Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I succeed to change the device to PI_SL but still the same problem of the I2C device switching between running and not running. the only difference with your project is that yo use I2C_master device version 4.7.0 and i 4.7.13, for GPIO i also use the 4.7.13 version and you the 4.7.0. Can you send me the older version of the Raspberry PI pheripals library, because i cannot choose lower version then 4.7.10 for the GPIO and I2C_master device
Last updated: 2024-11-11

Post by eschwellinger on File Transfer Error 4 ^{CODESYS Forge talk (Post)}
Which plc type and which version?
Last updated: 2024-11-25

Post by eschwellinger on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
which runtime version and dies this device has an realtime kernel?
Last updated: 2024-12-28

Post by dkugler on STRING size and reading STRING with Modbus ^{CODESYS Forge talk (Post)}
Last updated: 2025-01-31

Post by eschwellinger on Exception when OPCUA datasource disconnects from Server ^{CODESYS Forge talk (Post)}
Which runtime version and which communication addon version?
Last updated: 2025-03-21

Post by johnbomb on Ignore Dependencies When Loading Package? ^{CODESYS Forge talk (Post)}
I'm trying to load a .package into Codesys 3.5.21, but the package is intended to only work with Codesys 3.5.18.0 and is configured with dependencies on the specific versions of other packages included with 3.5.18.0, and 21 has newer versions so the package will not install. I would like to install the package anyway to try and get things working on a newer Codesys version, since for some reason the installer for .18 errors out and doesn't fully work in my environment, but .21 seems to work fine.
Last updated: 2025-04-01

Post by eaglealex on Length of string and Array of bytes ^{CODESYS Forge talk (Post)}
Browser's bug... Sorry
Last updated: 2025-04-02

Post by dkugler on CODESYS v3.5 SP18 ^{CODESYS Forge talk (Post)}
click at "Filter" left from advanced and activate "all categories"
Last updated: 2025-04-17

Post by nxbp on Cam Editor And Cam Problem ^{CODESYS Forge talk (Post)}
Software Version Checked 1) V3.5.19.70 2) V3.5.21.10
Last updated: 2025-06-29

Post by attarzade on Servo motor as an slave and AC motor as an Mster ^{CODESYS Forge talk (Post)}
Hello, I would like to control a servo motor via EtherCAT as a slave axis, and have it follow a master axis that is driven by a Control Techniques C200 AC drive (ethercat communication).Could anyone help me with how to achieve this setup? I use codesys version 3.5.20 and crevis Ethercat cards. AC drive is master axis and Servo drive is slave axis Thanks in advance
Last updated: 2025-07-14

Post by voffi on Excel to Codesys 3.5 ^{CODESYS Forge talk (Post)}
Export excel file into csv format and then read into CODESYS.
Last updated: 2023-12-12

Post by eschwellinger on Eoe issues with Windows and Linux ^{CODESYS Forge talk (Post)}
guess it should be tap0
Last updated: 2023-12-19

Post by ph0010421 on Add device greyed out ^{CODESYS Forge talk (Post)}
Click on NET in the project tree and add it there.
Last updated: 2023-12-19

Post by svn123 on In Simulation Mode, logic is not executing ^{CODESYS Forge talk (Post)}
Please check the attached snapshot. I am converting an int to real and storing in rVlv01_SV and then scaling the value using LIN_TRAFO. In the bottom Status Bar of Codesys, both RUN and SIMULATION are visible. When I enter value 100 as input to INT_TO_REAL instruction and press Ctrl-F7, the value can be seen at the input but the logic seems not to work. I searched for help but could not find anything relevant. What could be the reason. Codesys ver3.5.11 svn
Last updated: 2023-12-25

Post by eschwellinger on Add licence ^{CODESYS Forge talk (Post)}
Which plc and in which version? Runtime Type? Runtime Version?
Last updated: 2024-01-05

