Post by ellocco on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
Is it possible under CODESYS V3.5 SP18, to connect a split (german Leitungsverzweigung) with an existing block (e.g. AND-module)? Or to connect the output of an existing block to the input of an existing block (e.g. OR-block)? Any ideas? P.S.: Sorry for the german title, I do not know how modify the title.
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Ok, this is a test programme with ADS1115. It is currently configured for the TCA9548 muxboard. If you want to run the ADS1115 single, then change the settings to the default values: ‘Is Multiplex:’ False ‘Stage mux channel numbers:’ [0,0,0,0,0,0,0,0,0] It is also important that the libraries are installed correctly here. But should be in this project
Last updated: 2024-11-07

Post by ellocco on FUP: Ausgang eines existierenden Blocks mit dem Eingang eines existierenden Block verbinden ^{CODESYS Forge talk (Post)}
Ist es unter dem FUP-Editor von CODESYS V3.5 SP18 möglich, eine Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden? Oder den Ausgang eines existierenden Blocks mit dem Eingang eines existierenden Blocks (z.B. OR-Block) zu verbinden? Gibt es dazu Vorschläge?
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I took a look at your project. First of all, a Raspbery Pi4 is installed. You must use the GPIOs_A_B(GPIOs B+/Pi2). The error ULINT can't be set to IDINT.... with your project as well. If I change your project to ‘CODESYS_Control_for_Raspberry_Pi_SL’ the error is gone.
Last updated: 2024-11-09

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Sorry, wrong expression. You have a 64bit system, so do I. You can also use the 64bit runtime, but most bib and commands are 32bit and are not properly supported. I had read somewhere that there are problems with I2C. That's why I recommend switching to PI_SL and using the correct gpio.
Last updated: 2024-11-09

Post by bertcom on Converting each character to a string into ASCII ^{CODESYS Forge talk (Post)}
@TimvH, Thank you, i think this way i can seperate the complete string to characters. Next part of the topic is converting the characters to an ASCII code. Is there an standerd function in Codesys for this? I alredy searched a few hours for it on the internet. no succes.
Last updated: 2024-11-11

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I don't have a multiplexer so it very weird that it connects with that multiplexer. If i do a I2C scan on the PI terminal, i only get the device addresses 0x48 and 0x51. One for the ADC and one for RTC. I will try again with your libraries
Last updated: 2024-11-12

Post by rafaelbrito on Integration C Code ^{CODESYS Forge talk (Post)}
I tried to use C code in the library that I have been developing in the project, but without success. I tried to use the CODESYS Control SL Extension Package to generate XXXdep.h and XXXltf.h, but without success. Do you have a better example of how to generate these files and how to compile them?
Last updated: 2024-12-03

Post by reinier-geers on Energie price ^{CODESYS Forge talk (Post)}
On a website i can get the energie price. But how does that work in codesys? There is a video of Rest client. But i can find the HTTP library. If i type on my browser : https://enever.nl/api/stroomprijs_vandaag.php?token=ANWB i get {"status":"true","data":"Please provide a valid API token. More information at https:\/\/enever.nl\/prijzenfeeds\/","code":"2"}
Last updated: 2024-12-03

Post by reinier-geers on Energie price ^{CODESYS Forge talk (Post)}
On a website i can get the energie price. But how does that work in codesys? There is a video of Rest client. But i can find the HTTP library. If i type on my browser : https://enever.nl/api/stroomprijs_vandaag.php?token=ANWB i get {"status":"true","data":"Please provide a valid API token. More information at https:\/\/enever.nl\/prijzenfeeds\/","code":"2"}
Last updated: 2024-12-03

Post by csu-chris on Colors look different when logged in and running ^{CODESYS Forge talk (Post)}
I am running CODESYS V3.5 SP19 Patch 2 (64-bit) I have buttons that are supposed to be either red or green depending on status. When I am logged out the colors look right. When I am logged in and running the colors are completely different and I can't understand why.
Last updated: 2024-12-06

Post by daniel on Codesys Tools Update Raspberry ist nicht vorhanden aktualisieren im Geraete ansicht geht auch nicht ^{CODESYS Forge talk (Post)}
Guten Tag, ich habe das gleiche Problem nur mit der 20.4 Version. Über den Installer habe ich alles installiert allerdings erscheint bei mir unter Tools nicht die Möglichkeit den Raspberry zu aktualisieren. Mit der 19.7 habe ich das gleiche Problem. Muss noch etwas anderes installiert werden? Kann mir jemand weiterhelfen? Grüße Daniel
Last updated: 2024-12-13

