How can you Toggle a Function BOOL input from a different POU? ^{CODESYS Forge talk (Thread)}
How can you Toggle a Function BOOL input from a different POU?
Last updated: 2021-08-01

Is there a way to assign NaN (i.e., Not a Number) ^{CODESYS Forge talk (Thread)}
Is there a way to assign NaN (i.e., Not a Number)
Last updated: 2019-08-15

Running more controllers in tandem on a single devbox (or a single networked resource) ^{CODESYS Forge talk (Thread)}
Running more controllers in tandem on a single devbox (or a single networked resource)
Last updated: 2017-04-22

How to retrieve a runtime license installed twice within a single computer ? ^{CODESYS Forge talk (Thread)}
How to retrieve a runtime license installed twice within a single computer ?
Last updated: 2020-04-20

Is it possible for a byte to have a negative sign? ^{CODESYS Forge talk (Thread)}
Is it possible for a byte to have a negative sign?
Last updated: 2019-10-31

Cant assign a remote device as an input to a function block ^{CODESYS Forge talk (Thread)}
Cant assign a remote device as an input to a function block
Last updated: 2023-03-23

Is it possible to convert a string of 32-bit of binary to a float32? ^{CODESYS Forge talk (Thread)}
Is it possible to convert a string of 32-bit of binary to a float32?
Last updated: 2023-03-23

Can't figure out how to "save" a value of a variable ^{CODESYS Forge talk (Thread)}
Can't figure out how to "save" a value of a variable
Last updated: 2017-02-19

CmpIecVarAccess to get name of a type, not of a variable (instance) ^{CODESYS Forge talk (Thread)}
CmpIecVarAccess to get name of a type, not of a variable (instance)
Last updated: 2016-06-08

Cannot pass array of constant size to a function as a reference ^{CODESYS Forge talk (Thread)}
Cannot pass array of constant size to a function as a reference
Last updated: 2024-01-09

I want to convert a WORD to a hex string like 15.432 to '3C48' ^{CODESYS Forge talk (Thread)}
I want to convert a WORD to a hex string like 15.432 to '3C48'
Last updated: 2024-04-19

call of a method of a function block in another program ^{CODESYS Forge talk (Thread)}
call of a method of a function block in another program
Last updated: 2024-06-03

call of a method of a function block in another program ^{CODESYS Forge talk (Thread)}
call of a method of a function block in another program
Last updated: 2024-06-03

Assigning Modbus addresses to a structure in a dynamic way ^{CODESYS Forge talk (Thread)}
Assigning Modbus addresses to a structure in a dynamic way
Last updated: 2025-10-21

How can adding a colored leather vest upgrade a simple outfit? ^{CODESYS Forge talk (Thread)}
How can adding a colored leather vest upgrade a simple outfit?
Last updated: 2025-12-15

Post by pra83 on CODESYS SoftRedundancy — Both PLCs stay standalone after network interruption — Auto recovery not working ^{CODESYS Forge talk (Post)}
Hello, We are facing a critical issue with CODESYS SoftRedundancy that we have been unable to resolve despite extensive troubleshooting. HARDWARE: 2× HP EliteDesk 800 G9 SFF Intel Core i7-14700 (20 cores) 16GB RAM, 512GB NVMe SSD Windows 11 IoT Enterprise LTSC 2024 NIC1: Built-in Intel GbE NIC2: Intel I210-T1 PCIe (NIC team) SOFTWARE: CODESYS Control Win V3 - x64 Version 3.5.22.10 CODESYS SoftRedundancy SL Server 1 IP: 172.10.10.101 (PLC1 — Active) Server 2 IP: 172.10.10.102 (PLC2 — Standby) CURRENT CODESYSControl.cfg: [CmpRedundancy] BootupWaitTime=120000 StandbyWaitTime=12100 SynchronousTimeout=12100 [CmpSchedule] ProcessorLoad.Maximum=80 WatchdogTime=12000 WatchdogTimeoutAction=0 CONFIRMED WORKING: PLC1/PLC2 identification configured via IDE Connection IP configured via IDE AutoSync enabled and written via IDE Normal Active/Standby operation working Server 2 auto-promotes when Server 1 completely fails PROBLEM DESCRIPTION: When NIC1 cable is removed from Server 1 — both servers go to standalone mode. When NIC1 cable is reconnected — both servers remain in standalone indefinitely. Neither server auto-recovers to Active/Standby without manual CODESYS service restart. AutoSync fires (!!! Autosync !!! visible in log) but recovery does not complete. Tested with direct cable (no NIC team) — same result. Confirmed not a hardware or NIC teaming issue. KEY LOG MESSAGES: "Timeout: No sync message RMSG_StartCycle (5) from master: Standalone" "Socket on other side closed gracefully 0" "Standby PLC: Open acyclic work socket failed" "Connection broke after 11806ms. Check BootupWaitTime." Autosync(fires but does not complete recovery) PCAP ANALYSIS (Wireshark): CODESYS sync stops completely at T+3s Server 1 sends TCP FIN on ports 1206 and 1208 at T+5s No CODESYS redundancy traffic for remaining 24 seconds Both servers stay standalone indefinitely WHAT WE HAVE TRIED: StandbyWaitTime = 12100ms SynchronousTimeout = 12100ms WatchdogTime = 12000ms (less than StandbyWaitTime) AutoSync enabled NIC2 set as Standby adapter Disabled Windows Network Discovery Direct cable test — rules out NIC hardware QUESTION: Per official CODESYS documentation: "No automatic Reconnect is included in the functional scope of the redundancy components. You can program the triggering of a reconnect." Is RDCY.Synchronize() the correct function to add to our application for automatic recovery after both PLCs go standalone? What is preventing auto-recovery when AutoSync is enabled and PlcIdent is correctly set? Thank you for your support.
Last updated: 2026-05-02

