Post by vincentd on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
I had some help from Codesys to debug this problem. It seems there was a problem within the target (a bug?). I only used for a proof of concept. Possibly it will work with a new version of the target
Last updated: 2023-11-21

Post by baldeep on Codesys Raspberry Runtime 4.10.0.0 and RSM Utility 3.5.19.0 ^{CODESYS Forge talk (Post)}
I had been using Codesys Raspberry 4.9.0.0 Runtime for a Project with CAA File 3.5.19.0. But now with Update 4.10.0.0 and Raspberry pi 64 Bit.....i cannot compile my code as RSM Utility 3.5.19.0 is not recognised. Any help? Regards
Last updated: 2023-11-20

Post by annd on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
@pflot59: Thanks, I know this guide but there a slight differences in migrating from eCockpit or from Codesys SL. It is still fine as I wrote above. BR annD
Last updated: 2023-11-23

Post by gerdkoch on OPCUA Datasource, can not login... ^{CODESYS Forge talk (Post)}
Hi, please share your codesys ide version and the version of the communication addon. Do you use encrypted communication? Did the browsing in the ide work? Did you create the certificate for the client in the security screen? BR
Last updated: 2023-11-27

Post by nathant on Easiest RevPi PLC to configure HMI visualization with? ^{CODESYS Forge talk (Post)}
I'm worried that the Core SE (which I was originally going to go with) will not be straight foward in terms of setting up the HMI visualization. This is for an offline application, if that matters.
Last updated: 2023-11-28

Post by nathant on Easiest RevPi PLC to configure HMI visualization with? ^{CODESYS Forge talk (Post)}
I'm worried that the Core SE (which I was originally going to go with) will not be straightfoward in terms of setting up the HMI visualization. This is for an offline application, if that matters.
Last updated: 2023-11-28

Post by toffeebonbon on EL7041-0052 - does it run with EL7041 SoftMotion? ^{CODESYS Forge talk (Post)}
Good morning everyone. In my setup I am trying to use a couple of EL7041-0052 (the EL7041 variant without terminals for an encoder) to run stepper motors without feedback. When using the softmotion drivers for the EL7041 (Rev22 and Rev24, even selecting external feedback type doesn't work) the device log shows warnings for the corresponding hardware: "SDO write error 0x1 -> 0x8012:0x08 eError 0x1 AbortCode 0x6090011". 0x8012:0x08 is the register for the Feedback Type. My best guess was setting the the register value in the start parameters to zero, but the result is the same. What else can I try to get the hardware to work? I have screenshots attatched showing the running fieldbus and the log messages. EDIT: One clarification: the "device log" that shows the error is the PLC, not the ethercat terminal. The log of the terminal itself shows neither errors nor warnings. BR Robert
Last updated: 2023-11-29

Post by arundara on Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Post)}
Hello, I was trying to create a redundancy POC for our application where we read data from few modbus tcp devices. As there is a limitaion that modbus tcp device support only for single master device, we wanted to test how the variable sync happens in redundancy mode. For that i have used the redundancy sample code added a variable "b" under a condition. What i observed was while active controller is running, if passive controller is powerup, passive controller is able to sync all the data configured for redundacny. But after that the variable data which resided under a condition is not synching from active to passive controller. I have attached the image where i have highlighter the variable. Can some help me to understand how redundacny work in codesys soft plc and if there is a solution to sync variable which are under condition, please explain the same or suggestion to achieve the same. Hardware - Raspberry Pi (2 qty) Redundancy licence used - yes in both controllers. Codesys runtime - 4.9.0.0 Codesys software version - V3.5 SP19 if i have posted this question in wrong section, please do let me know in whcih section i have to post this question.
Last updated: 2023-12-01

Post by nizrahel on OpC UA server on Raspberry Pi 64 SL runtime ^{CODESYS Forge talk (Post)}
Hi all! I'm working on an home project using a Raspberry Pi 3 device with Codesys for Raspberry Pi 64 SL runtime. I would like to create the HMI interface with Siemens WinCC Unified (or Advanced) configuring the Raspberry as OPC UA server. I tryed everything, but I didn't find the way to let the OPC UA connection works using UaExpert. I tryed to use anonymous connection, authenticated connection and the ip address instead of the server name in the path connection. There is no way to connect to the OPC UA server and I was asking myself if this feature is really supported for the runtime version used. Another strange thing I noted, is that is not possible to quickly create an OPC UA certificate in the Security Screen, as show in any tutorials. I have correctly created the Symbol Configuration enabling the OPC UA feature. I attach to this topic some printscreen of the actual configuration (sorry for the italian language interface, but I didn't find the way to switch to english). Thank you very much in advance for your support and advices!
Last updated: 2023-12-03

