Post by sulzbrunn on Codeys Installation freezes while attempting to install packages ^{CODESYS Forge talk (Post)}
Hi, I am facing the same problem: I am trying to install CODESYS 3.5.17.60 The last log entries are: ... InstallShield 14:18:17: Done Initializing... InstallShield 14:18:17: Registering Msi Server... InstallShield 14:18:17: Invoking script function InstallOEMPackages 1: [CDS Info]: CDS_OEMPACKCOUNT: 47 1: [CDS Info]: CDS_OEMPACKCOUNTALL: 47 Action 14:18:17: CDSInstallOEMPackages. Install all Packages added to the setup 1: [CDS Info]: Call: C:\PROGRA~2\CODESY~1.60\CODESYS\Common\PACKAG~2.EXE --profile="CODESYS V3.5 SP17 Patch 6" --installAll="C:\Users\UserXXX\AppData\Local\Temp{94C03~1\Packages"
Last updated: 2026-03-19

Post by anhkdv on Motion FB Error ^{CODESYS Forge talk (Post)}
When I load the SMC_GroupWait command twice in a row into the buffer an error occurs when I try to MC_MoveLinearRelative in the dynamic coordinate system. If I use MC_MoveLinearAbsolute in the dynamic coordinate system, it still works
Last updated: 2023-10-23

Post by voffi on documentation in function block ^{CODESYS Forge talk (Post)}
Using < br > did it for me in CODESYS 3.5.19 // 2023-12-05 Line 1<br> // 2023-12-06 Line 2<br> shows up in Library Manager with line breaks.
Last updated: 2023-12-07

Post by strannik on SoftMotion SML ^{CODESYS Forge talk (Post)}
I use SoftMotion Light libraries in my CodeSys 3.5 project. Activated the license. But probably not all the actions were completed. In the configuration of the axes A message that the driver is running in demo mode. Please tell me what complete actions need to be performed. Thanks
Last updated: 2024-07-06

Post by akos on Soft motion kinematic zones ^{CODESYS Forge talk (Post)}
Hello Everyone, Is there any solution to define safety/forbidden zones in the coordinate system of the kinematics? Its not enough, to define only limits in my servo axes! I need zones in 3D! :) Thanks for the help!
Last updated: 2024-07-10

Post by trycyclepower on How to set unit in Axis ^{CODESYS Forge talk (Post)}
I am very new to Motion in Codesys. I have linear axis and would like to setup as mm, I want to move axis and control axis in mm, mm/s. How do I do that? I know my electronic gearing is 200000.
Last updated: 2024-08-29

Post by oudom on Missing Button State Variable ^{CODESYS Forge talk (Post)}
My CODESYS 3.5 SP16 Patch 4 in the visualization Button property missing a configuration Button state variable. How do we activate the Button State Variable in the visualization as shown in the attach document?
Last updated: 2024-10-04

Post by banialuk on Modbus TCP Server ^{CODESYS Forge talk (Post)}
Hello, I have poroblem with define input in function block modbusFB.serverTCP 'dataModel', in my aplication I need starting Input Registers from 3000, and I must define this in 'data Model' but I dont now how exacly to do it. Anybody now somethin about this?
Last updated: 2024-10-19

Post by etienneneu on TargetVisu controls are incorrectly positioned ^{CODESYS Forge talk (Post)}
Hello eschwellinger, what can I do if I need exactly this option to use the html5 controls, because I have the same problems with the displaced elements in WebVisu running in Internet Explorer. I have observed a different behavior in google chrome. Best regards, Etienne
Last updated: 2024-11-06

Post by timvh on File access operation denied ^{CODESYS Forge talk (Post)}
Go in Windows to this location. Right click on this file and go to properties. Is it in Read-only state? Then CODESYS cannot open in Write mode.
Last updated: 2024-11-09

Post by mg0815 on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
3.5.19.7 THANK YOU, 1000 times !!!! in german: Projekt/Projekteinstellungen/Visualisierung/Sichtbar - CLICK Danach * "Eigenschaften-Behandlung in allen Elementeigenschaften aktivieren" CLICK OFF - OK * "Eigenschaften-Behandlung in allen Elementeigenschaften aktivieren" CLICK ON - OK Danach sollte es gehen.
Last updated: 2025-06-27

