Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by jetme on Rampup and rampdown ^{CODESYS Forge talk (Post)}
i'm using FB Ramp_INT function to ramp my pump up and down but I will like to ramp up at a different time and also ramp down at a different time. How can I do that.
Last updated: 2024-03-28

Post by andrew-budaiev on Tank Level Display ^{CODESYS Forge talk (Post)}
If I want to display level in the tank, what's usual approach? Is there tank or vessel element I can use? I see there is bar display, but I can't make it fill the shape I need.
Last updated: 2024-04-03

Post by simonh on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
Hello, did you find the solution for the communication?Has the communication between the two been successful? if yes, can you please share me your solution since i have similar issue now. Thanks.
Last updated: 2024-04-04

Post by markosrod on Problem with the license of libraries IIoT ^{CODESYS Forge talk (Post)}
hello people, im having this issue when i try to validate the libraries. im using a device and a softcontainer. I tried with two different Keys and nothing. Please help with this.
Last updated: 2024-04-04

Post by correo0269 on Problems with Raspberry Pi - IoDrvGPIO library ^{CODESYS Forge talk (Post)}
Yes, but I want to use 1-wire and I2C and I am not able to do it due to those errors
Last updated: 2024-04-06

Post by mosayeb on Power off ^{CODESYS Forge talk (Post)}
Hello. It is interesting that almost everyone has faced this problem. Run the program as shown in the attached photo. Give True to the Enable input and change the status of the drive to on and off with Servo-On
Last updated: 2024-04-08

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by saugat10 on Cannot find existing placeholder ^{CODESYS Forge talk (Post)}
I have installed a library VisuUtils. As you can see in the picture it cannot find the reference to System_VisuElemBase though it is indeed present. How can i resolve this issue?
Last updated: 2024-04-08

Post by squiggleypuff on Can't Add New Version of Modbus TCP Master ^{CODESYS Forge talk (Post)}
Turns out Modbus was working despite the pre-compiler errors; I was reading the wrong addresses of the slave device, which was why I was seeing all 0s. Thanks for ignoring me.
Last updated: 2024-04-09

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hi, I am facing the same issues. I've tried it with codesyscontrol version 4.10.0.0 (codemeter version 7.60.5625.503) and with version 4.11.0.0 (codemeter version 8.0.5967.500). @eschwellinger, can you send me also a preliminary version of it, please? Thanks in advance
Last updated: 2024-04-09

Post by mibkid17 on Ethernet Adapter message: Adapter configured. Open all connections ^{CODESYS Forge talk (Post)}
Trying to control 525 with codsys the info from C-4 section. i should input the value in user defined parameters? in the generic device
Last updated: 2024-04-09

Post by vincentger on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Any resolution on this? I have currently 75 channels in my project that i brought up from SP18, which means i am 65 Channels above the new limitation?
Last updated: 2024-04-09

Post by januar on Trend recording build error - the variable "arrTraceMgrVariablesImpl" is too large ^{CODESYS Forge talk (Post)}
Hi Adel, No, I just update all to the latest version and it is working. Kind regards, Januar
Last updated: 2024-04-10

Post by jaspergain on Application has invalid license metrics. ^{CODESYS Forge talk (Post)}
Hey did you update this project from an older version? I had an similair issue recently, and when I updated the Compiler Version in Project Settings the issue was resolved.
Last updated: 2024-04-10

Post by rmaas on Fieldbus has lost synchronicity ^{CODESYS Forge talk (Post)}
Hi, On a gantry system with 2 axis i am getting the following error: SMC_DI_FIELDBUS_LOST_SYNCRONICITY This happens random, sometimes it happens every 5 minutes and sometimes no error for 2 hours... The Setup: - Using codesys 3.5 SP20 with all latest libs... - Kontron AL Pi-Tron CM4 with Preempt realtime patch (Raspberry Pi 4) - Codesys runtime 4.11.0.0 (single core) - CODESYS Control for Raspberry Pi SL licensed - Softmotion + CNC + Robotics licensed - 2x Leadshine EL8-EC400 servo drives - Axis group for a 2-axis T-Gantry Ethercat network wiring: Ethercat master softmotion -> Beckhoff EK1100 -> Servo drive #1 -> Servo drive #2 Ethercat Cycle time = 4ms Max Jitter = 140~150 What i have tried so far: - changed the sync offset from 20% to 30% - changed ethercat task priority from 1 to 0 Running tasks: - Ethercat tast: Prio = 0, Interval = 4ms - Main task: Prio = 1, Interval = 8ms - Visu task: Prio = 31, Interval = 100ms - Softmotion planning task: Prio = 15, Freewheeling - 3 other default tasks that were created by AC_Persist Motion fb's are called in the ethercat task... Does anyone have an idea how to fix this? Any help is greatly appreciated!
Last updated: 2024-04-11

Post by joschi2804 on Licensing info not available. ^{CODESYS Forge talk (Post)}
Hello, I've added some additional log output. Maybe this helps in figuring out the root cause. I've turned logging and verbose mode on for the CodeMeterLin application and I get the error, that some entry is not found.
Last updated: 2024-04-11

Post by tim-roelant on Problem mit control runtime V3 und profinet ^{CODESYS Forge talk (Post)}
Hallo Edwin, ich arbeite mit 3.5 SP 19.20 Runtime control win 3 X64 in anhang ein paar bilder von die zustand
Last updated: 2024-04-11

Post by wiresplus on Remote connection to ifm PLC & HMI ^{CODESYS Forge talk (Post)}
I use these Teltonika routers with ZeroTier rather than OpenVPN - works better for me. I can show you how if you like?
Last updated: 2024-04-13

Sort by relevance or date