Post by acc00 on Main Task cycle too long leading to PLC Fail ^{CODESYS Forge talk (Post)}
I have 2 Wago PFC200 PLC, running with Runtime SP19 Patch 5, with the Redundant application. The PLC communicates as Modbus Master with at this moment 15 Modbus Slaves -later there will be 28 in total- (Drives, Power management units,...). These devices are connected in 2 rings (1 ring of Drives, 1 ring of Power Management units), with 2 Managed Moxa Switches being part of the ring. Each PLC is connected to one of these switches. The issue I'm encountering is that the Cycle time of the Active PLC goes very high when I'm closing the Drive ring (simulating an issue on one Cabinet supply, resulting in that one Drive shut down, which can happen on field quite often). As a result of this long cycle, the PLC fails and goes to Exception, and the Passive PLC does not take control of the system. A normal cycle is around 30ms for the Main task, and a few ms for the Ethercat task. When I monitor with Profiler, I see that in this Maximum Cycle, the main Task is only taking 13ms, so I'm not sure where the PLC is hanging for so long. Is the remaining cycle time the Redundant management/sync or something else? Thank you in advance.
Last updated: 2024-03-08

OPC UA Client certificate for datasource link ^{CODESYS Forge talk (Thread)}
OPC UA Client certificate for datasource link
Last updated: 2024-03-08

Main Task cycle too long leading to PLC Fail ^{CODESYS Forge talk (Thread)}
Main Task cycle too long leading to PLC Fail
Last updated: 2024-03-08

Post by ryusoup on OPC UA Client certificate for datasource link ^{CODESYS Forge talk (Post)}
Hello, I'm looking for a way to set my client certificate, not one which self-signed cert generated with CODESYS, for OPC UA connection via datasource linking. Does anyone know how to archive that? BR,
Last updated: 2024-03-08

Post by bschraud on Zielsystem stimmt nicht mit dem verbundenen Gerät überein ^{CODESYS Forge talk (Post)}
Hallo, nach einer Umrüstung des RPi auf SSD habe ich den RPi neu aufgesetzt. Nach dem Installieren der Runtime (4.11.0.0 raspberry, all) auf den RPi kann ich das Gerät nicht mehr verbinden. Die Fehlermeldung lautet "Das gewählte Zielsystem 'Codesys Control for Raspberry Pi MC SL' stimmt nicht mit dem verbundenen Gerät 'Codesys Control for Raspberry Pi 64SL' überein. ID-Diskrepanz: Ausgewählt=000 0011, Online=0000 0012" Bei der Konfiguration des Laufzeitsystems kann man nur Multicore 64-bit (Aarch64) auswählen. Beim Aktualisieren des Gerätes im Gerätebaum habe ich Raspberry Pi MC SL in der Version 4.11.0.0 ausgewählt. Diese Version habe ich auch ausgewählt, weil nur diese Version für den produktiven Einsatz zugelassen ist. Die codesys Version ist frisch installiert, also 3.5.19.60 Vielen Dank für Ihre Hilfe
Last updated: 2024-03-08

Post by ph0010421 on Sending Sequential Modbus TCP Packets ^{CODESYS Forge talk (Post)}
Hello You'll need to write a proper sequence to send, then wait for confirmation, and then move on to the next step. Use the CASE statement in ST. It's perfect for creating a sequence.
Last updated: 2024-03-08

Post by eschwellinger on Zielsystem stimmt nicht mit dem verbundenen Gerät überein ^{CODESYS Forge talk (Post)}
in /etc/CODESYSControl.Usr.cfg [CmpRasPi] Architecture=aarch64 eintragen und im Projekt in CODESYS den Pi64 verwenden.
Last updated: 2024-03-08

Sending Sequential Modbus TCP Packets ^{CODESYS Forge talk (Thread)}
Sending Sequential Modbus TCP Packets
Last updated: 2024-03-08

Post by trycyclepower on Only single ehternet ip drive is communicating ^{CODESYS Forge talk (Post)}
Hi all, I have two ethernet IP drives not communicating together. If I disable one, then other one starts working. ENIPScnannerIOTak cycle is setup as 20ms. Also, PLC updating variables setting is on.
Last updated: 2024-03-08

Post by eschwellinger on Only single ehternet ip drive is communicating ^{CODESYS Forge talk (Post)}
which versions EIP & Runtime and which plc is this? Does it work if they are connected to one network interface?
Last updated: 2024-03-09

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Hello dear colleagues. I have an ESTUN PRONET servo. I'm trying to control via softmotion over the CANopen bus. There is no Ethercat bus in this servo model. In another project,using Ethercat , I controlled four axes. I have problems with ESTUN PRONET servos. A DSP-402 driver mismatch is likely. I would be very grateful for your help in solving this problem.
Last updated: 2024-03-10

