Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
For small project, I would like to use my industrial computer as a PLC + Industrial Computer. Like that I can save the cost of one PLC. That why I am using Codesys on Linux. With the nic it is not working. I already set the IP adress with /etc/network/interfaces. Can it comes from there ? looking to "Control Linux SL" docuemntation it should work with rtu.
Last updated: 2024-10-23

Post by elektron785 on Dongle von Linux-Modul (ARM64) nicht erkannt ^{CODESYS Forge talk (Post)}
Die Ausgabe bei lsusb ist im ersten Post im Bild usb.png zu sehen - der Dongle wird als WIBU Systems CmStick erkannt. Um Codesys als Soft-PLC darauf zum laufen zu bekommen habe ich das Addon Codesys Control for Linux ARM SL installiert und mir einen Docker gebaut mit den Dateien: codesyscontrol_linuxarm64_4.10.0.0_arm64.deb und codemeter-lite_7.60.5625.503_arm64.deb Wenn ich den Docker ausführe sind die beiden Programme ja inbegriffen und Codemeter sollte eigentlich die Erkennung des Dongles sicherstellen. Gibt es eine Möglichkeit festzustellen, dass Codemeter korrekt ausgeführt wird?
Last updated: 2024-09-05

Post by dhumphries on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
I have a video demonstrating the procedure to install the runtime on a linux device. https://youtu.be/rj0dOhgnGjs?si=OJoA-kgc1saxIweR This demonstration shows how to install the runtime on a X86 based controller, it should be the same for an ARM based device, but you'll need to install the add-in for Codesys control for Linux ARM SL (or the 64 bit add-in.)
Last updated: 2023-12-30

Post by dhumphries on install codesys runtime on linux ^{CODESYS Forge talk (Post)}
Adding the command worked. I was able to deploy the runtime on an ubuntu server installation. Thanks!
Last updated: 2023-11-04

Post by eschwellinger on No Visu on RasPi ^{CODESYS Forge talk (Post)}
..on 4.12.0.0 release there it will be possible to deploy RemoteTargetvisu which is what you expect now. (next week)
Last updated: 2024-06-20

Post by eschwellinger on TargetVisu on Raspberry? ^{CODESYS Forge talk (Post)}
install this: https://store.codesys.com/de/codesys-targetvisu-for-linux.html via CODESYS Installer and deploy it by update command
Last updated: 2024-07-26

Post by chris12345 on IO-Link Lizenz ^{CODESYS Forge talk (Post)}
Moin, IO-Link läuft nur 30 Minuten im Demo Modus. In meinem Fall, brauch ich zusätzlich zur "CODESYS Control for Raspberry Pi MC SL" diese Lizenz :- https://store.codesys.com/de/codesys-io-link-master-for-el6224-sl.html Gruß Chris
Last updated: 2023-10-11

Post by eschwellinger on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
Ich fürchte fast, das musst du mal an den Wago Support adressieren.. oder vielleicht ließ hier einer mit?
Last updated: 2023-11-17

Post by ggis on Rasperry Control Debian 12 ^{CODESYS Forge talk (Post)}
From bash I usually see codesyscontrol.service as the runtime service. Taking a step back, I guess you used Tool > Update RaspberryPi SL interface to install the runtime: what does the info popup window tells you about your destination system?
Last updated: 2023-11-26

Post by root on Control for Linux SL on Ubuntu Core ^{CODESYS Forge talk (Post)}
..this is still not released therefore not available in the CODESYS Installer. This will come to 4.13.0.0 release but if needed preliminary might be possible on demand.
Last updated: 2024-03-04

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
Update: I found my error in the Scale function, where I used UINT_TO_REAL instead of DWORD_TO_REAL. I fixed it, errors unchanged.
Last updated: 2024-05-02

Post by rabaggett on CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Post)}
It is either my installation is bad, or there is a bug. I re-created the project in 3.5 SP19 and there are no errors or warnings. Compiles with no errors or warnings. The original was done in 3.5 SP20. Thoughts?
Last updated: 2024-05-03

