Post by erictur on CODESYS Control for Linux ARM SL (32 bit) on Moxa UC-3100 IPC ^{CODESYS Forge talk (Post)}
UC3100 comes with Arm Cortex-A8 1 GHz and belongs to Moxa Industrial Linux 1 (Debian 9) for Arm-based Computers. I tried to install the CODESYS Control for Linux ARM SL (32 bit) on Moxa UC-3100 IPC. Unfortunately, the Third-party requirements: - libc >= 2.27 (required by CodeMeter Runtime) of the CODESYS Control for Linux ARM SL cannot be met on the Debian 9, which comes with glibc 2.24. I read the post by @johnlee (Getting Start with Codesys Control for Linux SL) (https://forge.codesys.com/forge/talk/Runtime/thread/0a515ced3f/). Where he discusses installation of CODESYS Control for Linux ARM SL on Debian 9. There was CODESYS Linux runtime v3.5.14 availble and it was successfully intalled on the Debian 9. However, the CODESYS Store has the oldest version V4.1.0.0 32 bit available. There is no way to find the CODESYS Linux runtime v3.5.14. So is there any work around for this? Or I cannot install the CODESYS Runtime on any of the Moxa IPCs based on the Moxa Industrial Linux 1 (Debian 9)?
Last updated: 2025-07-10

Post by gurke258 on Codesys Safety EtherCAT with Beckhoff ^{CODESYS Forge talk (Post)}
Hello :) We are currently configuring a system with Codesys as SoftPLC on a Linux system and with Beckhoff terminals. I have already gained some experience with Codesys and also with TwinCat incl. TwinCAT Safety. What is new to me now is Codesys in conjunction with Beckhoff safety terminals. We are currently using an EL1918 & EL2904 here. I have been able to integrate both terminals into my project, but I don't know how to interconnect them so that they communicate. That's a bit easier with Twincat ^^ Can any of you help me? I would also prefer a Codesys EtherCAT Safety training or webinar if anyone knows of one. Unfortunately I can't find such an event on the internet.
Last updated: 2023-11-07

Post by martin-k on Beispieldateien finden / Inhalt der Packages ^{CODESYS Forge talk (Post)}
Hallo, ich habe https://store.codesys.com/de/codesys-in-building-automation-examples.html runtergeladen und mit dem Installer und Adminrechten installiert. Jedoch finde ich auf C: keine *.project* Dateien. Kann mir jemand erklären wie ich an die Examples dran komme? Auch von Wago habe ich Packages bekommen in denen Beispiele enthalten sind. Auch hier finde ich nix. (Googel habe ich gefragt. Aber mit den Stichworten kommen viele Treffer die alle nicht hilfreich waren.) In der Hilfe von Codesys habe ich natürlich auch gesucht, aber auch hier nichts erklärendes gefunden. Angeblich findet sich was in C:\Programme\CODESYS 3.5.19.40\CODESYS\Projects oder auch unter C:\Users\BENUZTERNAME\CODESYS Examples Aber wie geschrieben finde ich auf C:\ nix was ein Beispiel wäre. Wäre echt super wenn mir jemand einen Hinweis geben könnte. Danke im Vorraus, Martin
Last updated: 2023-11-16

Post by vamsi on How to configure gateway for programming RPi 2B using Codesys ^{CODESYS Forge talk (Post)}
I am using a Raspberry Pi 2B. Installed Codesys V3.5.20.1 64-bit and installed 'CODESYS Control for Raspberry PI 4.12.0.0' I am able to install the packages using the 'Update Raspberry Pi' option, but when I try to log into the RPi, in the Device tab it says 'Sacn fail. Please checl that the gateway is running and that its settings are correct'. My setup looks like this. I connected my RPi to my company LAN and also my laptop to company LAN (using HP Docking station). This setup worked when I installed 'CODESYS Control for Raspberry PI', but now I donot know how to configure the gateway. Could anyone please help me in finding what I have to enter in the gateway configuration? Thanks, Vamsi.
Last updated: 2024-07-10

