Codesys runtime serial number for RaspberryPi SL ^{CODESYS Forge talk (Thread)}
Codesys runtime serial number for RaspberryPi SL
Last updated: 2020-04-08

CODESYS Control for Raspberry Pi MC SL ^{CODESYS Forge talk (Thread)}
CODESYS Control for Raspberry Pi MC SL
Last updated: 2018-12-19

Can hostname be used for an OPC UA Codesys server? ^{CODESYS Forge talk (Thread)}
Can hostname be used for an OPC UA Codesys server?
Last updated: 2022-01-06

CODESYS Control for Linux SL on virtual machine? ^{CODESYS Forge talk (Thread)}
CODESYS Control for Linux SL on virtual machine?
Last updated: 2024-01-08

Minimum system requirements for codesys control standard S ^{CODESYS Forge talk (Thread)}
Minimum system requirements for codesys control standard S
Last updated: 2024-01-14

Is a Reset possible for the CoDeSys soft PLC? ^{CODESYS Forge talk (Thread)}
Is a Reset possible for the CoDeSys soft PLC?
Last updated: 2024-01-18

Does CODESYS use its own native driver for I2c? ^{CODESYS Forge talk (Thread)}
Does CODESYS use its own native driver for I2c?
Last updated: 2024-02-13

CODESYS Edge Gateway for Linux on embedded distribution ^{CODESYS Forge talk (Thread)}
CODESYS Edge Gateway for Linux on embedded distribution
Last updated: 2024-04-17

CODESYS control for Raspberry Pi 64 SL errors ^{CODESYS Forge talk (Thread)}
CODESYS control for Raspberry Pi 64 SL errors
Last updated: 2024-05-03

Ethercat bus on Beckhoff CX with Codesys for Linux ^{CODESYS Forge talk (Thread)}
Ethercat bus on Beckhoff CX with Codesys for Linux
Last updated: 2024-05-13

Post by timvh on IFM CR711S Version Mismatch ^{CODESYS Forge talk (Post)}
You should ask IFM to provide you with the correct version of their controller packages. Then after you have installed this, you can select the correct version of the controller by right clicking on it in the device tree, update device, enable the option "Display all versions" and then select the version which matches your controller. Alternatively you can ask IFM to provide an update package which can update the runtime version on your controller to 3.2.0.0.
Last updated: 2024-03-05

Post by kbucsit22 on Ethercat Slave - Load PDO From Device ^{CODESYS Forge talk (Post)}
Hi All, I am using Control Win V3 x64. Anyone experiences to use Expert mode to map the Ethercat Slave device to press this Load PDO from Device, Pressed first time then nothing happens. Pressed second time then the software crashes. Best regards, Kenneth
Last updated: 2024-10-22

Post by ph0010421 on Dynamically enabling/disabling Modbus slave devices in runtime (performance issue with timeouts) ^{CODESYS Forge talk (Post)}
Hello If you uncheck 'Auto restart Communication', it will try once and never again. You can manually reset the slave if needed : Slave.xReset (or something similar) Or I have a ModbusRTU library if you want to try it.
Last updated: 2025-08-12

Post by timvh on when going online, stuck on "Syncing file "visuelemsdatetime.tl_datetime.txt" ^{CODESYS Forge talk (Post)}
I don't know the root cause... But what could help to continue when it seems to hang, is stop the CODESYS (communication) Gateway. Go to the Windows SysTray, find the icon for the Gateway and then stop it and start it again. This will interrupt the connection between CODESYS and your controller.
Last updated: 2024-03-05

Post by srouse on PFC200BUS not running ^{CODESYS Forge talk (Post)}
I started a project in codesys for a WAGO 750-8212 PLC and I am working on getting online with the controller. I can log in to the controller and I can see and control all of the fieldbus couplers that I have. I am unable to get the internal bus working. It just says that the bus is not running and when I scan or devices nothing shows up. Am I missing something important in my device tree?
Last updated: 2024-07-10

Post by simotion on Variable indicating axis pending gearing or camming ^{CODESYS Forge talk (Post)}
Is there a variable indicating that a gearing or camming operation is pending? For instance MC_Gearin has beeen triggered, but starting point of master axis to start the sychronisation movement is not reached yet, so the slave axis is just waiting for this. I should be able to differ between a pending and active gearing or camming
Last updated: 2023-11-28

Post by ahuckphin on Issues with Modbus Slave with Raspberry Pi ^{CODESYS Forge talk (Post)}
codesyscontrol_user.cfg [SysCom] Linux.Devicefile.1 = /dev/ttyUSB0 portnum:=COM.SysCom.SYS_COMPORT1; **parameters are used in the python-script ** method: "rtu" port: "COM8" baudrate: 9600 stopbits: 1 bytesize: 8 parity: 'N' timeout: 1 register address for humidity: 0x000 register address for temperature: 0x001 unit ID: 1 **parameteized in the modbus-master-comport ** see attached files
Last updated: 2024-07-11

