print screen). Then, clicking ok appears only 2 errors (second print) and when trying to go to simulation and login I get another 2 different errors (third print). I really appreciate any help anyone can provide, I'm completely stuck on this right now.
Last updated: 2024-06-04

Post by installwhat on Camera Feed (CCTV) ^{CODESYS Forge talk (Post)}
https://www.youtube.com/watch?v=y_l2siXY7dA check the project from this video
Last updated: 2024-06-23

Post by wollvieh on License Activation Problems ^{CODESYS Forge talk (Post)}
on a raspberry pi delete the folder and its content before licensing. /var/opt/codesys/cmactlicense If you plug this SD card in another raspi ( which has another hw-serial number) you'll get a second empty softcontainer. This could lead to an unlicensed PFC (it could only handle one container) The solution is: To delete the /var/opt/codesys/cmactlicense directory and content of it and then aktivate the lizenz via WibuCmRau file and Lizenzmanager.
Last updated: 2024-06-24

Post by mizi on SM_Drive_Virtual ^{CODESYS Forge talk (Post)}
Hi I recently started learning Codesys SoftMotion. At first, I mainly used YouTube videos. I stopped at two videos where the same problem keeps recurring. fbReadPos( Axis := X_Axis, Enable := TRUE, Position => gAxes.lrActualPos); <- axis cannot move I checked the entire code line by line. Zero errors. GPT spits out nonsense, throwing up increasingly worse errors. And when I copy its code, it says the code is wrong and gets stuck in a loop of its own stupidity. Can anyone explain why it doesn't work? Link to the video below: https://www.youtube.com/watch?v=CYa2HvYZgbM&list=PLsEhEcYjG7na0OveU7cqFXBx7ATyGGn0A&index=3
Last updated: 2025-10-21

Post by eschwellinger on Unrecoverable SoftMotion state after switch to PreOp ^{CODESYS Forge talk (Post)}
i would recommend to check the plc log..
Last updated: 2025-10-23

Post by dinesh-vamtec on SysProcessExecute ^{CODESYS Forge talk (Post)}
I'm trying to open the Help.chm file in CodeSys ST, not working.
Last updated: 2025-10-24

Sort by relevance or date