Post by marciohogenelst on stablish CAN communication through the PC's USB port
CODESYS Forge
talk
(Post)
I'm using Codesys v3.21SP4 on my PC via ControlWin to establish CAN communication through the PC's USB port. The software works fine. The CAN/USB converter works fine and is validated. However, there is no communication. Which folder and file should be modified to allow the CAN/USB converter to work and thus achieve the connection? Converter used: PCAN-View Information not yet processed: Access the folder: C:\Program Files (x86)\3S CODESYS\GatewayPLC\CODESYSControl.cfg Uncomment the line: Component.5=CmpPCANBasicDrv Any help would be appreciated.
Last updated: 2025-12-11
Post by hackehucke on Mithilfe von SysSocket eine Verbindung herstellen
CODESYS Forge
talk
(Post)
Hallo zusammen, vorweg: ich habe sehr sehr wenig Ahnung von Codesys, industrieller Kommunikation etc ... Ich soll für ein Seminar mithilfe der Library SysSocket eine HTTP Verbindung zwischen PC und und der Wago PFC200 herstellen, die wir hier im Labor haben. Ich habe mir unterschiedliche Examples von Codesys angeschaut, ChatGPT gepromptet etc. aber komme nicht in die Nähe von irgendwas, das funktioniert. Kann mir jemand ganz einsteigerfreundlich erklären, welche Bausteine ich benötige und was mit diesen getan werden müsste, um das ganze zum laufen zu bekommen? Wäre auf ewig dankbar ... Verzweifle hier langsam :( Viele Grüße
Last updated: 2026-01-07
Post by farren on Codesys complains about matching versions
CODESYS Forge
talk
(Post)
I'm building up a 2nd PC to match an existing developer PC. Installed the same SP and Patch levels but when I open a project that was created on the existing PC, Codesys complains that it's not the same version. Attaching a screenshot..... What else is there to match? Also, can all of the libraries that are on the existing machine be copied from it to the new machine and if so, how? (So I get the same versions) Which files/folders do I copy? Thanks! -Farren
Last updated: 2025-12-14
Post by charly29160 on WebVisu scaling regression in V3.5.22 P2: frame size jumps when switching visualizations
CODESYS Forge
talk
(Post)
Environment: - CODESYS V3.5.22 Patch 2 - CODESYS Control for Raspberry Pi MC SL - WebVisu in browser Problem: When switching between visualizations using a Register element (Registerkarten), the displayed frame size jumps incorrectly after returning to a previously viewed visualization. This behavior was introduced in V3.5.22 Patch 2. The same project worked correctly in V3.5.21 Patch 4. WebVisu settings in V3.5.21 (working): - Scaling: Isotropisch - Automatisch ermittelte Clientgröße verwenden: active - All visualizations: Automatisch erkannte Visualisierungsgröße Workaround?
Last updated: 2026-06-15
Post by luca03 on OPC UA information model into the Communication Manager
CODESYS Forge
talk
(Post)
Hello, unfortunately I am unable to load an OPC UA information model as a NodeSet2.xml file into the CODESYS Communication Manager. Importing via Tools -> OPC UA Information Model Repository still works, but when I try to load the model explicitly, CODESYS crashes without displaying an error message. Has anyone else encountered this problem, or does anyone have any suggestions? Thanks in advance
Last updated: 2026-08-22
Post by eschwellinger on cannot connect ot linux runtime: device does not answer the scanrequest
CODESYS Forge
talk
(Post)
for me looks like you do not use latest CODESYS IDE version, there is a known bug if you use a newer runtime your are forced to use a more complex password as user for the login. The old IDE version does not show this problem on login. so either update CODESYS or use a pw which meet the complexity requirements.
Last updated: 2026-06-11
Post by thomasgaab on EVC - issues assigning variables from VarGlobal lists
CODESYS Forge
talk
(Post)
Updated the Codesys Safety SIL2 package from v3.5.18.1 to v3.5.22.10 Codesys Version 64 3.5.18.0 After the update the assignment of variables from different VarGlobal lists was unstable. Selecting one group could cause another group to be deselected after code generation. I was unable to perform a compilation were all variables maintained the selection after code generation. Rolled back to the older version and the issue seem to be mostly solved.
Last updated: 2026-06-17
Post by caspershes on Checking the device tree, not just the code: what else is worth a static check?
