Post by koehler on Codesys 3.5.12 Module not Found ^{CODESYS Forge talk (Post)}
Hi there, I am getting troubles with a project. In the Hardware configuration I got some Lenze drives 9400. One of them got as status " Module not Found". Connection are good. ID Node of the Canopen network is also good. I don't find any reason for this status, nor any options to check.
Last updated: 2024-04-17

Post by eschwellinger on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
As I see from your logs I think the Timeprovider is not accurate enough in your case. Things to check - at the moment you run it on the same device? (for tesing purpose ok) I would set 127.0.0.0 as IP and set it not really to Core 0 ( many other stuff is there)
Last updated: 2025-11-20

Post by jvfred on CodesysHMI.exe: Start Error ^{CODESYS Forge talk (Post)}
I have used Codesys HMI SL on several projects. Today I turned my PC on to start building another project and received the following error message when I tried to start my device: "CodesysHMI.exe: Start Error One of the following licenses is required: CodeMeter 101597:13 Failure reason: CmContainer Entry not found, Error 200 CodeMeterAct 5000304:13 Failure reasons: CmContainer Entry not found, Error 200" I have tried reloading HMI SL and even updated to the current version with no success. I am using HMI SL version V3.5.20.10. Any help would be greatly appreciated.
Last updated: 2024-11-01

Post by jvfred on CodesysHMI.exe: Start Error ^{CODESYS Forge talk (Post)}
I have used Codesys HMI SL on several projects. Today I turned my PC on to start building another project and received the following error message when I tried to start my device: "CodesysHMI.exe: Start Error One of the following licenses is required: CodeMeter 101597:13 Failure reason: CmContainer Entry not found, Error 200 CodeMeterAct 5000304:13 Failure reasons: CmContainer Entry not found, Error 200" I have tried reloading HMI SL and even updated to the current version with no success. I am using HMI SL version V3.5.20.10. Any help would be greatly appreciated.
Last updated: 2024-11-01

Post by eschwellinger on Ethercat scan for devices not picking up EL7041 as a softmotion axis ^{CODESYS Forge talk (Post)}
Add existing version (with SM drive) - without scan - disable under expert settings in the slave the revision check.
Last updated: 2023-09-03

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
check 'uname -a' by ssh connection - addtional you'll probaly find the reason for not running with application by 'cat /var/opt/codesys/codesyscontrol.log' incase you are using 4.9.0.0 runtime version
Last updated: 2023-09-13

Post by eschwellinger on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
Which plc is this - seems that the performance of this device is not enough. You could check the plcload in the plcshell by 'plcload'
Last updated: 2024-11-17

Post by eschwellinger on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
should work, could you please check on the target: top if the the gateway is running -> you should see codesysedge.bin and cat /var/opt/codesysedge/codesysedge.log
Last updated: 2025-01-07

Post by rushikeshsonone on Get the list of all languages from TextList or from font settings of visualmanager ^{CODESYS Forge talk (Post)}
Hi, I want list of all languages added in text list during runtime. I check with various object call but no luck. Can you help me with that? Note - I can not using Textlistutil, need other solution
Last updated: 2025-03-04

Post by eschwellinger on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
in case you are using latest hw revision, there have been added some mac adresses - for the 4.17.0.0 release this might solve it. If not we need to investigate deeper. If it is application related you need to check the plclogger.
Last updated: 2025-09-02

Post by timvh on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
I'm not sure, but maybe you have to configure the 750-652 first with the WAGO-IO-CHECK software to set it in RS485 mode?
Last updated: 2024-02-27

Post by amira on Visu 4.9.1 auto-logon/login ^{CODESYS Forge talk (Post)}
Hello Julian, could you please check in Chrome Password Manager Settings if the option "Offer to save passwords" is set? With this option selected, a pop-up message will then show up asking whether or not to save the password. Choose OK. Hope this helps.
Last updated: 2026-01-14

CODESYS Control Win SL: Error Preparation was not successful: could not open network adapter ^{CODESYS Forge talk (Thread)}
CODESYS Control Win SL: Error Preparation was not successful: could not open network adapter
Last updated: 2023-05-19

Could not save the project: Could not find part of the path ^{CODESYS Forge talk (Thread)}
Could not save the project: Could not find part of the path
Last updated: 2014-09-10

Post by j-page on I have errors while building the project ^{CODESYS Forge talk (Post)}
I updated the Codesys version from “V3.5 SP20” to “V3.5 SP20 Patch1” and that solved the problem.
Last updated: 2024-10-15

Post by mgray on Restoring License ^{CODESYS Forge talk (Post)}
Need help restoring Codesys Runtime license. Customer updated the machine hardware, and license no longer works.
Last updated: 2025-06-26

Post by mgray on Restoring License ^{CODESYS Forge talk (Post)}
Need help restoring Codesys Runtime license. Customer updated the machine hardware, and license no longer works.
Last updated: 2025-06-26

Post by mgray on Restoring License ^{CODESYS Forge talk (Post)}
Need help restoring Codesys Runtime license. Customer updated the machine hardware, and license no longer works.
Last updated: 2025-06-26

Post by mgray on Restoring License ^{CODESYS Forge talk (Post)}
Need help restoring Codesys Runtime license. Customer updated the machine hardware, and license no longer works.
Last updated: 2025-06-26

Post by mgray on Restoring License ^{CODESYS Forge talk (Post)}
Need help restoring Codesys Runtime license. Customer updated the machine hardware, and license no longer works.
Last updated: 2025-06-26

Post by masmith1553 on no_assign C0540 message ^{CODESYS Forge talk (Post)}
I am receiving warnings for no assign warning messages after I updated my project from SP18 to SP19. How do I fix these warnings?
Last updated: 2024-01-25

Post by yann2021 on Errors by Code Generate ^{CODESYS Forge talk (Post)}
Hello, I updated to Patch 6 and can now build without any errors! Thanks!
Last updated: 2024-02-18

Post by valenting on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
Update : I updated my project's compiler version to the latest and it finally works
Last updated: 2024-04-29

Post by aldo on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
I have everything updated to the latest versions, but the problem persists. Thanks
Last updated: 2025-12-10

PFC200 4.5.0.0 License not detected ^{CODESYS Forge talk (Thread)}
PFC200 4.5.0.0 License not detected
Last updated: 2023-05-10

Sort by relevance or date