Post by dengsberg on Disable Communications to 'Modbus_Server_COM_Port' from the logic ^{CODESYS Forge talk (Post)}
I have a serial Modbus RTU communicating to the Slave device. But when the control system is not in Run there is no power applied to one of the Modbus Devices. Can I enable / disable the communications to that Modbus Slave in the code based on my running mode, so I don't get all the errors?
Last updated: 2024-08-29

Post by bolopg on MODBUS TCP REGISTERS CODESYS V3.5 ^{CODESYS Forge talk (Post)}
Hi. I have a problem with MODBUS TCP MASTER. I treid to read HR in range 3027-3037 but I cannot read them. I have modbus slave chanel with offset 0x3037. I checked what I read and it looks like I am reading HR in range 1-10. What I am doing wrong.
Last updated: 2024-10-11

Post by timvh on Accessing ModbusTCP addresses from python ^{CODESYS Forge talk (Post)}
https://en.wikipedia.org/wiki/Modbus
Last updated: 2023-09-20

Post by eschwellinger on IoDrvModbusTCP_Diag not defined when using MODBUS ^{CODESYS Forge talk (Post)}
known issue hopefully solved to next version
Last updated: 2024-04-18

Post by ahuckphin on Issues with Modbus Slave with Raspberry Pi ^{CODESYS Forge talk (Post)}
duplicate
Last updated: 2024-07-11

Post by ph0010421 on MODBUS TCP REGISTERS CODESYS V3.5 ^{CODESYS Forge talk (Post)}
hello Use FC3 instead of FC4
Last updated: 2024-10-11

Post by bartspako on Connection between Beijer PLC and Schneider Tesys-Island using Modbus TCP ^{CODESYS Forge talk (Post)}
Last updated: 2024-10-16

Post by andy-yemm on Assertion Failed ^{CODESYS Forge talk (Post)}
I had similar assertion failed error messages today. I am fairly new to Codesys. I tried using SFC for the first time, I usually use ST. Anyway I had errors in some of my transitions. I copied and pasted transition code and forgot to change the target of the code. I started getting lots of the assertion errors but now I have sorted out the problems and it compiles OK the assertion error messages seem to have stopped. There do not seem to be any other responses to your post, did you resolve your problem?
Last updated: 2024-03-19

Post by laazik2 on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
I am actually wondering as well if there are plans to fix it or not? As adding two modbus devices creates it's own problems with connection limits and other issues, which some slave devices have.
Last updated: 2023-09-05

How to use more 4 instances of CANopen/Profibus/Modbus with The application-based license CODESYS Control ^{CODESYS Forge talk (Thread)}
How to use more 4 instances of CANopen/Profibus/Modbus with The application-based license CODESYS Control
Last updated: 2023-11-02

Post by gorditron on Modbus Slave RTU in der Applikation abschalten ^{CODESYS Forge talk (Post)}
Hallo, gibt es eine Möglichkeit die Modbus Slaves (ModbusSlaveComPort) innerhalb der Applikation über ein Variable zu aktivieren oder zu deaktivieren? Bilder als Datei Danke!
Last updated: 2023-11-09

Controlling PM564-eth PLC using Weintek HMI with MODBUS TCP/I. I keep getting communication errors. ^{CODESYS Forge talk (Thread)}
Controlling PM564-eth PLC using Weintek HMI with MODBUS TCP/I. I keep getting communication errors.
Last updated: 2021-02-15

Post by squiggleypuff on Can't Add New Version of Modbus TCP Master ^{CODESYS Forge talk (Post)}
Turns out Modbus was working despite the pre-compiler errors; I was reading the wrong addresses of the slave device, which was why I was seeing all 0s. Thanks for ignoring me.
Last updated: 2024-04-09

Post by brzozka100 on Change modbus server parameters from program ^{CODESYS Forge talk (Post)}
Hello, is there a possibility to change modbus server parameters (baud rate, parity, etc.) configured in devices tree from PRG? I need to be able to change them, for example, from HMI.
Last updated: 2024-07-16

Post by brzozka100 on Change modbus server parameters from program ^{CODESYS Forge talk (Post)}
Hello, is there a possibility to change modbus server parameters (baud rate, parity, etc.) configured in devices tree from PRG? I need to be able to change them, for example, from HMI.
Last updated: 2024-07-16

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by wagomikep on Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Post)}
Hello, Is there a maximum number of Masters that can connect to a Modbus TCP Slave that is configured in the device tree? Is this limited by the CODESYS IDE, or the manufactures hardware and CPU load? Thank you,
Last updated: 2024-08-01

Post by jacobwago on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Hello All, The solution is updating SP19 Modbus version from 4.3.0.0 to 4.4.0.0 (see attached image for bug fix). Thank you,
Last updated: 2024-09-30

Post by banialuk on Modbus TCP Server ^{CODESYS Forge talk (Post)}
I created Modbus Server TCP, but when I try started i have a error "TCP socet error" "Error on open/close/read/write TCP socket."
Last updated: 2024-10-21

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Most likely your IP address is set to 172.... because you use a VPN connection to your device. Probably best to use the other Ethernet interface for your modbus communication.
Last updated: 2024-10-24

Post by dawidr on Best practices for querying multiple MODBUS devices ^{CODESYS Forge talk (Post)}
Hi! What are the best practices for querying multiple Modbus devices? Single PRG or maybe multiple PRG (so basically multiple thread) per each Modbus device. In my current implementation I'm using single PRG and I'm utilizing FbMbMasterMultiQuerySerial and WagoAppPlcModbus.FbDigitalTwinMbSlaveDevice in eCockpit with PFC200. I've the timer with 2 seconds delay there and it was working fine for single device. But now I have three Modbus devices and for two of them I need to run 2/3 queries to get data from all registers. I noticed that the delays for getting the data from the Modbus devices is much bigger right now.
Last updated: 2024-07-31

Post by jp23 on Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Post)}
Hi all, I am attempting to use the Control Win V3 soft PLC to control a WAGO 750-315 remote I/O system via modbus RTU communication. I am struggling to connect to the device. I have been following this tutorial: https://www.youtube.com/watch?v=YlRfkESaNds I have setup my devices as shown in the images below. I have verified that my com port settings are correct as I am able to connect/control using modbus simulator software with these settings. I have also connected to a modbus master simulator program as instructed in the video, but the orange triangles will not go away. Additionally, I have updated my settings to 485 using the PLC shell. I have also set "always update variables" to enabled (1). Serial port, PCI-Bus, and modbus serial device status all show as "Not Running."
Last updated: 2024-08-26

Post by jp23 on Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Post)}
Hi all, I am attempting to use the Control Win V3 soft PLC to control a WAGO 750-315 remote I/O system via modbus RTU communication. I am struggling to connect to the device. I have been following this tutorial: https://www.youtube.com/watch?v=YlRfkESaNds I have setup my devices as shown in the images below. I have verified that my com port settings are correct as I am able to connect/control using modbus simulator software with these settings. I have also connected to a modbus master simulator program as instructed in the video, but the orange triangles will not go away. Additionally, I have updated my settings to 485 using the PLC shell. I have also set "always update variables" to enabled (1). Serial port, PCI-Bus, and modbus serial device status all show as "Not Running."
Last updated: 2024-08-26

Sort by relevance or date