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by radekkoza on How to use GPIO (and IOT2000 IO-Module) with CODESYS Control for IOT2000 SL ? ^{CODESYS Forge talk (Post)}
Hi I have this question I can't find anywhere what pins Di3 and Di4 have all the rest work . I have a 10 input iot2000 card
Last updated: 2024-05-05

Post by bschraud on Unerwünschte Username- und Passwortabfrage im Browserfenster ^{CODESYS Forge talk (Post)}
Leider habe ich keine Lösung für das Problem gefunden. Glücklicherweise konnte ich die "CODESYS Control for Raspberry Pi MC SL" wieder auf dem 32bit OS zum Laufen bringen.
Last updated: 2024-05-06

Post by damian177 on Codesys Control for Linux SL ^{CODESYS Forge talk (Post)}
In /etc/CODESYSControl.cfg I only added: [SysCom] Linux.Devicefile=/dev/ttyS Is ok ? Now in Codesys I should have mapping like below : COM1 - ttyS0 COM2 - ttyS1 ?
Last updated: 2024-09-08

Post by dangjoris on raspistepper error after install ^{CODESYS Forge talk (Post)}
Ok with the new Release of SM3RaspiStepper 0.0.0.6 it is fixed. Everything works fine with CODESYS Control for Raspberry Pi SL 4.13.0.0 and CODESYS SDK 3.5.20.20
Last updated: 2024-09-30

Post by dangjoris on Missing function for ConfigGetParameterValueBool (SM3RaspiStepper) ^{CODESYS Forge talk (Post)}
Ok with the new Release of SM3RaspiStepper 0.0.0.6 it is fixed. Everything works fine with CODESYS Control for Raspberry Pi SL 4.13.0.0 and CODESYS SDK 3.5.20.20
Last updated: 2024-09-30

Post by albertocamina on Login problem with FileTransfer on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
Dear eschwellinger, sorry for the late repply. Just saw your answer nor. We are using: -CODESYS V3.5 SP19 Patch 2 -Compiler version - 3.5.19.20 -Visulaization Profile: 4.6.0.0 -CODESYS Control for Raspberry Pi 64 SL 4.12.0.0 All the best!
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I do not have error anymore using nic with eth0 value. But my network it still 172.17.0.3 like the first picture.
Last updated: 2024-10-23

Post by tmo21 on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Edwin, Thanks for your message. Edge controller Version: 4.4.0.0 based on 3.5.17.30 PLC version: Device Identification Name CODESYS Control for Raspberry Pi MC SL Vendor 3S - Smart Software Solutions GmbH Device type Softmotion3S Firmware version 4.4.0.0
Last updated: 2024-10-23

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Most likely your IP address is set to 172.... because you use a VPN connection to your device. Probably best to use the other Ethernet interface for your modbus communication.
Last updated: 2024-10-24

Post by shrikantp007 on help to get codesys understand ^{CODESYS Forge talk (Post)}
Hello , I need some help on how to start with , 1) how to get test license to test codesys , 2) how to take a configuration backup or running process back and post file on fourm so people can understand and deploy same file and get idea what is missing or configure wrong 3) where i can get pdf for codesys admin or programmer 4) what is hardware recommand ,i am running on windows guest on kvm server .is it ok ? 5) i am trying to get ardunio porject working ,using ardunio board as a modbus slave but its not working some how https://forge.codesys.com/forge/talk/Engineering/thread/bf832569b8/ Thanks in advance . shrikant pune -india
Last updated: 2024-07-22

Post by lraja on Codesys Programming with phyBOARD®-Pollux i.MX8M Plus ^{CODESYS Forge talk (Post)}
Dear All, I am trying to Developing a PLC using phyBOARD®-Pollux i.MX 8M Plus. It is very difficult to find the suitable Codesys control for i.MX8M. I have tried to install CODESYS Control for Linux ARM SL , but unable install it and I am getting the following error, [INFORMATION] Executing SSH command on root@192.168.0.10: Retrieving architecture from package management [ERROR] Expected exit value of command failed: expected 0, received 127 [INFORMATION] Standard output: sh: line 1: dpkg: command not found Kindly check and help phyBOARD®-Pollux i.MX 8M Plus Link : https://www.phytec.eu/en/produkte/single-board-computer/phyboard-pollux/
Last updated: 2023-09-23

Sort by relevance or date