Post by damian177 on Problem with downloading OPC UA tags by Data Source Manager ^{CODESYS Forge talk (Post)}
Hi, In Codesys V3.5 SP20, using Data Source Manager I am trying to connect to the OPC UA server and receive tags from it. The connection is ok, but the Codesys have a problem with downloading Tags group. The window (downloadingTags.jpg in attachement) never stop. After waiting for a while, I disconnect the connection and only the Server group remains downloaded, with OPC UA server diagnostic data (and this is read in Codesys). Of course, I tried connected via another OPC UA client : UaExpert , and everything works as it should, all tags are downloaded (Uaexpert.jpg screen). Has anyone on the forum encountered the OPC UA client configuration in Codesys? Is it possible to manually request the appropriate tags from the OPC server for reading in Codesys?
Last updated: 2024-09-03

Post by tqvist on Gateway Start ^{CODESYS Forge talk (Post)}
Hello, I am trying to connect to my PLC (IFM CR711S) via VPN(EWON COSY). I have been told to use Gateway SP14 or higher. I installed CODESYS 3.5 SP20 Patch4. In the Codesys Installer Software I can sleect "Set Gateway Service" and I do so for CODESYS 3.5 SP20 Patch4. I can start the Gateyay and select About and it shows: "CoDeSys Gateway V3 - x64 Version 3.5.20.40" (see attached) For compatibility reasons I have to run my PLC code in 3.5 SP11 and when I start I can first connect but then somehow the system restarts an older version of the Gateway only displaying: "CoDeSys Gateway V3" (see attached) I guess my question is how to run an old Cocesys Software with a new Gateway?
Last updated: 2024-11-26

Post by mazino on How to download dependencies packages for CODESYS Control for Raspberry Pi SL ? ^{CODESYS Forge talk (Post)}
Hi starmaxou, I’m facing the same issue you mentioned with the dependencies for the CODESYS Control for Linux SL installation. I was able to find the manual downloads for the CODESYS Edge Gateway and CodeMeter, but I’m still stuck on the other two dependencies: CODESYS Control SL Extension v4.0.0.0 CODESYS Control SL Deploy Tool v4.10.0.0 Since you’ve encountered the same problem, I’d really appreciate any help or insights you can share on how you were able to resolve it. Any tips or suggestions would be greatly appreciated! Thanks in advance!
Last updated: 2025-03-07

Post by fkoenig on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Hallo Zusammen, bei meinem Projekt habe ich die CODESYS Control Win 64 3.5.21.0 auf einen Windows 11 Pro PC installiert. Auf meinem Laptop befindet sich die CODESYS Version 3.5.21.10 In meinem Codesys Projekt wurde unter dem Ethernet-Adapter der KNX Stack hinzugefügt. Das Projekt ist beim übersetzen fehlerfrei. Wenn ich das Projekt anschließend auf die CODESYS Control Win 64 aufspiele, kommt bei 98% des downloads die Fehlermeldung 17 unaufgelöste Referenzen... (siehe beigefügter screenshot "Fehlermeldung_unaufgelöste_Referenzen") Im screenshot "Auflistung_unaufgelöste_Referenzen" ist zu sehen, welche KNX Element nicht aufgelöst werden können. Wie kann ich diese Fehlermeldung beheben bzw. was muss ich machen, dass ich das Projekt aufspielen kann?! Für eure antworten bedanke ich mich im Voraus! MFG koeni
Last updated: 2025-06-30

Post by bbmussatto on Connetion with Topcon Opus B3 ECO Full display ^{CODESYS Forge talk (Post)}
I have a Topcon Opus B3 ECO Full display and i wanna program it with codesys, but i cant connect it to the display. After creating a new project, i choose the device "Opus B3-B4-B6-3.5.19.50" that is already available in my version of codesys, but i think the problem is that my version of codesys or something else is not the same as the codesys runtime version running on my display. Can anyone tell me how i can see the codesys runtime version on my display? i tried looking in the settings (Daemon > CDS) on the display, but all i see is "N/A" for "Customer Number", "Customer Part Number" and "Customer Serial Number". Can anyone help me make this connection?
Last updated: 2025-10-07