Post by davidbo on How to switch between dynamic IP address and dynamic? ^{CODESYS Forge talk (Post)}
I want to make an application with a UI for CODESYS Control for Raspberry Pi MC SL which make it possible to switch between dynamin and fixed IP address and to set the IP address. However I do not know whether that is possible?
Last updated: 2023-11-06

Post by bjohnson on Failed to instantiate the frame window error ^{CODESYS Forge talk (Post)}
IT updated a group policy that caused this issue. We resolved by going to Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by bjohnson on CODESYS and Win10 - "the version profile is not valid" error ^{CODESYS Forge talk (Post)}
We just had this problem today when our IT updated a group policy. You need to go to Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by bjohnson on CODESYS and Win10 - "the version profile is not valid" error ^{CODESYS Forge talk (Post)}
We just had this problem today when our IT updated a group policy. You need to to got Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by davemansell on control loop library IIR filter ^{CODESYS Forge talk (Post)}
Hi there i am experimenting with the IIR filter from the control loop library but have been unable to get it to function no matter what inputs I set I get errorID of wrong_configuration (3). Does someone have a working example that they can share. Best regards Dave
Last updated: 2025-07-29

Post by mascara on TouchScreen does not work in Webvisualization. ^{CODESYS Forge talk (Post)}
I am configuring a Lenovo M900 computer with CODESYS Control RTE SL 3.5.20.30. I use an Aoc E2272pwut LED 21.5 monitor. The touchscreen works perfectly in the Windows 10 PRO environment but does not work in the WebVisualization environment (Window opened at PLC startup). Does anyone know if it is necessary to configure any drivers in Win RTE? I am at your disposal for any questions. Thank you.
Last updated: 2024-11-11

Post by nz-dave on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
just now i have tried loading the achive file from today at work. using 3.5.20.4 same as at work. when i open the project it says " prject inspection, this project has been saved with a different version(codesys v3.5 sp20 patch 4).? one option in the above "project inspection" window just wants to download that same version again. the other option leads no where as it say the required add ons cant be resolved. just end up going around in circles.
Last updated: 2025-01-22

Post by pernockham on Linking to IO during runtime with hot swap? ^{CODESYS Forge talk (Post)}
I have a project where a single PLC shall control multiple nodes (up to 10 units?) with IO connected through profinet. Ideally each node should be identical however with time I see situations were different setups/configurations will be used. Codesys PLC (GVLs) |Profinet | |--PNIO-node-1--| | | AIO, | | DIO, | | CNT etc. | |--PNIO-node-2--| | | AIO, | | DIO, | | CNT etc. Ideally I think of a configuration through yaml/xml-files (the assignment/linking of the profinet nodes towards GVL-variables in the PLC as well as scaling, channel configration etc.). Would be grateful if someone could suggest library/-ies that can handle the following: - Verify what IO is connected to a device/node. - Hot-swap/assign link for IO towards GVLs, either automatically or through a HMI.
Last updated: 2024-10-11

Sort by relevance or date