Post by hyplcmotion on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
Hello, I’m encountering the same issue. I only receive these errors when downloading to the PLC—there are no errors during the build—after upgrading to CODESYS 3.5.21.10. Is there any known fix or recommended solution? Visualization seems running ok, no PLC log error. Visualization: Error: The element of type 'VisuFbLabel' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemSimple' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemSimple' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemImage' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemSimple' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemSimple' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemImage' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemButton' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemButton' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds. Visualization: Error: The element of type 'VisuFbElemSimple' could not be updated. Reason: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
Last updated: 2026-01-26

Post by jvfred on Display problems on Weintek's cMT3092x HMI ^{CODESYS Forge talk (Post)}
Hello, I have the same issue with my cMT display. I know it's a communications issue with my Eurotherm E+PLC400 PLC using the Codesys V3 driver. Were you ever able to figure out what the problem was and if so, what was your fix. Any help would be greatly appreciated.
Last updated: 2023-12-01

Post by exkrim19 on Unable to connect to this device ^{CODESYS Forge talk (Post)}
What worked for me with this error was to go to Tools -> Update Raspberry Pi, select Install, and from the popup screen, there are options to change your installation (I changed it to single core, instead of multicore), and I was then able to connect to my Rpi 4.
Last updated: 2024-06-28

Post by elerensx on Uninstall Codesys2.3 got RUNDLL There was a Problem Starting error ^{CODESYS Forge talk (Post)}
Try to repair Codesys2.3 and need to uninstall and reinstall it. Got this RUNDLL message when uninstall Codesys 2.3: There was a problem starting, the specificed module could not be found. Please refer to attached file. Followed suggestions from Microsoft website and didn't work out. I am using Codesys2.3.9.16. Any help is appreciated.
Last updated: 2024-07-15

Post by maxsus on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I dont know exactly why this error happens, but I think its because you have some wrong whiles. Because when i had that problem it was because I accidently wrote while true then and it was stuck in the loop.
Last updated: 2024-08-21

Post by maxsus on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I dont know exactly why this error happens, but I think its because you have some wrong whiles. Because when i had that problem it was because I accidently wrote while true then and it was stuck in the loop.
Last updated: 2024-08-21

Post by denis777 on Dynamische Datenquellenanbindung ^{CODESYS Forge talk (Post)}
Moin zusammen, ich habe vor die OPC UA-Verbindung dynamisch einzubinden und es auch nach der Codesys-Anleitung probiert. Dabei hatte ich aber das Problem, dass ich zusätzlich zu den Config-Variablen auch noch eine statische URL angeben muss, was dann aber den Sinn der dynamischen Vergabe verfehlt. Hat dazu schon jemand Erfahrungen gesammelt und kann mir vielleicht Tipps geben, was ich noch beachten muss? LG Denis
Last updated: 2024-10-24

Post by denis777 on Dynamische Datenquellenanbindung ^{CODESYS Forge talk (Post)}
Moin zusammen, ich habe vor die OPC UA-Verbindung dynamisch einzubinden und es auch nach der Codesys-Anleitung probiert. Dabei hatte ich aber das Problem, dass ich zusätzlich zu den Config-Variablen auch noch eine statische URL angeben muss, was dann aber den Sinn der dynamischen Vergabe verfehlt. Hat dazu schon jemand Erfahrungen gesammelt und kann mir vielleicht Tipps geben, was ich noch beachten muss? LG Denis
Last updated: 2024-10-24

Post by rafaelbrito on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
When trying to use the Visualization ToolBox, no objects appear and the following error appears. Could you tell me what this error could be? The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. Can anyone tell me what this error is?
Last updated: 2024-12-03

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
After correspondence with Mr Schwellinger from Codesys the resolution for this was to uninstall the SL 4.14 and install SL 4.13 on the device. Once this was done the licensing worked as expected. I noted that the container then showed a Version 3.00 and not 0.00.
Last updated: 2025-01-11

Post by pafarrell on EtherCAT quick start for advanced programmers ^{CODESYS Forge talk (Post)}
It would be great if there was a thread that had some quick-start links for basic how-to. But one that advanced programmers can jump into. I found this video playlist by SoftMotion-Black, which was very, very helpful: https://www.youtube.com/playlist?list=PLkc8m2OD0r9xJyfTiCBb1vuU_d2yBhjZ_ This person has some other great vids like creating your own custom library, which is awesome for OEMS.
Last updated: 2025-05-14