Post by ranadheer on Implementation IEC-104 ^{CODESYS Forge talk (Post)}
Hi Everyone, As we didn't have client for IEC - 104 - only server server is available , so because of that we are trying to make establish the communication between the external simulator as a Client and codesys itself as a server. We are looking for the variable behavior from CODESYS has to change according to the message triggered by the CLIENT (we are using simulator Application like Redisant). We are able to see the log data as the status of triggering the SCS from Client received to the Log data of the codesys device(attached screen shot of it) and in simulator panel we had set the details to trigger the data from Redisant to Codesys. Current Status: The project builds and runs successfully, but I need guidance on how to connect this to an external IEC-104 simulator for testing and visualization by using demo mode.
Last updated: 2025-10-14

Post by talpade on WAGO PLC 200 750-8216 Ethernet connection to Codesys 3.5 ^{CODESYS Forge talk (Post)}
Hello, I have the WAGO PLC 200 750-8210. In addition I have downloaded the "WAGO Devices and Libraries 2.0.4.3" and installed the library into the Codesys v 3.5. I then create a new project on Codesys 3.5 and select the device "750-8216 PFC200 (WAGO)" (which I downloaded from the WAGO library). However when I have connected the ethernet cable from the WAGO device to my computer and on my codesys 3.5 i press "Scan Network" on codesys and it does not detect the device. How can I get it to detect the device? (I have put the ethernet cable from my WAGO to the computer, but it does not show the device).
Last updated: 2024-02-05

Post by tecnocons on Trouble Writing Files to External Paths in CODESYS ^{CODESYS Forge talk (Post)}
Hello everyone, I'm encountering an issue in CODESYS regarding writing files to external paths. Despite correctly configuring the placeholder in the CODESYSControl_User.cfg file to allow access to an external folder, CODESYS doesn't seem to write any files, and no errors are reported. The issue on the older versions was absent with no placeholders. I've checked the operating system permissions, and they seem to be in order, but the issue remains. Has anyone faced a similar situation or has any suggestions on how I might resolve this problem? Any help would be greatly appreciated. Thank you in advance for your support. I'm using raspberry PI as a logger. RPI3 Buster Codesys 32bit SL V4.11 Codesys Win64 3.5.20 [SysFile] PlaceholderFilePath.1=/home/pi/scan, $SCAN$
Last updated: 2024-04-09

Post by valenting on Can't use new licensing with Raspberry Pi ^{CODESYS Forge talk (Post)}
Hi, I'm using Codesys control for Raspberry Pi in the latest version (4.11.0.0) When I try to install a license with the new application-based licensing, I have an error "returncode 403046401" (using codesys SP18) I updated to codesys SP20, and now I get the following error: "The selected conainer [0]: SN=..., Version=1.18, Chip=0, Rev=0 does not fit to your ticket. Please select a suitable one." The license I'm trying to install is a Codesys Control Basic L license, with a Codesys Visualization L option, according to the needs of my application. What can I do to activate my license ?
Last updated: 2024-04-22

Post by starmaxou on How to download dependencies packages for CODESYS Control for Raspberry Pi SL ? ^{CODESYS Forge talk (Post)}
Hi everyone, I'm trying to install the CODESYS Control for Raspberry Pi SL package. The computer with CODESYS software is offline for security reasons. So, I downloaded the package on another computer and installed it manually. But this package has dependencies packages: CODESYS.Control SL Extension Package, V4.0.0.0 CODESYS.Control SL Deploy Tool, V4.10.0.0 As I said, the computer with CODESYS is offline. I cannot use the package installer to search for these packages. I did not find them in Codesys Store with another computer. Do you know where to find and download them? Thank you in advance for your help!
Last updated: 2024-05-30

Post by miltos on licensing question ^{CODESYS Forge talk (Post)}
Greetings to all, I'm working on a webvisu project on control win V3 x64 runtime, and have purchased 3 licenses for my application. -Codesys Control Standard M -Codesys Visualization L -Codesys Communication M I have them installed on a Codesys usb dongle When I try to download the program, a login error window appears with the message "No valid license found for the webvisualization". The control win v3 communicates with 3 plc, and have enabled communication over codesys V3 communication by adding one datasource for every plc in the datamanager. If I remove the data manager from the project, the rest of the visualisation can be downloaded normally. Do I need to purchase another License and which one? Please find attached the software metrics and the error screen.
Last updated: 2025-10-31

