Post by davidbo on *EXCEPTION* [ProsessorLoadWatchdog] codesys 3.5.11.40 ^{CODESYS Forge talk (Post)}
Under Application->"Task Configuration" you can find your task double click on that and you will see a fane to the right. You find the watchdog enable switch it off or increase the time
Last updated: 2025-11-17

Post by shivsrikakolum on Getting SMC_ERROR 34 SMC_AXIS_NOT_READY_FOR_MOTION, while the axis should be ready for motion ^{CODESYS Forge talk (Post)}
how did you manage to get rid of the error. i have set the cycle time to 2000 microsecond but my softaxis is still amber warning
Last updated: 2026-07-07

Post by ketanvaishnav on Redundancy Codesys Runtime, Synchronization ^{CODESYS Forge talk (Post)}
i am facing same data sync issue. i am use two 750-8212 (FW30) controllers. datas are sync from active to standby during changeover time, but datas are not sync from standby to active.
Last updated: 2026-01-30

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey Husarz, thanks for your Message, now i understand your Problem, also able to reproduce that. Pls. give me a Short Time to Check some stuff on this, i'll come back to this Topic with news ASAP. Greetings
Last updated: 2026-04-03

Post by mikek10 on Ethernet/IP 4.6.0 causing exceptions? ^{CODESYS Forge talk (Post)}
Hi, I have a project currently in development, it has a number of Ethernet/IP devices (18 adapter devices with Codesys as scanner, another scanner device with codesys as adapter). This has been stable whilst on factory floor for several months (though prior to that I did have some Ethernet/IP issues which were resolved by adjusting RPI rates). Today I tried updating to Ethernet /IP 4.6.0 from 4.5.1, subsequent to this I had 2 exceptions in a 2 hour period, I reverted to 4.5.1 and have had no further exceptions. Note I do have a device (Zebra printer) that frequently times out and reconnects, this does not seem to cause any issues in operation and does not cause any exceptions with 4.5.1. I believe the root cause of this is on the Zebra side, however there does not seem to be any adjustment I can make to prevent the time outs. Information from device log is in screenshot attached.
Last updated: 2024-06-27

Post by grant32 on RAMP_REAL FB is retaining my output value when i try to re use the FB ^{CODESYS Forge talk (Post)}
Hello, I'm relatively new to PLC programming. I am trying to creat a ramp down function, I have an example here of what I am using. I can get the function to work, the issue is that the OUT (variable3) value is being held by the FB so after I use it once it no longer works. In this example i set variable3 to 100 and the rest is as seen, over the course of a minute it ramped down to 10 (as desired). But when I deenergize TEST_START, set variable3 back to 100, and then re-energize TEST_START it immediately jumps back to the previously held value 10. The reset on this block just pauses the function and holds the last OUT. In my case I will need the function to start OUT at a set value, ramp down to the IN (variable2) value, and then accept a new OUT value to ramp down next time the block is energized. Hopefully this made sense, if anyone has any advice that would be awesome!
Last updated: 2024-07-29

Post by gmau on RS232 Communication in CODESYS Control RTE V3 ^{CODESYS Forge talk (Post)}
Hello, I would like to implement RS232 communication into CODESYS Control RTE V3. I was writing the program testing it on CODESYS Control Win V3, where it worked fine. When I changed it to RTE, the communication was on, but I cannot send the data between PLC and scale - there is no or little response from scale - mostly one time receive and that is it. On Win V3 it was working fine. I read that I am supposed to configure CODESYSControl file for a proper communication using RTE, but even after that I can not get a stable and working communication. I am attaching my CODESYSControl and CODESYSControlUser data below, as well as I am sending the code from communication function. The communication should be through COM1 port of PC. CODESYS Version: CODESYS V3.5 SP21 + (64-bit) Runtime + Version: CODESYS Control RTE V3 Version 3.5.21.0 / CODESYS Gateway V3 - x64 Version 2.5.21.0 I would be much gratefull for any help. Sincerely,
Last updated: 2025-07-16

Post by pernockham on AC Persistence - values are not read from file during start? ^{CODESYS Forge talk (Post)}
Im struggling with the AC Persistence. AC persistence seems to work for any variable that is changed online and values are kept during reboot. However, if I try to edit the persistence files offline or replace the persistence files with a previously downloaded older persistence file (with modified values), the online value will not follow, as if the system did not at all read the file at boot? My testing sequence. - Edit a the value of a persistenced variable (with xSaveOnChange = True) - Save/download the associated persistence file, (and confirm the value has changed). - Edit the value online for a second time . - Stop runtime - Replace (upload) the persistence file with my previously downloaded file . - Coldstart/Warmstart/Start runtime - Whatever Im trying the value of my persistence variable will always be equal to that of my second edit as if the file is not read/considered during boot. What am I doing wrong?
Last updated: 2025-09-02