Post by zoppp on Visu Frame-configuration___text will not work ^{CODESYS Forge talk (Post)}
Yup, I've been having the exact same issue. A workaround that was working until Visu 4.8.0.0 was using TextList as the type in the frame configuration and then wrapping the text in quotes when configuring it. Im not sure if it will work with variables and I know it does not work if the type is text.
Last updated: 2025-06-17

Post by onstage on Unable to add EL6751 to Control RTE V3 on W11 IoT LTSC using Eng. V3.5 SP21 ^{CODESYS Forge talk (Post)}
For reference, it was just me being unfamiliar with EtherCAT in CoDeSys. Anyone with knowledge who would have opened the ScanResult screenshot would have identified that the preceding EK1100 was the device missing in the library. Bottom line - Do something else for a while and then get back at it with fresh eyes!
Last updated: 2025-09-08

Post by dav3 on Exception auf Raspberry, CMCommCycleTask Tainted ^{CODESYS Forge talk (Post)}
Hello, I don't really know what my problem was, but it's working for me at the moment. All i did was to change my code because of some REAL_TO_INT conversions, like i wrote above. And later a complete new Pi setup (because of 64x support with 4.10.0.0 now).
Last updated: 2024-02-16

Post by gseidel on Movesuperimposed Command Aborted Error ^{CODESYS Forge talk (Post)}
Hi transcend, most likely cause: one of the motion FBs was not called in each IEC cycle. See https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_basic_common_errors.html. A different possible error, if you are using buffermode buffered or blending: the execution order of the motion FBs was wrong. See https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_buffermode_execution_order.html. Best regards, Georg
Last updated: 2026-04-13

Post by fabrp on CPU + EtherCAT redundancy ^{CODESYS Forge talk (Post)}
Hi TimvH, thanks for feedback. I also test the redundancy with Wago PFC 8212 but when I did it (firmware 28) it was not so much stable..Did you have some issue on master/slave switchover? are you using with EtherCAT remote I/O? I was looking for a most powerful hardware (PC based, x64) BR
Last updated: 2026-02-01

Post by mozed on Connection to device closed ^{CODESYS Forge talk (Post)}
Hello I am using an OpusA3 with version 3.5 SP17 Patch 3 as part of a project. I had no real problem before I encountered a problem that blocked me. The detection of the OpusA3 from Codesys is done correctly. The gateway is well configured and if I ping the gateway or the OpusA3 I receive the response correctly. The problem is that when I try to connect, the Opus screen freezes and a few moments later Codesys displays an error message ("connection to device closed"). I tried to change PC, to update the runtime, to change OpusA3 but the problem remains the same. I'm a little lost knowing that before it worked without problem. I went back to a previous version of the project (where it worked correctly) but the message still appears. Do you have any clues to solve the problem? Sincerely,
Last updated: 2023-08-23

Post by smartcoco on Add visual background FB blocks. ^{CODESYS Forge talk (Post)}
Can you add a background FB block to the visualization page, and loop through this FB block when the page is in display mode. This FB block requires two more functions, one for executing when the page is displayed and the other for executing when the page is closed.
Last updated: 2024-01-16

Post by dekelec on Codesys 2.3 & Peak PCAN ^{CODESYS Forge talk (Post)}
I use Peak USB adapter daily to download from CoDeSys 2.3 and 3.5 to IFM, EPEC and other controllers. The process: - First you need to install the appropriate driver. Link: https://www.peak-system.com/Drivers.523.0.html?&L=1 - Restart the computer - Start the CoDeSys application - Change the name of the adapter in Communication parameters, as mentioned in previous comment. Write the name exactly as written "Peak_USB", as it could also be case sensitive (defines which .dll file to use). If this doesn't work I would contact the vendor of the controller to find out the procedure. In the attachment I've added a FAQ document from IFM regarding using PCAN USB. P.S. I've noticed in your picture of communication parameters a channel via TCP/IP is mentioned. In this case a USB to CAN connection is not being used. First you should change the channel/gateway to connect via CANbus or connect using an Ethernet cable.
Last updated: 2024-07-09

