Post by trycyclepower on EtherCAT drive going into fault mode require power cycle everytime ^{CODESYS Forge talk (Post)}
I have EtherCAT servo drive lost communication with PLC everytime it gets faulted, it does not not communicate until I power cycle everything again, how to solve this issue?
Last updated: 2024-09-11

Post by prakashkoladiya on CODESYS Gateway is not running ^{CODESYS Forge talk (Post)}
Suddenly CODESYS gateway has been stopped running as below picture so I’m not able to scan network PLC. I also tried to start CODESYS gateway service manually but its giving error as below. Have you faced this kind of problem before ??
Last updated: 2024-10-08

Post by reinier-geers on Ethercat not running. ^{CODESYS Forge talk (Post)}
I change a running programm but now ethercat is not running. all users are there. Why is it always problems with codesys/ Diadesigner. i see also a Crist ? Why ther is only one master
Last updated: 2024-10-16

Post by lsislsis on Alarm Table rows font size not change ^{CODESYS Forge talk (Post)}
When we try to change the font size of alarm table headers change as excpected but timestamps and messages not change and keep one small size from the begining. Is there any solution for that? Regards
Last updated: 2024-10-23

Post by pernockham on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
Also. Every third (or so) attempt to login/compile is unsuccessful with the error prompt "one or more errors occurred", however there is no information available on what this error might be. If I remove the PersistenceManager-module, these problems are not present.
Last updated: 2024-11-01

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I tested your project but with same results i am still not seeing analog values. I also included the library list, the mainprogram.
Last updated: 2024-11-08

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
your driver is not running. All libraries must be present first! Then you can try the following. Delete the ADS1115 and the I2C_maseter from the device tree. Create everything again.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I also installed your codesys version with the codesys for raspberry pi package version 4.7.0. but with no succes, only the TCA multiplexer has a constant green turning circle, the ADS1115 still changing from running to not running.
Last updated: 2024-11-11

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Don't I need a browser on the device for web depot? Could work on the Pi but not the Wago controller. Maximum I have is SSH.
Last updated: 2025-01-08

Post by yannickasselin on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Not sure this will help you but I had the same issue and was able to activate the license on a Windows PC using the Web Depot in a web browser. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_installing_license.html
Last updated: 2025-01-08

Post by winki on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
Thx for your help, I just Uninstall and install again codesys. I did it as admnistrator and now it is working... I did not change anything into the target configuration. Only my codesys on my computer. Loic,
Last updated: 2025-01-10

Post by winki on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
Thx for your help, I just Uninstall and install again codesys. I did it as admnistrator and now it is working... I did not change anything into the target configuration. Only my codesys on my computer. Loic,
Last updated: 2025-01-10

Post by liai on an not create Symbol Configuration in Codesys V3.5 SP20 Patch 4 ^{CODESYS Forge talk (Post)}
Just can not create Symbol Configuration in Codesys V3.5 SP20 Patch 4.Showed in the picture. The same PLC works well in SP19. If it lack of some setting in SP20 ?Thanks a lot.
Last updated: 2025-03-08

Post by timvh on library is not available ^{CODESYS Forge talk (Post)}
Which PLC do you use? If it is a standard CODESYS Runtime (from the store), then maybe update the device in your project to the latest version. If it is not a standard CODESYS Runtime, then maybe contact the supplier.
Last updated: 2025-03-25

Post by aeem on CODESYS Installer does't open ^{CODESYS Forge talk (Post)}
Hello, I'm new to CODESYS just downloaded and installed latest version 3.5.21.00. I want to try and play around with Raspberry pi but Installer does not open. I'm not getting errors or any warnings it's just won't start. Any ideas how I can fix this?
Last updated: 2025-03-31

Post by avenue68 on REFERENCE TO in an array ^{CODESYS Forge talk (Post)}
That's because the array only contains structures themselves, not references. It doesn't matter that what consists of each struectures unless they are not pointers.
Last updated: 2025-05-21

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Sort by relevance or date