Post by meldawltly on Excel to Codesys 3.5 ^{CODESYS Forge talk (Post)}
Hello everyone, I have an excel file that i want to import into codesys3.5. Any idea how and what libraries can i use? To more clarify i have a table in codesys and i want to import my excel file into this table/ Thank you
Last updated: 2023-12-11

Post by ton on How to create a stopwatch? ^{CODESYS Forge talk (Post)}
Hi, i guess you want to make a hour counter. You need to store the measured value. Try to use a retain variable, but need a graceful shutdown, or save it your self. see https://forge.codesys.com/forge/talk/Runtime/thread/278e325579/ Succes.
Last updated: 2023-12-12

Post by open on How to create a stopwatch? ^{CODESYS Forge talk (Post)}
Thanks everyone for your input, I am using persistent variables to retain the timer value after machine shutdown, and main task to be as low as possible for the seconds TON to be accurate.
Last updated: 2023-12-14

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
I have DINT data from drive input and would like to use this data in Bools in bunch of the FBs. I have tried using Union but it is not working. Please suggest
Last updated: 2023-12-14

Post by nadim4114 on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
Hi @andreal, Were you able to adapt a codesys runtime to your linux based device? I am planning on the same lines. we want to develop a small controller of 64IOs for our application. We want to adapt codesys runtime on our Arm processor based embedded linux boards.
Last updated: 2023-12-26

Post by reinier-geers on One project diverent devices ^{CODESYS Forge talk (Post)}
Ive got a project with 6 Divices version 9. They use networkvariable to communicate. I whant to add an Extra. But that one is probebly verion 19. Should that be a problem ? i have to update the software to 19. But i cant update the devices
Last updated: 2024-01-12

Post by ben1 on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
Hey mate, did you get to the bottom of this? If not, have you double checked the buttons are linked to the correct variables and/or performing the correct action? Have you tried always enabling the block to confirm false is moved to the variable if so?
Last updated: 2024-02-01

Post by gurkan on OPCUA array max length? ^{CODESYS Forge talk (Post)}
2000 works. When testing with UA Expert there is a timeout from the OPCUA Server when trying to subscribe to the variable CPU do not seems to be to affected. The memory(RAM) however is building up
Last updated: 2024-02-19

Post by manuknecht on Creating softmotion axis dynamically ^{CODESYS Forge talk (Post)}
Hi I was wondering the same thing. I managed to dynamically add an EtherCat Slave but I could not find out how to add a softmotion axis to it. Does anyone have an answer to this? Thanks in advance!
Last updated: 2024-02-21

Post by mattr on IFM CR711S Version Mismatch ^{CODESYS Forge talk (Post)}
New to working with Codesys, it appears my device library has a newer version then the hardware i'm working with... I cant seem to find a way to update the hardware, or downgrade my library to match them up. I get this error Anythoughts?
Last updated: 2024-03-03

Post by davidbo on I want to convert a WORD to a hex string like 15.432 to '3C48' ^{CODESYS Forge talk (Post)}
I try with BYTE_TO_HEXinASCII but I cant get it right. How do I convert a word value like 15432 to the HEX text string '3C48'
Last updated: 2024-04-19

Post by timvh on Remote connection to ifm PLC & HMI ^{CODESYS Forge talk (Post)}
Maybe also good to know that you could use the CODESYS installer to switch between gateways. - open the CODESYS installer - Select the (hamburger) menu - Select Settings - Select Services Then select the Gateway you would like to use.
Last updated: 2024-04-23

CNC - system goes to X=0 Y=0 before CNC file execution starts, how to avoid that? ^{CODESYS Forge talk (Thread)}
CNC - system goes to X=0 Y=0 before CNC file execution starts, how to avoid that?
Last updated: 2024-05-07

Post by culius on Official MQTT-Client: MAX_RECEIVE_BUFFER_SIZE_EXCEEDED ^{CODESYS Forge talk (Post)}
Hey Guys, could you give a explaination of how to change the g_udiMaxPacketSize from 6000 to 100000 and g_udiMaxPayloadSize from 4096 to 80000 ? When I go to the library the parameter is not editable. I would really appreciate it :) Kind Regards
Last updated: 2024-06-07

Post by lmartin on Scripting - how to get the fixed compiler version from Project settings ^{CODESYS Forge talk (Post)}
Hi I search the way to be able to get the fixed version of the compiler set in the Project settings via a python script. Anabody know how to do that?
Last updated: 2024-06-13

Post by andreag0 on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
Good to know. I am looking for some soluction to avoid PLC Handler and OPC-UA. Thank you.
Last updated: 2024-06-14

