Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
I am using the codesys V3.5 patch 7 64 bit. I have to write the python script for running the static analysis with loading standard rule .CSA file. how can we load the .csa rules file before running the static analysis command.
Last updated: 2024-08-05

Post by abrarsk on SysCom Library Usage ^{CODESYS Forge talk (Post)}
Hello all, I am facing issues with using SysCom library. With SysCom23 library things were simple but since we are migrating to 64bit systems, I am writing a Porting program. With SysCom23, opening the comport was as simple as providing the ComPort no. which returns the Handle as a DWORD. dwHandle:=SysComOpen(Port); But the new library is a bit different. It is asking for 2 input parameters to open the Com Port - Port Number and POINTER to RTS_IEC_RESULT IF hCom = 0 THEN hCom := SysComOpen(ComSettings.sPort, ADR(pResult)); How should I use the RTS_IEC_Result? I can find RTS_IEC-REUSLT under SysType2Interfaces of SysCom library. Also, can someone give me a general understanding of this RTS_IEC_REULT and RTS_IEC_HANDLE, etc.?
Last updated: 2024-08-05

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Hello, Thank you for your response. In my application i use ethercat and while work i do not turn off power. After relative move motor is in standstill. As you suggest I suppose that problem is in drive setting but i do not see any option about increase standstill torque. Below i posted some photos from drive setting manager - PSD Servomanager Do you see any settings responsible for standstill torque? thank you
Last updated: 2024-08-05

Post by mubeta on parker servo and position ^{CODESYS Forge talk (Post)}
With this kind of motor nominal tourque I can belive that it can be moved very easy. 1,6 Nm is, for example, the torque required for unscrew a small loose cap from a bottle.
Last updated: 2024-08-05

Post by abrarsk on SysCom Library Usage ^{CODESYS Forge talk (Post)}
Link to library: https://content.helpme-codesys.com/en/libs/SysCom/Current/index.html
Last updated: 2024-08-05

Post by flappyman on licenses question ^{CODESYS Forge talk (Post)}
I hope this tread will be able to help me. I got your new licenses and it was working perfectly fine. Unfortunately, my PLC got severely damaged and it can not run anymore. Is it possible to somehow release the license so I could use it again. I have all information for the device and can provide it.
Last updated: 2024-08-05

licenses question ^{CODESYS Forge talk (Thread)}
licenses question
Last updated: 2024-08-05

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Ok, it is clear. But Is it normal when i move shaft by hand actual position stops?
Last updated: 2024-08-05

Post by bernhardw on Probleme mit MC_HALT_SML und MC_STOP_SML ^{CODESYS Forge talk (Post)}
Hallo … ich verwende: SoftMotionLight im Positions-Mode Ethercat-Bus Servoverstärker: Metronix BL4104-C . MC_HALT_SML funktioniert nicht zuverlässig (Achse fährt manchmal zu weit oder bis zum Softwareschalter) Ich habe festgestellt, dass intern beim Aufruf von Positions- auf Velocity-Mode umgeschaltet wird - und dann wird wahrscheinlich intern auf Drehzahl 0 abgeregelt. Kennt jemand dieses Problem? – der Wechsel der Betriebsart ja ist nicht verzögerungsfrei! MC_STOP_SML Der Baustein hat keinen Eingangsparameter "Deceleration" Die Achse stoppt und bleibt im Positions-Mode. Aber die Verzögerung ist nicht wie beschrieben: nicht "Objekt 6085h: quick_stop_deceleration" - sondern "Objekt 6084h: profile_deceleration" - aus zuvor aufgerufenem MC_MOVE_ABSOLUTE_SML Ich wäre dankbar für jeden Hinweis Gruß Bernhard
Last updated: 2024-08-05

Probleme mit MC_HALT_SML und MC_STOP_SML ^{CODESYS Forge talk (Thread)}
Probleme mit MC_HALT_SML und MC_STOP_SML
Last updated: 2024-08-05

Error in ScriptingEngine Docs - create_pou() ^{CODESYS Forge talk (Thread)}
Error in ScriptingEngine Docs - create_pou()
Last updated: 2024-08-05

Post by mubeta on parker servo and position ^{CODESYS Forge talk (Post)}
In general, drives have parameter sets to adjust behaviour in such cases: position recovery, adaptation with resistant torque, out-of-position window failure, etc. (Much depends on the type of configuration set for the axis: positioner, speed controller, torque controller, etc.). I have used that type of drive very little, in only two cases and a long time ago. To tell you what is normal is impossible. I know by reputation they are very simple objects, without too many pretensions and adjustments possible. Try running traces by monitoring actual position, motor current, torque and following error. These are the most sensible curves to understand what is going on. Maybe by fine tuning the motor tuning, the current controller or the speed controller you will get something closer to what you want. For example, from DS, the motor has a standstill torque of 3 Nm. Observe with traces whether this is effective: motor current trend. And afterwards, when you have your own accurate picture of the situation, you can also hear from the product's local support to see if you can steal a few more things from it performance-wise.
Last updated: 2024-08-05

Post by eguerra on Error in ScriptingEngine Docs - create_pou() ^{CODESYS Forge talk (Post)}
In the ScriptingEngine documentation there seems to be an error (or missing information) in the ScriptIecLanguageObjectContainer part ( https://content.helpme-codesys.com/en/ScriptingEngine/ScriptIecLanguageObjectContainer.html#ScriptIecLanguageObjectContainer.ScriptIecLanguageObjectContainer ). The description of the function create_pou() doesn't specify the correct arguments requested, it only says create_pou(type: SpecialPouType) and a script using the documentation definition of the function will raise an error. I tried passing the function arguments similar to the ones specified for the create_dut() function and it seems to work fine: create_pou(name, PouType) , name : str UPDATE: The offline help has the correct definition IExtendedObject<IScriptObject> create_pou( string name, PouType type = PouType.FunctionBlock, Nullable<Guid> language = null, string return_type = null, string base_type = null, string interfaces = null )
Last updated: 2024-08-05

Post by vladimirsmall on Send data to USB ^{CODESYS Forge talk (Post)}
Thank you on support
Last updated: 2024-08-05

Send data to USB ^{CODESYS Forge talk (Thread)}
Send data to USB
Last updated: 2024-08-05

Post by robert-o on Converting hex bytes to float ^{CODESYS Forge talk (Post)}
Try OSCAT_BASIC and Function DW_TO_REAL. DWORD_OF_BYTE my although help. The Lib is open and free. It is not necessary to add this Lib, you can use/copy the source code just to get an idea.
Last updated: 2024-08-05

Static Code Analysis ^{CODESYS Forge talk (Thread)}
Static Code Analysis
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Can you please help on my query below?
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Post by gauravthelkar on Static Code Analysis ^{CODESYS Forge talk (Post)}
Last updated: 2024-08-06

Sort by relevance or date