CODESYS Forge
talk
(Post)
I spend most of my time reviewing other people's CODESYS projects before commissioning, and two kinds of defects keep showing up. Both compile clean. Both read fine. One is in the code. A pause timer whose own input gets cleared inside the branch the timer is supposed to gate: rampDelay(IN := run_2); IF NOT run_2 OR rampDelay.Q THEN run_1 := TRUE; run_2 := FALSE; // the timer's own input, cleared right here ELSE run_1 := FALSE; run_2 := FALSE; END_IF Next scan IN is FALSE, the timer resets, the condition is true again, and the second pump starts immediately. A 30-second ramp delay that actually lasts one task cycle. The setpoint is on the HMI, the operator turns it, and nothing changes. The other is not in the code at all. On one site the outdoor temperature read 0.0 °C in mild weather. The ST was correct, the variable was bound to the channel — but the channel's sensor type was left at "disabled", so nothing was ever digitised. Same class: a module with Disable_module = TRUE, or an analog output bound to a variable while its mode is off. Nothing in the project reports any of this, and the code review never looks there, because the configuration lives in the device tree and not in the POUs. That second class is what pushed me to parse the .export format rather than PLCopenXML alone — the export carries the device tree and the visualization, so "nothing ever writes this alarm variable" stops being a guess and becomes a fact you can check against the screen bindings. Three things about the format that cost me time, in case they save you some: the same device parameter can appear three times (template, internal copy, actual configuration) — the last occurrence is the one in effect; the enum value of a parameter is not in the parameter itself, it is one level down in BaseType/Value; a channel counts as used when a variable is bound to SensorValueN.SensorValue — InputStatus is a bad indicator, people deliberately bind it on spare inputs. So the question. What else would you check automatically, given both the code and the device tree? I am collecting rules from sites, not from style guides, and the configuration side feels largely unexplored. For what it is worth, the checker I use for this is free and runs offline (single exe, no install, nothing uploaded anywhere): https://github.com/caspershes/plc-lint — 43 rules at the moment, reads .export and PLCopenXML. Happy to add rules people here suggest.
Last updated: 2026-10-27
Post by jinlee on Dynamic I/Os Mapping
CODESYS Forge
talk
(Post)
Hi there, I will give it a try. Thank you very much.
Last updated: 2023-08-19
Post by vincentger on Raspberry Pi Control SL MC - Restoring License not working anymore!
CODESYS Forge
talk
(Post)
Running into the same problem restoring a Runtime 4.4.0.0 device on a now 4.8.0.0 device.
Last updated: 2023-08-21
Post by kreisfilho on Same program to more than one PLC
CODESYS Forge
talk
(Post)
Hi, How can I assign a monitor (non touch) connected to a Raspberry pi (via HDMI) as visualization output?
Last updated: 2023-08-23
How to call the same program from library and get the vars updated.
CODESYS Forge
talk
(Thread)
How to call the same program from library and get the vars updated.
Last updated: 2023-08-23
Post by smercante on Unable to Import PLC Open XML from Easy Remote IO
CODESYS Forge
talk
(Post)
Hello dear. I have the same problem. Could you solve it? Do you use GLV variables?
Last updated: 2023-08-24
Post by jegerjon on Same program to more than one PLC
CODESYS Forge
talk
(Post)
I guess you could archive the project, open the archive and go online. Is that suffiecient for your use case?
Last updated: 2023-08-25
Post by i-campbell on Ping By Name
CODESYS Forge
talk
(Post)
What library is that? Net Base Services Is there a version 9.2 ? I've not heard of a version 9.2
Last updated: 2023-08-25
Post by totorovic on CSVReaderInit returns error : INVALID_HANDLE
CODESYS Forge
talk
(Post)
Hello, Can we please have some details about the error : INVALID_HANDLE? So we can try to avoid it.
Last updated: 2023-08-28
How to configure CODESYSControl_User.cfg in order to use a specific network card for OPCUA Server
CODESYS Forge
talk
(Thread)
How to configure CODESYSControl_User.cfg in order to use a specific network card for OPCUA Server
Last updated: 2023-08-28
Post by reinier-geers on Trun off webvisu
CODESYS Forge
talk
(Post)
How do i see if Webvisu is active and how to shot down if i dont want webvisu?
Last updated: 2023-08-29
Post by timvh on eCockpit - unable to start simulation
CODESYS Forge
talk
(Post)
You need to start the application, see the "start" option at the top left (next to close simulation).
Last updated: 2023-08-31
Post by janderson on Ethercat scan for devices not picking up EL7041 as a softmotion axis
CODESYS Forge
talk
(Post)
also my ethercat bus won't run.
Last updated: 2023-09-02
Post by jegerjon on VPN
CODESYS Forge
talk
(Post)
Hi, witch VPN provider for remote PLC Acess do you use/recomend? Preferedbly one where you can Grant certain users acess to specific controllers.
Last updated: 2023-09-06
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.