Post by dmb-fan on Hilscher cards CoDeSys Control RTE ^{CODESYS Forge talk (Post)}
You have to know this (and the crap help site don't tell you): - Changes in CODESYSControl_User.cfg, not in CODESYSControl.cfg (crash of PLC/Win possible) - Redundancy is important for Profibus, also if you don't use it because the libarys depending on it - The no. after the device is the slot numer for PLC device config [ComponentManager] Component.1=CmpDrvSchedulerAMP Component.2=CmpCodeMeter Component.3=CmpHilscherCIFX Component.4=CmpNetXCanDlDrv ; this is not in help, but thats makes the internal driver load Component.5=CmpRedundancy Component.6=CmpRedundancyConnectionIP [CmpHilscherCIFX] TraceLevel=0xFFFFFFFF InterruptMode=0 DMAMode=1 ;DynamicFirmware=1 BootloaderFile=$Firmware$/HilscherCIFX/Firmware/NETX100-BSL.bin FirmwareFilePath=$Firmware$/HilscherCIFX/Firmware ;non-dynamic declaration of FW-files: ; 100 !!! CIFIX50 cards but files called 100 !!! Device.0.BootloaderFilePath=$Firmware$\HilscherCIFX\Firmware\NETX100-BSL.bin Device.0.Channel.0.FirmwareFile=$Firmware$\HilscherCIFX\Firmware\cifxcom.nxf Device.1.BootloaderFilePath=$Firmware$\HilscherCIFX\Firmware\NETX100-BSL.bin Device.1.Channel.0.FirmwareFile=$Firmware$\HilscherCIFX\Firmware\cifxdpm.nxf ;;;; And good luck, you will need it ! ;;;;
Last updated: 2026-10-23

