Post by mubeta on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Thank you for your interest. Your answers are in line with what I knew, so at least it comforts me that I did not misinterpret the situation. However, I don't have an exact match as, for this project over the past few days I have: 1) I have gone back to leaving the various FBs of the motion always called, all of them, and in the state machine I use a boolean to activate the various useful Execute. (But in the future I want to go back and try the programming technique with which I wanted to develop this project); 2) For the occasional error: SMC_FB_WASNT_CALLED_DURING_MOTION perhaps it was due to the fact that I had set the Ethercat bus synchronism only at the CAN master level, but not at the level of individual drives. I have now also activated it for the individual drives and it does indeed seem to have been resolved, but having also adopted the programming technique mentioned in point 1), I cannot say whether this was the solution to the problem, or instead the previous point. Is there an error ‘regulator or start not set’ in the device log before the error ‘motion generating FB wasn't called for at least one cycle’? I can't answer that right now. By now the machine is running and I am no longer there, at this one. Also, I seem to remember that the 'fbeFBerror' drive structure (5-element array), does not cycle, BUT ONCE THE 5 EVENTS AFTER SWITCHING ON, IT DOES NOT UPDATE ANYMORE (but that's another issue), so diagnostics were not easy.
Last updated: 2024-07-24

Variables $placeholders$ in visualisations, like in v.2.x ? ^{CODESYS Forge talk (Thread)}
Variables $placeholders$ in visualisations, like in v.2.x ?
Last updated: 2021-05-06

Post by nz-dave on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
HI I have had a project running for a few weeks and twice it has shut the program down due to this exception. exception[ProcessorLoadWatchdog] occurred in: App=[all], Task[all] I have to reboot (power cycle) the system to clear the exception. or remotely restart the application. Any ideas? Cheers
Last updated: 2024-11-16

onewire bus master stop working after 4.8.0.0 upgrade ^{CODESYS Forge talk (Thread)}
onewire bus master stop working after 4.8.0.0 upgrade
Last updated: 2023-09-21

no synchronization via field bus(Raspberry Sl softmotion) ^{CODESYS Forge talk (Thread)}
no synchronization via field bus(Raspberry Sl softmotion)
Last updated: 2018-05-29

CANbus Status Bus Load (and other values) not updating ^{CODESYS Forge talk (Thread)}
CANbus Status Bus Load (and other values) not updating
Last updated: 2020-11-12

KNX-Bus läuft nicht mehr nach Update 3.5.16 auf 3.5.18 ^{CODESYS Forge talk (Thread)}
KNX-Bus läuft nicht mehr nach Update 3.5.16 auf 3.5.18
Last updated: 2022-08-28

EtherCAT and Profinet Field bus on CodeSys V3.3 ^{CODESYS Forge talk (Thread)}
EtherCAT and Profinet Field bus on CodeSys V3.3
Last updated: 2009-03-20

Can Bus Teilnehmer mit einer Steuerung simulieren... ^{CODESYS Forge talk (Thread)}
Can Bus Teilnehmer mit einer Steuerung simulieren...
Last updated: 2012-06-06

CoDeSys SM 3.4.3 with ServoC CAN bus slaves via EtherCat ^{CODESYS Forge talk (Thread)}
CoDeSys SM 3.4.3 with ServoC CAN bus slaves via EtherCat
Last updated: 2011-07-08

1-Wire, ID eines Bus Teilnehmers über Variable setzen ^{CODESYS Forge talk (Thread)}
1-Wire, ID eines Bus Teilnehmers über Variable setzen
Last updated: 2015-09-28

Wago 758-870 keine Komunikation im K-Bus ^{CODESYS Forge talk (Thread)}
Wago 758-870 keine Komunikation im K-Bus
Last updated: 2012-11-27

Wago PFC200 With Codesys 3.5 CanOpen bus failure ^{CODESYS Forge talk (Thread)}
Wago PFC200 With Codesys 3.5 CanOpen bus failure
Last updated: 2019-02-26

Profinet bus not running on Raspberry pi Codesys Runtime ^{CODESYS Forge talk (Thread)}
Profinet bus not running on Raspberry pi Codesys Runtime
Last updated: 2021-04-22

CoDeSys connecting with CAN Bus J1939 Module Parameters ^{CODESYS Forge talk (Thread)}
CoDeSys connecting with CAN Bus J1939 Module Parameters
Last updated: 2011-09-07

CanOpen - Bus läuft nicht ab bestimmter Teilnehmeranzahl ^{CODESYS Forge talk (Thread)}
CanOpen - Bus läuft nicht ab bestimmter Teilnehmeranzahl
Last updated: 2021-02-23

Are there any Codesys PLC's that support GE's C-BUS? ^{CODESYS Forge talk (Thread)}
Are there any Codesys PLC's that support GE's C-BUS?
Last updated: 2017-07-31

Runtime PLCNext and working with a vendor specific bus ^{CODESYS Forge talk (Thread)}
Runtime PLCNext and working with a vendor specific bus
Last updated: 2019-09-16

Can Bus API Raspberry Pi cyclic send and receive ^{CODESYS Forge talk (Thread)}
Can Bus API Raspberry Pi cyclic send and receive
Last updated: 2021-09-01

Modbus RTU Master does not work: bus error ^{CODESYS Forge talk (Thread)}
Modbus RTU Master does not work: bus error
Last updated: 2018-03-05

EtherCAT Master schreibt auf Bus, liest aber nicht. ^{CODESYS Forge talk (Thread)}
EtherCAT Master schreibt auf Bus, liest aber nicht.
Last updated: 2022-03-31

Bibliothek für den MCP23S17 am SPI-Bus gesucht ^{CODESYS Forge talk (Thread)}
Bibliothek für den MCP23S17 am SPI-Bus gesucht
Last updated: 2015-03-08

CAN-Bus .dbc file editing and loading ^{CODESYS Forge talk (Thread)}
CAN-Bus .dbc file editing and loading
Last updated: 2022-03-11

Addressing Beckhoff KL Terminals with BK9100 Bus Coupler ^{CODESYS Forge talk (Thread)}
Addressing Beckhoff KL Terminals with BK9100 Bus Coupler
Last updated: 2021-11-02

Joystick, Game Controller, PCI Bus, No driver found ^{CODESYS Forge talk (Thread)}
Joystick, Game Controller, PCI Bus, No driver found
Last updated: 2014-04-08

Sort by relevance or date