Post by dom4u on Using PEAK CAN PCIe card (IPEH-004040) with Codesys Control RTE V3 ^{CODESYS Forge talk (Post)}
The problem is that newer PeakCAN cards are with CAN FD support and SJA1000 compatibility isnt mentioned anymore on website. anyway, is it possibile to add a seperate entry for it in: [CmpSJACanDrv] ? Edwin, can you give us a hint how to format it?
Last updated: 2024-12-16

Post by winki on Not Possible to connect using control SL ^{CODESYS Forge talk (Post)}
Hello, I used to connect into my gateway using control SL tool 4.13, (it was called Update Linux.) I formated my computer, so today I install the new version of codesys and all package. Now I am not able to connect to my PLC using control SL. It says, check the status. Normally it used to worked perfectly before that.
Last updated: 2025-01-07

Post by timvh on PLCOpenXML Export/Import with Visualisation ^{CODESYS Forge talk (Post)}
A Task is a standard IEC 61131-3 object, so logically that you can export the VISU_TASK. A visualization is no standard IEC 61131-3 object, so not compatible with other IEC tools. Just use the standard export / import functionality. These files are not IEC compatible and can only be used in CODESYS. But these do support visu objects.
Last updated: 2025-01-09

Post by trusty-squire on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
Just a stab in the dark, but you might want to check the Dynamic Limits (accel, decel, velocity, jerk) in the Codesys SoftMotion device configuration, as well as checking similar limits on your servo drive? Are you seeing any errors, or does the MC_SetPosition FB get marked as complete?
Last updated: 2025-01-09

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
After correspondence with Mr Schwellinger from Codesys the resolution for this was to uninstall the SL 4.14 and install SL 4.13 on the device. Once this was done the licensing worked as expected. I noted that the container then showed a Version 3.00 and not 0.00.
Last updated: 2025-01-11

Post by jddaigle on Webvisu not supported due to missing browser feature HTML5-Canvas ^{CODESYS Forge talk (Post)}
Hello, I'm running the lastest version of Codesys 3.5 SP20 Patch 5, with the lastest version of Chrome. And I still get this "Webvisu not supported due to missing browser feature HTML5-Canvas" fallback with a quite simple webvisu containing some buttons, images, textboxed and a grid. What can I do? is that a configuration to change? Thanks!
Last updated: 2025-01-24

Post by jeffersonhui on SP20 Visualization Element Dynamic Colors ^{CODESYS Forge talk (Post)}
I am using Codesys SP20 patch 5 and in a visualization element, the "Color variables" section does not have a section to set up dynamic color values linked to variables. In a previous version (SP18), I get the option to add variables for Normal & Alarm state colors. Does anyone know how to get the dynamic color variables to work?
Last updated: 2025-02-19

Post by secundino on License ^{CODESYS Forge talk (Post)}
Good morning, I need to activate a CODESYS license on your website, as the computer where it was originally installed has been formatted. I have already sent two emails to store-support@codesys.com, but I have not received a response yet. Could you please assist me with this issue as soon as possible?
Last updated: 2025-02-20

Post by secundino on License ^{CODESYS Forge talk (Post)}
Good morning, I need to activate a CODESYS license on your website, as the computer where it was originally installed has been formatted. I have already sent two emails to store-support@codesys.com, but I have not received a response yet. Could you please assist me with this issue as soon as possible?
Last updated: 2025-02-20

Post by smic on put the Port number 80808 in Instance Setting of Deploy Control SL ^{CODESYS Forge talk (Post)}
I am using CODESYS V3.5 SP20 Patch 5. I am trying to use the Webvisu function on a PLC running on Docker. When I enter the port value 8080:8080 in the Instance Setting in Deploy Control SL, it is not saved. Can you please help me?
Last updated: 2025-02-21

Post by helcioburd on How long can a WSTRING be in CodeSys V3? ^{CODESYS Forge talk (Post)}
Thank you, very useful information. I did a library for serial communication and could not understand the reason only 256 chars could be read (after sending more than 256). Following your suggestion, I can now send any number of chars and everything will be received.
Last updated: 2025-03-02

Post by alawwirbilal on Codesys for raspberry pi 5 not working exactly ^{CODESYS Forge talk (Post)}
Hello, I have installed the runtime system on my raspberry pi 5 and when I scan for the devices it sees. But when I try to log in to the device it always ask me for a password and no matter what I give it says this is a wrong password. anyone could help?
Last updated: 2025-03-06

Post by wayne-riesterer on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
Thanks for your responses. I like to write the leanest possible code that I can because it makes it much easier to read/maintain/debug. OR_ELSE is what I was looking for. I wasn't sure if CodeSys short-circuited evaluation and I didn't realize this operator existed. Thanks!
Last updated: 2025-03-08

Sort by relevance or date