Post by culius on JSON ^{CODESYS Forge talk (Post)}
Hey guys, I am trying to write a JSON. First time after login in PLC after download everthing works. But when I want to change values during runtime and try to recreate the JSON nothing happens. When forcing the xStart as an impulse i want to recreate it and see 2 as Key3 instead of 1 from the first run. Any Idea how to make this work? PROGRAM test VAR factory : JSON.JSONDataFactory; eDataFactoryError : JSON.FBF.ERROR; pJsonData : POINTER TO JSON.JSONData := factory.Create(eError => eDataFactoryError); fb_JBuilder : JSON.JSONBuilder; wsValue : WSTRING; diRootIndex, diObject1Index : DINT; iValue : INT; jsonArrayWriter : JSON.JSONByteArrayWriter; wsJsonData : WSTRING(1000); xFirst : BOOL := TRUE; END_VAR IF xFirst THEN fb_JBuilder(pJsonData := pJsonData, diRootObj => diRootIndex); wsValue := "Value1"; fb_JBuilder.SetKeyWithValue("Key1", wsValue, diParentIndex := diRootIndex); diObject1Index := fb_JBuilder.SetKeyWithObject("Key2", diParentIndex := diRootIndex); iValue := iValue + 1 ; // -----------!!! secound run should increment key3!!!!------------ fb_JBuilder.SetKeyWithValue("Key3", iValue, diParentIndex := diObject1Index); xFirst := FALSE; END_IF jsonArrayWriter(xExecute := TRUE, pwData := ADR(wsJsonData), udiSize := SIZEOF(wsJsonData), jsonData := pJsonData^, xAsyncMode := FALSE); Kind Regards
Last updated: 2024-04-30

Post by laazik2 on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
I am actually wondering as well if there are plans to fix it or not? As adding two modbus devices creates it's own problems with connection limits and other issues, which some slave devices have.
Last updated: 2023-09-05

Post by derpaul on Official MQTT-Client: MAX_RECEIVE_BUFFER_SIZE_EXCEEDED ^{CODESYS Forge talk (Post)}
Thank you very much so far - As I finaly decided to make an update on the PFC200 - as I've to get it up and running again. But something failed there and no I'm having an other Problem :-( I'll come back to this, when the error comes back!
Last updated: 2023-09-28

Post by runtimevictor on codesys VLAN tagging ^{CODESYS Forge talk (Post)}
Thank you very much for answering, I look forward to the example. As soon as the example or documentation is available, please let me know... thank you.
Last updated: 2024-09-10

Post by prakashkoladiya on CODESYS Gateway is not running ^{CODESYS Forge talk (Post)}
Suddenly CODESYS gateway has been stopped running as below picture so I’m not able to scan network PLC. I also tried to start CODESYS gateway service manually but its giving error as below. Have you faced this kind of problem before ??
Last updated: 2024-10-08

Post by kumareasu on Windows on ARM / Microsoft Surface ^{CODESYS Forge talk (Post)}
I too need this information. Is it possible to install CoDeSys runtime and convert a ARM system installed Windows IoT as OS and convert as PLC?
Last updated: 2024-11-16

Post by nz-dave on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
I have tried Achives but still get many errors. just now have tried to load a projectachive from last night and the visualization is [unknowen] as well as a action from the main pou.
Last updated: 2025-01-21

When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess) ^{CODESYS Forge talk (Thread)}
When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess)
Last updated: 2025-03-06

Post by ulvis on What is the CFC editor (page oriented) "Add page" keyboard shortcut? ^{CODESYS Forge talk (Post)}
But I do not want to do mouse dragging. I want a keyboard shortcut. OK, I may be a little peculiar, as any chart editor definitely requires a drawing tool as a mouse, trackball, pad or whatever....
Last updated: 2025-04-03

Post by open on How to create a stopwatch? ^{CODESYS Forge talk (Post)}
Thanks everyone for your input, I am using persistent variables to retain the timer value after machine shutdown, and main task to be as low as possible for the seconds TON to be accurate.
Last updated: 2023-12-14