Post by mp9876 on Attempting customizing menus fails in LADDER environment; due to free CODESYS version ? ^{CODESYS Forge talk (Post)}
Hello, I am attempting to get started here and bumping into this funny issue. I am using this version of CODESYS: ============================== DETAILED VERSION INFORMATION Created at 2024-03-10 ============================== Startup profile: ............................................................... CODESYS V3.5 SP19 Patch 6 OS version: .................................................................... Microsoft Windows NT 10.0.19045.0 .NET version: .................................................................. 4.0.30319.42000 When attempting to customize the menus or toolbar it does not work. The additional commands, Insert TON box & Insert TOFF box, are present in the Customize Menus or Toolbars when re-opening the Customize options but neither the menu or the toolbar gets updated with these. Would also like to add them in the Ladder Toolbox as there are only 9 items in there which does not include the one mentioned above. Due because of the version I am using ? Any assistance would definitely be appreciated. Thank you Mike
Last updated: 2024-03-10

Post by dhumphries on Attempting customizing menus fails in LADDER environment; due to free CODESYS version ? ^{CODESYS Forge talk (Post)}
You get fewer tools when you create a new POU and choose ladder diagram instead of ladder logic diagram. Create a new POU and select ladder logic diagram and you should find the additional tools you are looking for in the toolbox.
Last updated: 2024-03-11

Post by bschraud on Zielsystem stimmt nicht mit dem verbundenen Gerät überein ^{CODESYS Forge talk (Post)}
Der Eintrag in /etc/CODESYSControl.Usr.cfg war schon vorhanden. Bisher habe ich das Gerät Pi MC SL verwendet. Laut H. Zenker ist das die "Produktionsversion“ der Raspberry-Laufzeitumgebung. Gibt es kein MC SL Runtime Package mehr? Ist dieses in der Standardinstallation nicht mehr vorhanden und muss manuell installiert werden? Beim Wechsel auf Pi 64 kann ich nicht mehr kompilieren wegen folgender Fehlermeldung: "cmperrors interfaces, 3.5.5.0 (system): C0338: Die Bibliothek 'cmperrors interfaces, 3.5.5.0 (system)' wird nur in 32-Bit-Applikationen unterstützt" Vielen Dank für die Hilfe
Last updated: 2024-03-11

Post by acc00 on Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Post)}
Hi arundara, I'm also experimenting with Redundandcy. Is the sync variable function the following: "RedundancySynchronizeData()" ? Does the Task time increase a lot when you activate the sync function?
Last updated: 2024-03-11

Post by eschwellinger on Estun servo with codesys ^{CODESYS Forge talk (Post)}
you need to add the EDS file here to check..
Last updated: 2024-03-11

Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Thread)}
Variable Sync Issue In Soft Plc Redundancy
Last updated: 2024-03-11

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
The second motor: EMJ-08AFB24 and servodrive PRONET-08AMF, Thank you for your desire to help
Last updated: 2024-03-11

IP address of connected webvisu = 127.0.0.1 ^{CODESYS Forge talk (Thread)}
IP address of connected webvisu = 127.0.0.1
Last updated: 2024-03-11

Post by androidzz on Json Builder problem? ^{CODESYS Forge talk (Post)}
Dear reader, I am using the codesys JSON utilities SL, 1.9.0.0 library. And then specifically the FB JSONBuilder. I need to create a main object with at least 2 objects in it. The first object is no problem, but I cannot insert the second object into the main object. See attached my code and the result I get. I am assuming that I am doing something wrong with the parent index but have tried a lot and can't get it done. Kind regards, Rob
Last updated: 2024-03-11

Post by jinlee on IP address of connected webvisu = 127.0.0.1 ^{CODESYS Forge talk (Post)}
Hi, Did you manage to solve the problem ? I have the same issue of reading 127.0.0.1 only.
Last updated: 2024-03-11

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
My equipment: servomotor ESTUN PRONET EMJ-08ASB24, servodrive Pronet-08AMG
Last updated: 2024-03-11

Post by androidzz on Json Builder problem? ^{CODESYS Forge talk (Post)}
I found my problem. The parentIndex from a new object was not connected to the root parent index
Last updated: 2024-03-11

Json Builder problem? ^{CODESYS Forge talk (Thread)}
Json Builder problem?
Last updated: 2024-03-11

Post by niallel on How to change bHiresMode ^{CODESYS Forge talk (Post)}
Hi, I'm trying to get Scaling working on my axis. An increment produces 36.6mm of movement, so I want to put the units in application as 36.6. However the docs say that I need to change bHiresMode as it doesn't show me the option for Precision in the User Interface. I'm thinking that I need to change the precision so I can enter decimal places. How can I do this, or is my thinking wrong? Thanks,
Last updated: 2024-03-11

Sort by relevance or date