Post by jeffgamsby on Accessing ModbusTCP addresses from python ^{CODESYS Forge talk (Post)}
Hi, I am new to modbusTCP and I am trying to access Input registers from codesys (3.5.SP13). The offset is 16#0000 and I am trying to access Channel 1[24] %IW24 to pull analog values. I am using pyModbusTCP and I need to supply a modbus address and the number of registers to read. What does 16#0000 mean in terms of the actual offset, how do I translate this number plus the channel to access this info via python? Any help would be appreciated, thank you.
Last updated: 2023-09-20

Post by macros8 on Translation - How to get text as reference in Frames translated? ^{CODESYS Forge talk (Post)}
Hi all, I need a help. I want to create Frame where some parameters are done via reference input to this frame. What I have realized that if I use for Label/Caption etc. string variable (%s) it is not included in translation list. This is a quite a big deal and I did not find way how to add text to the list manually. Would you give me a hint how to proceed? I hope there is a way (workaround) how to do it. Thanks a lot. M.
Last updated: 2023-12-01

Post by liamb on Converting CANbus to Decimal from signed 2's complement ^{CODESYS Forge talk (Post)}
I need to combine two 8 bit CANbus messages to 16 bits signed int then convert to decimal Decimal from signed 2's complement. I've been using the below code to read for new messages, combine them then assign them to a variable What is the best way to do this for from signed 2's complement? fbRxMessage351(Data := RxMessage351Data); IF fbRxMessage351.NewMessage THEN ChargeVoltage := (WORD_TO_REAL((RxMessage351Data[0]) + ((RxMessage351Data[1]) * 256))) * 0.1; END_IF
Last updated: 2024-08-16

Post by egau on Mutate Hash table value ^{CODESYS Forge talk (Post)}
Hi, using the ElementCollections Library, why isn't it possible to mutate a value found within a HashTable? From what I understand, the only way to change a value would be to use the RemoveByKey(), followed by AddKeyValuePair(). My goal is to use a Data Structure that works like a Dictionary in Python. The HashTable seems to come close to this, except that the values themselves seem to be immutable... In python, we can mutate a dict easily (see attached picture).
Last updated: 2024-08-29

Post by timvh on Unable to Connect to Modbus RTU Device ^{CODESYS Forge talk (Post)}
If your Control Win is the Modbus "Master" then your configuration should be something like: Modbus_COM (Serial port) - Modbus Master (this is the Control Win SoftPLC actively setting up the communication) - Modbus Slave (this is then your WAGO 750-315) You need to add channels to the Modbus Slave configuration to inform the master which variables to read/write from the Wago module. The way you configured it now, the Control Win is also a slave. PS, don't forget to put the PLC (Control Win) in Run.
Last updated: 2024-09-03

Post by dogulas on OPC UA C# client connecting to OPC UA CODESYS server ^{CODESYS Forge talk (Post)}
Ok, for the sake of completeness in case anyone else has this problem. I can tell you that what finally worked for me was to change the line: // create an ExtensionObject to wrap the value to be written ExtensionObject extensionObject = new ExtensionObject( new ExpandedNodeId("GVL_StructA", 5), structAData ); to: // create an ExtensionObject to wrap the value to be written ExtensionObject extensionObject = new ExtensionObject( new ExpandedNodeId("GVL_StructA|defaultbinary", 5), structAData ); I'm sure there are many other problems that could cause this very generic error, but this was my problem.
Last updated: 2024-12-30

Post by nz-dave on sysfile- transfer file to pc ^{CODESYS Forge talk (Post)}
Hi Trying to send csv file to c:\data\xxx.csv Im able to save to plclogic and after doing this https://forge.codesys.com/forge/talk/Runtime/thread/5cac1390b4/ i can now "file transfer" to host pc downloads. but still cant transfer to c:\ im sure i have done this in the past with older versions of the 3.5 ide? just concat the file name as c:\data\My_Filename.csv. any ideas? cheers
Last updated: 2025-04-23

Post by gabrielarffa on Modbus TCP/IP having problems with global variables ^{CODESYS Forge talk (Post)}
I'm using Modbus TCP/IP to communicate Codesys with Elipse E3 as the master for a college project. I have made a list of global variables to organize the programming in two different POUs. The problem is, when I try to do the mapping of variables, the program informs me of an error due to the identifiers having a "." on their names. Do I have to reorganize my code to make it an unified block or is there a way to declare their names without changing all the code structure?
Last updated: 2025-05-20

Post by gabrielarffa on Modbus TCP/IP having problems with global variables ^{CODESYS Forge talk (Post)}
I'm using Modbus TCP/IP to communicate Codesys with Elipse E3 as the master for a college project. I have made a list of global variables to organize the programming in two different POUs. The problem is, when I try to do the mapping of variables, the program informs me of an error due to the identifiers having a "." on their names. Do I have to reorganize my code to make it an unified block or is there a way to declare their names without changing all the code structure?
Last updated: 2025-05-20

Sort by relevance or date