Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey, I also waiting for feedback from Mr. Schwellinger @eschwellinger, please send me an answer, i would appreciate it. The clue is, i know the solution, but have to check if it's allowed to share.
Last updated: 2026-04-14

Post by nz-dave on sysfile- transfer file to pc ^{CODESYS Forge talk (Post)}
Hi Trying to send csv file to c:\data\xxx.csv Im able to save to plclogic and after doing this https://forge.codesys.com/forge/talk/Runtime/thread/5cac1390b4/ i can now "file transfer" to host pc downloads. but still cant transfer to c:\ im sure i have done this in the past with older versions of the 3.5 ide? just concat the file name as c:\data\My_Filename.csv. any ideas? cheers
Last updated: 2025-04-23

Post by tomast on Codesys and Siemens SINAMICS 20 modbus RTU "Response CRC Fail" ^{CODESYS Forge talk (Post)}
Hi everyone, I'm currently working on a project involving the control of 5 VFDs via Modbus RTU, this time using the WAGO 750-8212 CPU. So far, I've managed to make progress, but I've encountered an issue. While I can successfully read and write to all the registers I need, I consistently encounter a "Response CRC Fail" error when attempting to write the value 1151 to the STW register at address 40100. I'm able to set the frequency via register 40101 and adjust all other parameters using different registers. Setting STW to 1150 results in the drive ready boolean from the ZSW-bit being received instantly. However, the moment I attempt to send 1151 to register 40100, I immediately receive the "Response CRC Fail" error for all channels. I've also attempted to use combined control, employing Modbus for frequency control and starting from a digital input. Everything seems to function properly until I send the start command to the VFD. Interestingly, I consistently encounter the same error the moment I send the start command, regardless of whether I use register 40006 (high) or 40100 (1151). Could someone please assist me in resolving this issue?
Last updated: 2024-03-21

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Thank you for your quick response, I have updated to the 4.17.0 (Virtual control and the license server). Now I am able to see the softcontainer from the Codesys IDE. But when I want to activate the license I get the following message: Licensing info not available. The device does not support this service (See picture). I then tried to active it via the WBM service like you suggested. But when I try this is get an error (see picture for error). I also tried to put RTS- in front of the serial number, but when I try this I get an error that the serial number is not correct. I think I'm getting closer, but I'm not there yet.
Last updated: 2025-10-01

Post by timvh on CAN Open Manager - varible of SYNC ^{CODESYS Forge talk (Post)}
You can enable "Sync Producing" in the configuration of the CANopen Manager. Then this manager will send a SYNC message every interval you set. Depending on your PDO configuration, the CAN nodes can send a PDO on every Sync (cyclic-synchronous). If this is not possible, then as alternative you can send a low level CAN message with COB-ID 16#80.
Last updated: 2024-11-05

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
will send out vplc preliminary version...!
Last updated: 2024-03-21

Post by peterned on Array to String ^{CODESYS Forge talk (Post)}
max. string length in Codesys is 255 chars. It's not possible to cram 20,000 things in a string. If you need to send the data to another device, send the whole data[] array (as byte array, without doing anything to it) and extract the information on the other end. As each struct member has a fixed size (81 bytes, as per you declaration), this will be easy. To save some resources, consider declaring string lengths - e.g. if the max possible length for key is 10 chars, declare it key: STRING(10); and it will occupy 11 bytes instead of 81
Last updated: 2024-07-20

Post by respl on IFM EXOR Network variable Error ^{CODESYS Forge talk (Post)}
We are connected IFM CR711S to Exor EX710. We are exchanging data using network variables. Both devices are configured on same project so no need to use file source. When tested application it works fine. But after 3 months same application not working. We are able to send data from CR711 to EX710 but data from Ex710 to CR711s works only for one scan when we cold reset CR 711S. Can somebody help to find out error.
Last updated: 2025-03-17

Post by nano on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
i know, this is the reason for us either. PLC-Handler is to big, and only available with additional Contracts/Costs. OPC-UA is to slow for us. As described, there is a solution available, but im not allowed to post them here. i would prefer you send a message at codesys store by "have a question" or similar called. Not sure. Or, if an Codesys-Official Member allows to share that informations, i can give you the right hints.
Last updated: 2024-06-15

Post by daqe102 on HTTP CLIENT (MAX SIZE) ^{CODESYS Forge talk (Post)}
Hi everybody I'm Paul and I need your knowledge, I am trying to send a huge Json (about 60,000 characters) through http client FB from codesys, however I saw that Maximum size of the http request in btyes are 16000, So, is there any way to resolve this situation? is it posible or there's a another opction to do it?
Last updated: 2024-08-21

Post by eschwellinger on RS485 CAN HAT to Cosesys ^{CODESYS Forge talk (Post)}
Hi if you add in (ttyAMA0 should fit to your HAT's device [SysCom] Linux.Devicefile.1=/dev/ttyAMA0 to /etc/CODESYSControl_Usr.cfg since 4.12.0.0 version /etc/codesyscontrol/CODESYSControl_Usr.cfg then access in CODESYS with Com1 should do it. Keep in mind that only adapters work (for RS485) which do determine the send/receive direction in hardware
Last updated: 2024-10-28