Post by wallandreas008 on OPC-Server V3 - keine Items zu sehen... ^{CODESYS Forge talk (Post)}
Hallo ich habe ebenfalls Probleme mit dem Verbindungsaufbau zu 3 ABB SPSen nach einem Windows Update. hier meine OPCServer.ini [Server] updaterate=200 publicgroups=0 logevents=1 syncinit=1 PLCs=3 PLC0=PLC1 PLC1=PLC2 PLC2=PLC3 [PLC:PLC1] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC01 reconnecttime=10 waittime=12 active=1 logevents=1 logfilter=0 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_101 parameter0=Address value0=192.168.0.101 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [PLC:PLC2] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC02 reconnecttime=15 waittime=10 active=1 logevents=1 logfilter=10 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_102_ parameter0=Address value0=192.168.0.102 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [PLC:PLC3] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC03 reconnecttime=15 waittime=10 active=1 logevents=1 logfilter=10 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_103_ parameter0=Address value0=192.168.0.103 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [Redundancy] NumOfGroups=0 Im Logfile habe ich immer diese Meldungen: ;********* ;<loggername>OPCServer.log</loggername> ;<logoptions> ; <maxfiles>0</maxfiles> ; <maxfilesize>1048576</maxfilesize> ;</logoptions> ;********* 2026-09-29T12:01:40.598+0200, OPC-Server V3.5.20.0 by CODESYS Development GmbH. 2026-09-29T12:01:40.598+0200, Path for ini-File: C:\ProgramData\CODESYSOPC\OPCServer.ini 2026-09-29T12:01:40.598+0200, Path for AE-Config: C:\Program Files (x86)\CODESYS 3.5.20.0\CODESYS OPC Server 3\OPCServerA.ini 2026-09-29T12:01:40.598+0200, AE-Configuration unused. 2026-09-29T12:01:40.598+0200, 3 PLCs configured 2026-09-29T12:01:40.598+0200, [PLC1]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC2]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC3]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC1]: Open communication successful 2026-09-29T12:01:40.600+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC1]: ---------- Configuration ---------- 2026-09-29T12:01:40.601+0200, [PLC2]: Open communication successful 2026-09-29T12:01:40.601+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC1]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulId = 0, m_pPlcConfig->pszName = PLC1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulWaitTime = 12000, m_pPlcConfig->ulReconnectTime = 10000 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->pszProjectName = ZE_PC01 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.601+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC2]: ---------- Configuration ---------- 2026-09-29T12:01:40.601+0200, [PLC3]: Open communication successful 2026-09-29T12:01:40.601+0200, [PLC2]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulId = 1, m_pPlcConfig->pszName = PLC2 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulWaitTime = 10000, m_pPlcConfig->ulReconnectTime = 15000 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->pszProjectName = ZE_PC02 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->pszInstance = TCPIP_0_102_ 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.601+0200, [PLC2]: parameter0 = Address, value0 = 192.168.0.102 2026-09-29T12:01:40.601+0200, [PLC2]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.601+0200, [PLC2]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.601+0200, [PLC2]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.601+0200, [PLC2]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.601+0200, [PLC2]: ----------------------------------- 2026-09-29T12:01:40.601+0200, [PLC2]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.602+0200, [PLC1]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC1]: m_pDeviceDesc->pszInstance = TCPIP_0_101 2026-09-29T12:01:40.602+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.602+0200, [PLC3]: ---------- Configuration ---------- 2026-09-29T12:01:40.602+0200, [PLC3]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulId = 2, m_pPlcConfig->pszName = PLC3 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulWaitTime = 10000, m_pPlcConfig->ulReconnectTime = 15000 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->pszProjectName = ZE_PC03 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->pszInstance = TCPIP_0_103_ 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.602+0200, [PLC3]: parameter0 = Address, value0 = 192.168.0.103 2026-09-29T12:01:40.602+0200, [PLC3]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.602+0200, [PLC3]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.602+0200, [PLC3]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.602+0200, [PLC3]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.602+0200, [PLC3]: ----------------------------------- 2026-09-29T12:01:40.602+0200, [PLC3]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.603+0200, [PLC1]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.603+0200, [PLC1]: parameter0 = Address, value0 = 192.168.0.101 2026-09-29T12:01:40.603+0200, [PLC1]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.603+0200, [PLC1]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.603+0200, [PLC1]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.603+0200, [PLC1]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.603+0200, [PLC1]: ----------------------------------- 2026-09-29T12:01:40.603+0200, [PLC1]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.623+0200, [PLC2]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC3]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC1]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC1]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.623+0200, [PLC3]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.625+0200, [PLC2]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.850+0200, * ERROR: [PLC2]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:40.850+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:40.851+0200, [PLC2]: Open communication successful 2026-09-29T12:01:40.851+0200, [PLC2]: Starting adding new symbols 746... 2026-09-29T12:01:40.852+0200, [PLC3]: Open communication successful 2026-09-29T12:01:40.852+0200, [PLC3]: Starting adding new symbols 1168... 2026-09-29T12:01:40.875+0200, [PLC2]: Adding symbols finished 2026-09-29T12:01:40.875+0200, [PLC2]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:40.881+0200, [PLC3]: Adding symbols finished 2026-09-29T12:01:40.881+0200, [PLC3]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:45.928+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:45.928+0200, [PLC1]: Open communication successful 2026-09-29T12:01:45.929+0200, [PLC1]: Starting adding new symbols 499... 2026-09-29T12:01:45.933+0200, [PLC1]: Adding symbols finished 2026-09-29T12:01:45.933+0200, [PLC1]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:46.110+0200, OPC-Server started successful. 2026-09-29T12:01:50.625+0200, [PLC1]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:50.625+0200, [PLC1]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:55.625+0200, [PLC2]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:55.625+0200, [PLC2]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:01:55.699+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:55.699+0200, [PLC1]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:01:59.341+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:59.341+0200, [PLC2]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:02:00.626+0200, [PLC1]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:00.626+0200, [PLC1]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:05.700+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:05.700+0200, [PLC1]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:10.626+0200, [PLC3]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:10.626+0200, [PLC3]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.626+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.627+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:15.693+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:15.693+0200, [PLC3]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:20.627+0200, [PLC1]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:20.627+0200, [PLC1]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:25.626+0200, [PLC2]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:25.626+0200, [PLC2]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:25.699+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:25.699+0200, [PLC1]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:30.629+0200, [PLC1]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:30.629+0200, [PLC1]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:30.675+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:30.675+0200, [PLC2]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:34.710+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:34.710+0200, [PLC1]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:02:40.627+0200, [PLC2]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:40.627+0200, [PLC2]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.628+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.630+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:02:44.711+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:44.711+0200, [PLC2]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:50.631+0200, [PLC1]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:02:50.631+0200, [PLC1]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.628+0200, [PLC2]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:55.628+0200, [PLC2]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.629+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:02:55.690+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:02:55.690+0200, [PLC1]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:02:59.692+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:59.692+0200, [PLC2]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:03:00.632+0200, [PLC1]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:00.632+0200, [PLC1]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:04.716+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[9]: FAILED! 2026-09-29T12:03:04.716+0200, [PLC1]: CPLCHandler: Reconnect[9]: Reconnect cycle end 2026-09-29T12:03:10.628+0200, [PLC2]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:03:10.628+0200, [PLC2]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.629+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:03:10.632+0200, [PLC1]: CPLCHandler: Reconnect[10]: Reconnect cycle begin... 2026-09-29T12:03:10.632+0200, [PLC1]: CPLCHandler: Reconnect[10]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.632+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[10]: FAILED! 2026-09-29T12:03:10.633+0200, [PLC1]: CPLCHandler: Reconnect[10]: Reconnect cycle end 2026-09-29T12:03:14.762+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:03:14.762+0200, [PLC2]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:03:20.634+0200, [PLC1]: CPLCHandler: Reconnect[11]: Reconnect cycle begin... 2026-09-29T12:03:20.634+0200, [PLC1]: CPLCHandler: Reconnect[11]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:24.730+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[11]: FAILED! 2026-09-29T12:03:24.730+0200, [PLC1]: CPLCHandler: Reconnect[11]: Reconnect cycle end 2026-09-29T12:03:25.630+0200, [PLC2]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:03:25.630+0200, [PLC2]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:25.631+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:03:29.742+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:03:29.742+0200, [PLC2]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:03:30.635+0200, [PLC1]: CPLCHandler: Reconnect[12]: Reconnect cycle begin... 2026-09-29T12:03:30.635+0200, [PLC1]: CPLCHandler: Reconnect[12]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:34.717+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[12]: FAILED! 2026-09-29T12:03:34.718+0200, [PLC1]: CPLCHandler: Reconnect[12]: Reconnect cycle end 2026-09-29T12:03:40.630+0200, [PLC2]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:40.630+0200, [PLC2]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.631+0200, [PLC3]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:40.632+0200, [PLC3]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.632+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[9]: FAILED! 2026-09-29T12:03:40.632+0200, [PLC3]: CPLCHandler: Reconnect[9]: Reconnect cycle end 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: Reconnect cycle begin... 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.637+0200, * ERROR: [PLC1]: CPLCHandler: Reconnect[13]: FAILED! 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: Reconnect cycle end Ich kenne mich nicht so gut aus mit dem Thema OPC. Aber bis vor dem Windows Update hat es funktioniert.. Bin mit meiner Fehlersuche langsam am Ende...!
Last updated: 2026-09-29