Post by toby on SM Drive license error ^{CODESYS Forge talk (Post)}
Hi albert1999 and forest, I hope you are well. I too am wondering if you have found any solutions? Im working with a RPi and a Omron R88D-ETH servo amplifier. The SoftMotion is timing out after 30min without the license, but I cant figure out how to license it, and I seem to have some compatibility issues between my RPi license and any SoftMotion licenses. Did you guys have any luck? Thank you very much for any assistance offered. Toby
Last updated: 2024-01-10

Post by warrumungi on Beckhoff EL6652-0010 with Codesys ^{CODESYS Forge talk (Post)}
Hi Has anyone successfully used a Beckhoff EL6652-0010 Ethernet/IP slave terminal through an EK1101 EtherCAT coupler, or similar, and been able to set it up through Codesys? It seems there is no driver for it, and it can't be done? The only option would be to use the Ethernet/IP capability of the controller directly with one of its ethernet ports and a Codesys Ethernet/IP adapter + module and routing it through EtherCAT by tunnelling it through via an EL6614 switchport? Any advice would be appreciated. Billy.
Last updated: 2024-01-15

Post by ojz0r on INT_TO_WORD function not working ^{CODESYS Forge talk (Post)}
That calculation will not work the way you expect it to. If PumpFillSpeed is limitied to 0-50 then the only whole number would be 50/50 = 1 everything else is 0.0-0.9999... and since you are using word and integer only 50 would work since there is no representation for mantissa in integer values. Declare a temporary real variable and do the calculation and then do a REAL_TO_WORD in the DRV2Speed assignment.
Last updated: 2024-01-26

Post by wbj0t on System libs and I/O Drivers ^{CODESYS Forge talk (Post)}
Hi everyone. My question about: where I can learn (read or watch) an info about codesys workflow through the system IO libs? I want to know how to implement I/O drivers by my self. In the system libs I see many interfaces, methods etc... But there is no explanation about them, just names of methods and fields of the FBs. I know about this page: https://forge.codesys.com/drv/io-drivers/doc/Generic/ There is so BIG the device description file and not so clear explaining of the attributes and elements, also some elements or attributes missed at it all. Yes, there are code examples on this page, but, so shortly and, for example, code about Modbus drivers is absent. And even if I try to add the IoDrvFB with lib, I get and error, something like: "failed to load IoDrvFB driver". And what about the book of codesys that written by Gary Pratt? Is there information about system libs and drivers in this book more clearly? Thank you :)
Last updated: 2024-02-02

Post by ferrim on IEC 61499 ^{CODESYS Forge talk (Post)}
IEC 61499 is probably something more complex than what you have correctly said so the prospects are interesting but we cannot ignore that it came out almost 20 years ago and has not won many hearts. I started to explore this world with a PLCnext controller because I love these devices based on RT Linux and Codesys is somehow usable with them but I have made little progress and I feel like inside a nutshell in the middle of the sea ;-) Gary's voluminous and precious book is always on my desk...
Last updated: 2024-02-10

Post by eschwellinger on Raspberry and problem with runtime ^{CODESYS Forge talk (Post)}
will be solved with 4.11.0.0 release scheduled tor 20th February
Last updated: 2024-02-14

Post by jackbrady on Function Blocks and arrays of function blocks ^{CODESYS Forge talk (Post)}
Thanks for the reply. Much appreciated.
Last updated: 2024-02-15

Post by timvh on Automatic xExecute NBS.TCP_write ^{CODESYS Forge talk (Post)}
Use e.g. the condition: TCP_Connection_0.xActive AND NOT(TCP_Write_0.xDone)
Last updated: 2024-03-05

Post by pjoret on IFM CR711S Can Low Level Library Use ^{CODESYS Forge talk (Post)}
Hello, I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part. I already use it on the Standard part and it works properly. I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ? And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It. Have a nice Day.
Last updated: 2024-04-03

Post by yofi on Raspberry Pi 4 POU not running ^{CODESYS Forge talk (Post)}
I have this error where the pou doesn't run even for simple programs like contact and a coil if i remove the pou from the task and put another one it works for one run then it stops working again in the photo we can see a contact is on but the coil connected to it is still not on and the device is in run mode I had this issue again and again any help
Last updated: 2024-06-02

Sort by relevance or date