Post by timvh on Unable to select VisuDialogs.Numpad in Open Dialog input configuration ^{CODESYS Forge talk (Post)}
You should not use the "open dialog" to change the value. Instead use the input configuration "Write Variable" to change a variable value in the visualization. in the setting of this input command, you can choose the Input type (select dialog).
Last updated: 2025-07-23

Post by timvh on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
In the device selection. Do not filter on Phoenix. Remove this filter and first add an Ethernet Adapter from CODESYS. To this Ethernet adapter add the Profinet Controller. After this you can filter on Phoenix devices in the "add device dialog".
Last updated: 2025-09-09

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
I have DINT data from drive input and would like to use this data in Bools in bunch of the FBs. I have tried using Union but it is not working. Please suggest
Last updated: 2023-12-14

Post by smartcoco on Bit / Bool data types in function parameters ^{CODESYS Forge talk (Post)}
Memory addressing is measured in bytes, with BOOL occupying one byte. BIT is quite unique as it occupies one bit. So, try not to use BIT in the program. You can use the Unpack function to solve your problem.
Last updated: 2024-01-18

Post by dim54 on MBChannel ^{CODESYS Forge talk (Post)}
Hello! I am interested in the Modbus Slave channel parameter uiReadLength to use in the ST-program (see picture). How to read the value of uiReadLength in a ST-program? Only Edwin the Great and Terrible can answer this question.
Last updated: 2024-01-22

Post by saugat10 on Problem installing Multicore codesys control in raspberry pi 4 ^{CODESYS Forge talk (Post)}
I have Raspbian bullseye (32 bit) installed in my raspberry pi 4. I want to install codesys control multicore in my pi but the option is greyed out when i try to install it. Am i missing something?
Last updated: 2024-02-07

Post by fless on How to change bHiresMode ^{CODESYS Forge talk (Post)}
Hi, you should see 2 input fields in the scaling tab of your linear axis: increments and units in application just set increments to 10 and units in application to 366
Last updated: 2024-03-12

Post by fless on See only variable ^{CODESYS Forge talk (Post)}
either you have "Insert with namespace" enabled in the SmartCoding options or your GVL_GLOBAL starts with {attribute 'qualified_only'} btw it's considered good practice to put the namespace in front of the variable. you could have variable with the same name in your PRG or FB.
Last updated: 2024-03-14

Post by damian177 on RevPi piBridgeRight not found in project. ^{CODESYS Forge talk (Post)}
Hi, Like in tpoic I hahe a problem with running DIO on RevPi Core SE working with Codesys. Look in attachments. Any idea how solve the problem ?
Last updated: 2024-04-27

Post by eschwellinger on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
your device in the device tree is Pi 64 online you have Pi MC (32bit) - update device in the device tree to Pi MC then it will work.
Last updated: 2024-06-23

Post by shaunvdm on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
Hi All, We downgraded Codesys LAD/FB in the IDE to version 4.5 and it works. Codesys Version 4.6 lad/fb not working. Was the way we fixed this. Kind Regards Shaun
Last updated: 2025-11-17

Post by osande on Trend/trace data ^{CODESYS Forge talk (Post)}
Anyone have problems with trend in lastest release - SP21 Patch5? Does not record data, stores only zeros to the sqlite database and flatliners at zero in trend/trace views. Worked in P4.
Last updated: 2026-03-12

Post by yueqiqi on How to get the instance of a CANopen Master in the Device Tree? ^{CODESYS Forge talk (Post)}
I have been wondering of how to get the instance of a Canopen Master in the device tree, please see the picture in the attachment . Could anyone help me?
Last updated: 2026-09-02

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Am I alone in this? Is this a known fault? Should I look for the reason of the lacking update option for "Control for linux SL" in my system or is it a potential fault in the codesys system?
Last updated: 2026-02-17

Sort by relevance or date