Post by alexgooi on How to protect library project? ^{CODESYS Forge talk (Post)}
Hi aniket-b, If you save the library as a compiled library you are not able to see the source code. When the end user tries to view inside the object, CODESYS will give a notification that the source code is missing, see attachment. In short if you don't send the source code, it will not show.
Last updated: 2024-01-25

Struggling to connect to EK1100 to Raspberry Pi ^{CODESYS Forge talk (Thread)}
Struggling to connect to EK1100 to Raspberry Pi
Last updated: 2025-03-30

Post by otdeveloper on IEC 61499 ^{CODESYS Forge talk (Post)}
It is being worked on by many companies and its even-driven function blocks seem like a natural evolution of the object oriented industrial programming I have seen Gary Pratt (author of the Book of CODESYS and much more) so expertly implement and explain. I would expect CODESYS to have this front and center on their sights and, if they do not, I would be very interested in learning why.
Last updated: 2024-02-09

Post by m83coding on Raspberry Pi Codesys SPI Master ^{CODESYS Forge talk (Post)}
Hello, I am trying to control shift registers 74HC596 and 74HC165 via Raspberry PI with SPI interface. So far I did it with a Microcontroller and now I wanna upgrade my Projekt with Raspberry Pi and Codesys Software to be more flexible. I tried to adapt PiFace Function Block to just send or recive a 8 bit via SPI interface of the my Raspberry Pi. With following code (see attached screenshots) * PLC_PRG * PiFaceDigital * PiFaceDigital.write8 * PiFaceDigital.read8 I have a signal at SCK and MOSI pin of the PI, so far so good. But I really struggle with the unterstanding of the code. Is there some detailed description of each line of code? Or is there somebody in the community who can explain each line of code? Or is there a more simple way to send / recive 8 bit via SPI? Manuel
Last updated: 2024-04-23

Post by c3po on Wago PLC Disable Device Login ^{CODESYS Forge talk (Post)}
is there also a possibility to deactivate the login screen from the Hmi if you transfered a new project? I send the screen as attachment:
Last updated: 2024-10-09

Post by timvh on Wago PFC200 Ethernet / IoDrvEthernet Issue? ^{CODESYS Forge talk (Post)}
Could you send a screenshot of the Ethernet "General" settings? In that screen you can also search for the Ethernet interface you would like to use for your communication. Did you do that? Did you change any settings manually in the CODESYSControl_user.cfg?
Last updated: 2025-01-22

Post by mickael on stepper motor + Raspberry pi 5 + Codesys ^{CODESYS Forge talk (Post)}
Hello, I can't figure out how to configure the DIR and STEP pins of the GPIO for an SM_Drive_RaspiStepper_Pulsdir axis. Can you send me a scan? Also, does the MC_POWER status always remain False? Thanks.
Last updated: 2025-07-06

Post by mickael on Motor stepper raspberry pi 5 Codesys ^{CODESYS Forge talk (Post)}
Hello, I can't figure out how to configure the DIR and STEP pins of the GPIO for an SM_Drive_RaspiStepper_Pulsdir axis. Can you send me a scan? Also, does the MC_POWER status always remain False? Thanks.
Last updated: 2025-07-06

Post by reinier-geers on Missing Font ^{CODESYS Forge talk (Post)}
Tim. I tried that. After that i used version 19. No problems. After that the Manufacturer whants me to pay for support. I dont pay for there incompetance. So send everythink back. Now looking for a better one.
Last updated: 2024-02-29

Post by mandeepahujaifm on IFM CR711S Version Mismatch ^{CODESYS Forge talk (Post)}
Please send an email to info.us@ifm.com and they shall provide you with the correct information. Alternatively you can check the website for latest packages. https://www.ifm.com/us/en/product/CR711S?tab=documents
Last updated: 2024-03-05

Post by thewizard8 on Raspberry PI4 Serial Port ^{CODESYS Forge talk (Post)}
Hi thanks once again, Yes it supports because using python scripting I'm able to send data from the rasberry raspberry and receive it on my pc and vice versa (Image attached). But when using the CoDeSyS I just got red flags. Any light on this problem?
Last updated: 2024-03-19

Post by calviniscoding on JSON ^{CODESYS Forge talk (Post)}
Can you post the new code that you have by chance? Also, are you able to send the values of tags dynamically with the RTAC in this JSON format? I'm running into a lot of road blocks with it.
Last updated: 2024-06-21

Post by calviniscoding on JSON ^{CODESYS Forge talk (Post)}
Can you post the new code that you have by chance? Also, are you able to send the values of tags dynamically with the RTAC in this JSON format? I'm running into a lot of road blocks with it.
Last updated: 2024-06-21

Post by calviniscoding on JSON ^{CODESYS Forge talk (Post)}
Can you post the new code that you have by chance? Also, are you able to send the values of tags dynamically with the RTAC in this JSON format? I'm running into a lot of road blocks with it.
Last updated: 2024-06-21

Sort by relevance or date