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hi, maybe this fixes your problem. At least this was our issue back then. We tried to run the codesys runtime environment on an embedded Linux system. The problem on our side was that we changed the WORKDIR directory in the /etc/init.d/codesyscontrol script to /home/user/codesys, but we forgot to copy all files (including the hidden files) from the initial WORKDIR (I am not sure but I guess the initial WORKDIR was /var/opt/codesys) to the new one. After copying those files and restarting codemeter and codesyscontrol, we were able to upload licenses. Hope this help BR Josef
Last updated: 2024-07-10

Post by fredruel on ModbusServer became unreachable if reach maximum of 16 byClientConnections ^{CODESYS Forge talk (Post)}
Hello Fraziersedge, the solution of Codesys might be to update your codesys to the lastest version but it was not possible for us. In our Codesys V3.5 SP9 patch 8 I was able to fix this bug. I change my ModbusTCP slave component version or one of the sub component version (ex: SysSocket). Look at the picture in attachement that's the receipe that have work for us. When I got the bug my version of ModbusTCP slave was 3.5.5.0 with SysSocket at 3.5.6.0 and I change to ModbusTCP slave 3.5.14.0 with same version 3.5.14.0 of SysSocket event if I still use codesys V3.5 SP9 patch 8.
Last updated: 2024-08-27

Post by pistola on Case Function - Multiple Conditions, Is it possible? ^{CODESYS Forge talk (Post)}
Looking at the help (https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_st_instruction_case.html). I don't think it is possible but I figured I'd ask. I'm looking at have a case that evaluates two variables, instead of having multiple If Else statements I was hoping I could just use a case. Example * Case Var1 & Var 2 of 10 & 10: Instruction Code 10 & 20: Instruction Code 20 & 20: Instruction Code End_Case Obviously I tried typing as noted above and Codesys threw an error. But I was wondering if there was a different way of programming to make something like this work? If not I'll just use a bunch of If Else Statements, Thanks.
Last updated: 2024-11-03

Post by bjarne-pagaard on Global Variables ^{CODESYS Forge talk (Post)}
Old thread, I know - but it still has good answers. I would like to add a bit of info to it, as I was having a problem that lead me to this thread, but didn't give an exact answer. I am porting a project to a different PLC architecture. (Wago PFC300) A GVL named 'GVL' in the POUs section of my project was shadowed by a PLC-specific library in the Application->Library Manager. So all the existing references in the device specific code to 'GVL.something' would not resolve. Right-clicking the GVL in the code and 'Go to definition' would point me to the library in the Application Library Manager. All I had to do from there, was right-click the library, and set the property 'Only allow qualified access to all identifiers' in the library.
Last updated: 2025-04-11

Sort by relevance or date