Post by naks on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hi everyone, I was able to change the IP address of my Controller (wago 750-8212), but when i restart my Controller then the IP address resets to the original, are there any other settings i need to implement?
Last updated: 2024-07-08

I create python script Upload my script online to controller each time I get the password dialog ^{CODESYS Forge talk (Thread)}
I create python script Upload my script online to controller each time I get the password dialog
Last updated: 2020-09-25

Post by reinier-geers on Compile error ^{CODESYS Forge talk (Post)}
I know, But controller is Version 18.4. So i cant set to 19. I can try version 19. But will it run if i set the controller to 18.4
Last updated: 2024-02-26

Post by tokamk on Dynamic setting of the modbus tcp/ip slave ip address ^{CODESYS Forge talk (Post)}
Hello, I'm working on a project which includes Panel-PC which communicates with a PLC through Modbus TCP/IP. On the PLC I have a CODESYS code which has Modbus slave objects. The Modbus slave objects have to have manually set IP address in order for them to work properly and the Ip address has to be the PC-Panels's IP. This project is going to a customer and they're using their own IP address realm. So, my question is that is it possible to configure these slaves in some other way, so that the customer doesn't need to modify the CODESYS project? I was thinking that would it be possible to set the IP address of these slaves from external source?
Last updated: 2024-02-15

Post by s1ack on Wago PFC200 Ethernet / IoDrvEthernet Issue? ^{CODESYS Forge talk (Post)}
I changed the interfaces to br0 & br1 as they are designated on the Wago PFC200. That issue is resoved. However, on site I have very high system cpu usage, system as in Linux. Presently it is not known why - my bench system does not exhibit such high system usage. In the past this was due to IGMP network traffic every 250uSec from synchronized inverters.
Last updated: 2025-01-22

Post by s1ack on Wago PFC200 Ethernet / IoDrvEthernet Issue? ^{CODESYS Forge talk (Post)}
It's suspected that the CPU loading is the Linux Kernal in the Wago PFC200 dealing with IGMP multicast traffic (@ 250 uSec) from inverters on site. The inverters use the ethernet network and IGMP to synchronize, the customer removed the switch that shipped with the system, and thus removed IGMP Snooping that was plug-and-play within the provided switch.
Last updated: 2025-01-24

Post by akrawczyk on Dynamically enabling/disabling Modbus slave devices in runtime (performance issue with timeouts) ^{CODESYS Forge talk (Post)}
Hi everyone, I'm working on a CODESYS-based project running on a Weintek cMT2078X HMI with a built-in CODESYS runtime. The system communicates with multiple Modbus RTU slave devices, arranged in a cascade. The number of connected units can vary between 2 and 8, depending on the installation. Each slave has 17 Modbus channels, which are polled cyclically every 5 seconds. The issue is that when fewer devices are physically connected (e.g. only 3 out of 8), the Modbus master still attempts to communicate with all configured slaves. This leads to massive delays due to timeouts (currently 200ms per channel). For one disconnected device, that’s: 17 × 200ms = 3.4 seconds of delay per polling cycle, and this quickly multiplies with each additional missing slave. This behavior significantly degrades the system's performance and responsiveness. We attempted a workaround where we tried to trigger polling based on a variable in the PLC program, but this caused instability and even led to hardware hangs/freezes on the cMT2078X – likely due to clashes in how the Modbus polling engine and program logic interact at runtime. My main questions are: Is there a way in CODESYS to dynamically enable/disable Modbus slave devices at runtime, using a BOOL or INT variable (e.g. indicating number of active slaves)? Can devices or channels be conditionally polled or temporarily disabled without removing them from the device tree? Are there any best practices or examples for handling variable numbers of Modbus slaves in scalable systems like this? Would splitting communication across tasks or interfaces help reduce the impact of timeouts? Any advice, documentation references, or architectural suggestions would be extremely helpful. I'm looking for a robust way to dynamically scale slave polling without degrading system stability or performance. Thanks in advance!
Last updated: 2025-08-11

Post by mwandy on Codesys Project Protection ^{CODESYS Forge talk (Post)}
I'm having trouble finding clear answers on this. I'm looking for a way to make a Codesys project password protected so that if the project is distributed it can be used to log into a controller to view and debug logic. At this same time I want to prevent the project from being saved as well as edits being downloaded to the controller. Basically I want to make a whole project view-only. What is the beat way to achieve this? I have had minor success with access rights, which solves the problem with trying to login if the project doesn't match what is in the controller. However with this solution, edits can still be made and saved, possibly corrupting the core project, preventing future logins. Any suggestions?
Last updated: 2024-03-29

Sort by relevance or date