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
Hello, I am trying to save my settings as a recipe on the Raspberry. As target path I use /user/Documents Save: SaveRecipeAS, 'Recipes', 'Recipe' Load: ReadRecipe, 'Recipes', 'Recipe' However, no recipe is created. What could be the reason?
Last updated: 2023-12-28

Is it possible to use debug functions such as Step Execution while the PLC ladder is in Running? ^{CODESYS Forge talk (Thread)}
Is it possible to use debug functions such as Step Execution while the PLC ladder is in Running?
Last updated: 2024-01-16

Post by dtamm on How to read string from CharBufferPtr? ^{CODESYS Forge talk (Post)}
Solved it! The simple answer was to declare a variable as POINTER TO STRING and assign the GetMessage result to that variable. Then, the ^ operator can be used to extract the message as string.
Last updated: 2024-02-21

Post by kislov on Remove white spaces in file .txt ^{CODESYS Forge talk (Post)}
Seems like you use SIZEOF as size, but you need to use LEN as size of data which you want to write.
Last updated: 2024-04-23

Post by hjohnson123 on PLC Memory consumption? ^{CODESYS Forge talk (Post)}
Hi, How can you access the <root> of the Linux system? I'm struggling with this as the code above results in an invalid handle, as it cannot access '/'.</root> I am using Control for Raspberry Pi for context. Thanks.
Last updated: 2024-06-05

Post by mp9876 on Problem using MeasureFrequence FB ^{CODESYS Forge talk (Post)}
Hi everyone, new at Codesys and PLC programming in general. I am using Codesys Win V3.5 SP20 I would like to measure an encoder's frequency output (obtaining that pulse train from Factory IO) and intended to use the MeasureFrequence FB (Intern/CAA/Utilities/CAA Mathematics/3.5.19.0). As mentioned in the title what I need to measure is low frequency, such as lower than 40hz (a cycle every 25mS) or so; I could even go lower frequency if required as this is for test purposes) therefore I am not expecting problem measuring a low frequency with that FB The library in question appears to be installed as I can retrieve it from the Library Repository. I can also see it from the Device's Library Manager. Problem arises when I am trying to instantiate this particular FB. I go like this: VAR MeasF:MeasureFrequence; END_VAR Please note that as soon as I start typing the "MeasureFrequence", the MeasureFrequence comes out as a viable option in auto-typing; seems to indicate that the FB is recognized somehow. But there is no way I can compile this as it comes back with the following: C0046: Identifier 'MeasureFrequence' not defined. Tried to rename that to ABC instead of MeasF; same issue. Possibly that the library is not properly installed ? Placeholder ? I would greatly appreciate a bit of guidance if possible. Thank you and regards, Mike
Last updated: 2024-06-24

Post by dandyk on Dynamic Images ^{CODESYS Forge talk (Post)}
Hello, I have very similar problem, but it seems that your solution does not work for me. I am using TwinCAT XAE Shell v3.1.4024.55 and TwinCAT Runtime. Sorry for writing here on codesys forge, but since I found the only relevant topic here and since TwinCAT is almost the same with CODESYS in many applications, I chose to write here. I simply need to dynamically update image in visualization based on camera trigger (I am doing a machine vision application). Camera triggers an image, my program processes it (applies thresholding, draws contours etc...) and saves the processed image in the runtime location (the same one you were mentioning). This was done successfully. I need to make it work at runtime, while the program is executing and I need to refresh the image in the visualization each time camera triggers a new image and program processes it. When I create image element in the visualization and define the bitmap ID variable as STRING which contains the image ID defined in the image pool, then it displays the image in the image pool, but does not work at runtime, while the program is executing. I also used the Bitmap Version. I declared it in Global variable list as integer with initial value of 0 and wrote the variable in the bitmap version in the image element in visualization. Each time new image is saved to the runtime location, I wrote a program to increment Bitmap Version by 1. It increments and the image does not update in the visualization, unfortunately. I think that bitmap version is working correctly and deletes the cached image as it is supposed to, but the Image Pool does not update the image ID with the new image... the path to the image is always the same... only the actual image changes with the same file name. Image Pool is not dynamic and cannot refresh the image in the path to the actual one at runtime. How can I refresh the image ID in the image pool at runtime? Bitmap version only deletes cached image and reloads the image from the image ID, but the image ID has the same image, because image pool won't update at runtime. Do you know any solution to this problem?
Last updated: 2024-04-06

Sort by relevance or date