Post by nathant on Saving variable values on power cycle (RevPi Connect) ^{CODESYS Forge talk (Post)}
Hello, this seems to be a known issue, but persistent/retain variables don't seem to work properly on RevPi devices. Is there a workaround to this? All I need is for a few configuration variables to be remembered through power cycle.
Last updated: 2023-12-03

Post by voffi on CODESYS Custom Build Step ^{CODESYS Forge talk (Post)}
Good morning! Is there a way to run a python script or something else automatically after CODESYS (3.5) did its build or before download? I am searching for something like the Custom Build steps in Visual Studio. Thank you! Voffi
Last updated: 2023-12-07

Post by voffi on documentation in function block ^{CODESYS Forge talk (Post)}
Using < br > did it for me in CODESYS 3.5.19 // 2023-12-05 Line 1<br> // 2023-12-06 Line 2<br> shows up in Library Manager with line breaks.
Last updated: 2023-12-07

Post by abjha1998 on Converting UINT into bytes and converting 2Bytes into UINT ^{CODESYS Forge talk (Post)}
Thank you for the reply. I got an error saying that MEM.PackBytesToWord(GVL.Actual_Speed_DUT_high,GVL.Actual_Speed_DUT_low) = u; is not a valid statement. Am I missing some library?
Last updated: 2023-12-08

Post by abjha1998 on Converting UINT into bytes and converting 2Bytes into UINT ^{CODESYS Forge talk (Post)}
Thank you for the reply. I got an error saying that MEM.PackBytesToWord(GVL.Actual_Speed_DUT_high,GVL.Actual_Speed_DUT_low) = u; is not a valid statement. Am I missing some library?
Last updated: 2023-12-08

Post by snhatton on Visu - changing auto-logout time ^{CODESYS Forge talk (Post)}
You could try using the VUM_UserGroup struct from the VisuUserManagement library. I haven't tried this, but there is a variable for tAutoLogout to set the logout time.
Last updated: 2023-12-11

Post by eschwellinger on Codesys Control for Raspberry Pi 4.10.0.0 - Raspberry Pi OS > 2023-12-05 ^{CODESYS Forge talk (Post)}
-> which PI? PI5 will be added to 4.11.0.0 version/release -> 2. on Raspberry PI OS lite - there seems to be an additional problem we will try to fix it too... till release.
Last updated: 2023-12-12

Post by smartcoco on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
I have also been troubled by this issue for a long time, to the extent that I have to implement a recipe management library myself. Codesys version used: 3.5.19.40
Last updated: 2023-12-16

Post by mavitia on Application based license problem - Modbus TCP ^{CODESYS Forge talk (Post)}
raspberry pi is running ubuntu, so it has the codesys control for linux arm 64 bit, IDE is 3.5.19, both were installed last week from the latest versions online, im currently out of the PC but will upload some evidence ASAP
Last updated: 2023-12-18

Post by oe2swm on Raspberry pi rt preempt ^{CODESYS Forge talk (Post)}
Hello, I tried very hard to get Raspberry working with RT PREEMPT Kernel, But still i cannot get it working. Is there someone who can provide a Image for Raspberry 3b or 4(4gb) Thanks a lot!
Last updated: 2023-12-25

Post by nadim4114 on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
Hi @andreal, Were you able to adapt a codesys runtime to your linux based device? I am planning on the same lines. we want to develop a small controller of 64IOs for our application. We want to adapt codesys runtime on our Arm processor based embedded linux boards.
Last updated: 2023-12-26

Post by lipton on Safety Cross-communication with network variables ^{CODESYS Forge talk (Post)}
I am currently engaged in research for a Codesys project that involves the establishment of communication between two or more Codesys safety controllers using safe communication protocols, would it be possibole ? /Best Regards
Last updated: 2023-12-29

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
I have now renamed my recipe to Parameter and now use SaveRecipeAs. The correct folder is displayed in the dialogue box, but the recipe is not saved. What could be the reason for this, write permissions? Recipe manager buggy?
Last updated: 2023-12-29

Post by naidureginald on creating a visualization table ^{CODESYS Forge talk (Post)}
hi all im trying to create a visualisation table for a axis alarms list. upon entering the data array, i recieve a message as attached. any help would be much appreciated.
Last updated: 2024-01-03

Post by eschwellinger on function block output ^{CODESYS Forge talk (Post)}
I think you should use a piece of hardware in between your drive (pulse/direction) and the plc like for example Beckhoff EL2521 - so Ethercat might be to choice if you need CNC and SoftMotion. EK1100 and EL2521
Last updated: 2024-01-05

Post by dkugler on Ramp function ^{CODESYS Forge talk (Post)}
The util.RAMP_INT and util.RAMP_REAL from Codesys have an input for the start value. What is the advantage of this OSCAT ramp instead of the Codesys util lib?
Last updated: 2024-01-10

Sort by relevance or date