Post by karel-bas on Loosing connection to emulation running on Linux ^{CODESYS Forge talk (Post)}
Ok. I ran the vm twice until it failed and from log it seems like my OPC UA fails becouse I am not able to get HTTPs certificate ? I dont really see any other reason.
Last updated: 2024-09-20

Post by fmbrew-rob on Licensing info not available. ^{CODESYS Forge talk (Post)}
Was there ever any resolution to this? I am using Virtual Control SL on a ProxMox setup, and I can't get the license installed. I get the same errors reported above.
Last updated: 2024-09-21

Post by davidbo on RPI can system operation like rm in a shell have an impact on a Task cycle time ^{CODESYS Forge talk (Post)}
3.5 18 SP2 I think the control is 4.2.0.0. I am not in the office before on Wednesday.
Last updated: 2024-09-23

Post by fmbrew-rob on Licensing info not available. ^{CODESYS Forge talk (Post)}
I do have a license server installed. Can you point to a document or ANYTHING that shows how to configure this virtual control to properly do licensing?
Last updated: 2024-09-24

Post by rmaas on CSV file and string manipulation. ^{CODESYS Forge talk (Post)}
the $N stands for newline and $R stands for line break. maybe these combinations are considered as 1 character/position? Not sure, just a thought... see also: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operands_constant_string.html#:~:text=A%20string%20constant%20is%20a,belong%20to%20this%20character%20set.
Last updated: 2024-09-27

Post by timvh on Newly created texlists wont appear in the selection dropdown ^{CODESYS Forge talk (Post)}
Only idea I have is that new textlists are not loaded with an online change. When you add them, maybe you always have to do a full download first.
Last updated: 2024-09-28

Post by salvadegianluca on Eoe issues with Windows and Linux ^{CODESYS Forge talk (Post)}
Is there any way to have EoE working with Tap names different from tap0? My PLC manufacturer uses Tap0 for the remote assistance service and it's not avvailable for other uses.
Last updated: 2024-10-07

Post by malie on Visuutils FbOpenDialog(Extended) not open Dialog from POUs ^{CODESYS Forge talk (Post)}
Hello, thanks for the answer, that helped a little. How to achieve this behavior automatically when importing from a library, there can be a lot of dialogs from different librarys?
Last updated: 2024-10-08

Post by i-campbell on What is this ST syntax? ^{CODESYS Forge talk (Post)}
https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_st_comment.html it is a comment. I guess it used to be NOT _somevariable and someone want it to always be true.
Last updated: 2024-10-12

Post by hanpekel on Reading request counter value from modbus server in application ^{CODESYS Forge talk (Post)}
Any way I can read the value of the 'request counter' (see screenshot) in my application. Amount of client connections is easily found using ModbusTCP_Slave_Device.uiClientConnections; But for request counter it does not seem to be that simple.
Last updated: 2024-10-16

Post by dekr on Visu User Management Dialog - Add user does not work ^{CODESYS Forge talk (Post)}
After the user data has been entered, the page symbol at the top left must be pressed before OK is pressed.
Last updated: 2024-10-18

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Update : The solution I mentionned in a previous post does not always work. Some Raspberry Pi CM4 still won't create the license container. I will open a support ticket.
Last updated: 2024-10-18

Post by jepl-1012 on configuration error for SM_Drive_GenericDSP402 ^{CODESYS Forge talk (Post)}
Hi All, I Am using Delta AX8 Controller And IndrDrive HCS01 With Ethercat COE (Cia402 Profile) .Communication has done properly but while i made MC_Power block on its not get enable. what is the issue can any one help me
Last updated: 2024-10-21

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
if this does not work, you could install the 3.5.20.0 Gateway from the CODESYS Store. https://store.codesys.com/de/codesys-edge-gateway-for-windows.html then it is possible to enable it by righclick inthr task tray
Last updated: 2024-10-21

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I do not have error anymore using nic with eth0 value. But my network it still 172.17.0.3 like the first picture.
Last updated: 2024-10-23

Post by eschwellinger on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
..strange just switching of this device without graceful Linux OS shutdown? Reset orgin on the device tree and a new download of the application will bring it up and running again but sure then the persistent data are for sure lost.
Last updated: 2024-11-02

Post by timvh on Case Function - Multiple Conditions, Is it possible? ^{CODESYS Forge talk (Post)}
This is not possible. Possible solution could be: CASE var1 OF 10: CASE var2 OF 10:; 20:; END_CASE 20: CASE var2 OF 10:; 20:; END_CASE ELSE ; END_CASE
Last updated: 2024-11-05

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
take a look here. there is a working driver in the collection https://forge.codesys.com/forge/talk/Deutsch/thread/87bfe42cbb/?limit=25#514f
Last updated: 2024-11-07

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
thank you, i tried your library and device description but i don't get analog values. Do i something wrong? i also got an library error at the I2C_BASE functionblock the calcCycleTime gave an variable size error, so i added thet conversion from ULINT_TO_UDINT.
Last updated: 2024-11-07

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
We use a Compute module 4 it's 64bit based, so i cannot change it to sl.what are the possibilities to get the i2c working?
Last updated: 2024-11-09

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
This is the operating system and has nothing to do with the runtime. Unless you use 64bit commands. You can see for yourself that you have errors with 64bit compilers
Last updated: 2024-11-09

Post by struccc on Checking or changing objects dimensions using code. ^{CODESYS Forge talk (Post)}
That time it was not answered. But yes, it is possible. Search for "Relative movement" properties of the rectangle element. Might need to enable advanced features in the property browser. https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_rectangle.html
Last updated: 2024-11-19

Post by hfelek on More information on Device address [0058.A0DE] ^{CODESYS Forge talk (Post)}
Hi, Isn't there really a logic to get device address regarding router and IP setups? I'm trying be sure on whether I connect to the right device or not without 'wink' capability on the device.
Last updated: 2024-11-21

Post by zatalian on Beckhoff EL7037 softmotion ^{CODESYS Forge talk (Post)}
The SM3_Drive_ETC_Beckhoff_EL70xx library has descriptors for the EL7031, EL7041 and EL7047 but not the EL7037? Is there another library that has the one I need?
Last updated: 2024-11-26

Post by tk096 on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hi, can you share a project to reproduce the issue? I wasn't able to reproduce it following these steps.
Last updated: 2024-12-19

Sort by relevance or date