Post by martinlithlith on CODESYS Control for Raspberry Pi SL on Raspberry Pi 4b ^{CODESYS Forge talk (Post)}
hi! a quick question - is it possible to run CODESYS Control for Raspberry Pi SL license on a raspberry pi 4b? i know it says all models in the data sheet, but im not sure it the data sheet has been updated seince the MC-processors for pi. best, Martin
Last updated: 2023-09-04

Post by ltrinta on AWS IoT Core connection using AWS certificates ^{CODESYS Forge talk (Post)}
Hi there I want to know if there is possibility to connect a CODESYS application to AWS IoT Core using the certificates owneds by AWS. In the examples of CODESYS using AWS IoT Core library, we need to generate a local certificate and update it to AWS IoT Core. I want to use AWS IoT Core certificates. Regards, Leonardo
Last updated: 2023-09-28

Post by turndapage on Can't Add Symbol Configuration ^{CODESYS Forge talk (Post)}
I've got a Weintek HMI with CodeSYS built-in. I've got it connecting to CodeSYS and downloaded. The connection guide says I need to add a symbol configuration by right-clicking on the application and adding it, but it does not show up in the available objects. Is there something else I have to do to create a symbol configuration object?
Last updated: 2023-10-04

I don't know if this is where I should ask this, but I'm trying to get a Codesys OPC UA Client set up with a Kepware OPC UA Server ^{CODESYS Forge talk (Thread)}
I don't know if this is where I should ask this, but I'm trying to get a Codesys OPC UA Client set up with a Kepware OPC UA Server
Last updated: 2023-10-19

Post by mawaloc on creationg on dynamic widgets ^{CODESYS Forge talk (Post)}
Hello, Is there is any way to create a different dynamic widget than what can be found on codesys. I would like to create similar with adding things like limits etcc. in codesys I just see 180 deg or 360 deg. and shape are differents Any tutorial on it. ThankYou
Last updated: 2023-10-20

Post by sedoerr on Problem mit Codesys LB/FBD 4. ^{CODESYS Forge talk (Post)}
Hallo zusammen, seit dem Update des Packages Codesys LB/FBD von Version 4.2.0.0 auf 4.3.0.0 bekomme ich beim compilieren folgende Fehlermeldung (siehe Screenshots). Hat jemand eine Idee was die Ursache sein könnte? Der rechte Baustein ist eigentlich ein FB aber die Instanz wird beim compilieren einfach entfernt. Edit: Wenn ich die Ausführung des rechten Bausteins in einem Execute mache, dann wird fehlerfrei compiliert.
Last updated: 2023-10-26

Post by anhkdv on Data storage and Export in Codesys ^{CODESYS Forge talk (Post)}
I am doing a SCADA project on temperature and humidity monitoring system. The customer requested that we store the database through codesys without the need for intermediary software such as MySQL, MSSQL,... and be able to export reports at selected times, reports exported to csv files. , xslm,... Can anyone help me?
Last updated: 2023-10-29

Post by sonnh on How to use more 4 instances of CANopen/Profibus/Modbus with The application-based license CODESYS Control ^{CODESYS Forge talk (Post)}
The codesys application license allows the use of up to 4 fieldbus instances (eg Modbus). I need to use more instances than that. Can I use the Modbus library instead? Does this usage require a license? Similar to other libraries such as CanOpen, Modbus TCP...
Last updated: 2023-11-02

Post by ggis on Unable to connect to git remotes through Codesys. ^{CODESYS Forge talk (Post)}
When trying to connect to a Github repository in the Git remotes windows of Codesys, the user can be the account username or the account email, while the password is the Github token. (I know this is an old topic, but I lost some time figuring it out from the guides.)
Last updated: 2023-11-10

Post by leon78 on Codesys 3.5 SP17 Patch 2 CheckBounds (POUs for Implicit Checks) ^{CODESYS Forge talk (Post)}
Unfortunately, it was fixed in SP19, but I need SP17 CDS-82162 Bug Compiler: Checkbounds is not working for dynamic arrays with VAR_IN_OUT as index access Fixed [[GENERAL]] Compilerversion >= 3.5.19.0 https://de.codesys.com/fileadmin/data/Images/System/Releaseinformation/Release-Notes-CODESYS-35190.html
Last updated: 2023-11-16

Sort by relevance or date