SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications ^{CODESYS Forge talk (Thread)}
SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications
Last updated: 2024-06-14

SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications ^{CODESYS Forge talk (Thread)}
SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications
Last updated: 2024-06-14

SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications ^{CODESYS Forge talk (Thread)}
SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications
Last updated: 2024-06-14

SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications ^{CODESYS Forge talk (Thread)}
SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications
Last updated: 2024-06-17

Post by davidbo on Toradex and CODESYS and licensing ^{CODESYS Forge talk (Post)}
Does it mean that the USB dongle has to be inserted all time in order, for the device running in licensed mode?
Last updated: 2025-10-20

CoDeSys v3.5: creating libraries for both 32-bit and 64-bit controllers ^{CODESYS Forge talk (Thread)}
CoDeSys v3.5: creating libraries for both 32-bit and 64-bit controllers
Last updated: 2025-12-10

Post by smeitink on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Hi all, I'm looking for help with an issue I've come across while trying to facilitate Modbus communication between a WAGO PFC200 PLC using a 750-652 communication module and an iEM2050 Series Single Phase Energy Meter. I believe to have everything wired and setup correcty, but I keep running into a "Error time out" message, and by now I don't really know what else to try. My setup is as follows: A PFC200 Wago PLC, which has 2 750-652 Serial Interfaces extension modules connected to its field bus. I'm using one of these to talk to a Schneider iEM2050 - kWh-meter over modbus. I have connected terminal 23 (A) of the iEM2050 to connector 6 (A) on the 750-652. I have connected terminal 24 (B) of the iEM2050 to connector 2 (B) of the 750-652. I'm using 200mm of twisted together wires to connected them both, and I have placed a 120 ohm resistor between A and B at both ends. I've attached relevant pinout images to this post. I then wrote a simple program that configures the Mobus port, as per the datasheet of the iEM2050. You can find an image of the relavent page attached to this post too. This is my program: PROGRAM PLC_PRG VAR Master: FbMbMasterSerial; xIsConnected: BOOL; xError: BOOL; iIndex: INT := 1; xTrigger: BOOL; utQuery : typMbQuery := ( bUnitId := 1, // The Modbus unit or slave address bFunctionCode := 4, // Function code for reading input registers uiReadAddress := 1829, // adress for the Power on off counter uiReadQuantity := 1 // Quantity of registers to read ); iStep: INT; oStatusModbus: WagoSysErrorBase.FbResult; utResponseModbus: typMbResponse; xConnect: BOOL := FALSE; delayTimer: TON; END_VAR Master( xConnect:= xConnect, I_Port:= _750_652_24_1, udiBaudrate:= 9600, usiDataBits:= 8, eParity:= WagoTypesCom.eTTYParity.Even, eStopBits:= WagoTypesCom.eTTYStopBits.One, eHandshake:= WagoTypesCom.eTTYHandshake.None, ePhysical:= WagoTypesCom.eTTYPhysicalLayer.RS485_HalfDuplex, xIsConnected=> xIsConnected, xError=> xError, oStatus=> oStatusModbus, eFrameType:= WagoAppPlcModbus.eMbFrameType.RTU, tTimeOut:= T#5S, utQuery:= utQuery, xTrigger:= xTrigger, utResponse:= utResponseModbus); delayTimer(IN := TRUE, PT := T#3S); // Use the Q output of the timer to set xConnect after the delay IF delayTimer.Q THEN xConnect := TRUE; END_IF CASE iStep OF 0: //Wacht totdat de master de poort geopend heeft IF xIsConnected THEN iStep := 1; END_IF 1: //Stuur request naar de slave xTrigger := TRUE; iStep := 2; 2: //Wacht totdat de master klaar is met het afhandelen van de request IF NOT xTrigger THEN iStep := 3; END_IF END_CASE The TON delay before opening the port is due to a an error I encountered when opening it straight away. This seems to be a bug, as described here. However, the TON solved that particular issue. I tried reading multiple registers, but like I said, I still always end up with the "Error time out". What else can I test or try at this point?
Last updated: 2024-02-24

Post by sushela on Temu Coupon code [acq615756 OR acq615756] $100 Coupon bundle for multiple uses ^{CODESYS Forge talk (Post)}
The Temu Coupon Code [acu577459 OR acq615756] is a valuable offer for all customers in the United States, providing a $100 Coupon on your next purchase. This code is designed for both new and existing customers, making it an excellent opportunity to save significantly on a wide range of products available on the Temu platform. To redeem this offer, simply enter the code at checkout after adding items to your cart. Additionally, be sure to check for any specific terms or conditions, such as minimum purchase requirements, to ensure you can fully benefit from this generous Coupon. Enjoy shopping and saving! Temu Coupon code $100 off is an exciting opportunity for savvy shoppers looking to save big on their favorite products. This exclusive Coupon can help you maximize your savings while enjoying the vast selection of items available on Temu's platform. The [acu577459 OR acq615756] Coupon code offers maximum benefits for people in the USA, Canada, and European nations. This special Couponion allows customers in these regions to take advantage of significant Coupons on their purchases. Temu Coupon $100 off and Temu 100 off Coupon code are game-changers for both new and existing customers. These offers provide an excellent opportunity to explore Temu's extensive product range while keeping more money in your pocket. What Is The Coupon Code For Temu $100 Off? Both new and existing customers can enjoy amazing benefits when they use our $100 Coupon code on the Temu app and website. The Temu Coupon $100 off and $100 off Temu Coupon offer is an excellent way to save money on your next purchase. Here are some of the benefits you can expect when using the [acu577459 OR acq615756] code: [acu577459 OR acq615756]: Flat $100 off on your purchase [acu577459 OR acq615756]: $100 Coupon pack for multiple uses [acu577459 OR acq615756]: $100 flat Coupon for new customers [acu577459 OR acq615756]: Extra $100 Coupon code for existing customers [acu577459 OR acq615756]: $100 Coupon for USA/Canada users Temu Coupon Code $100 Off For New Users In 2024 New users can reap the highest benefits by using our Coupon code on the Temu app. The Temu Coupon $100 off and Temu Coupon code $100 off offer exceptional value for first-time shoppers. Here's what you can expect: [acu577459 OR acq615756]: Flat $100 Coupon for new users [acu577459 OR acq615756]: $100 Coupon bundle for new customers [acu577459 OR acq615756]: Up to $100 Coupon bundle for multiple uses [acu577459 OR acq615756]: Free shipping to 68 countries [acu577459 OR acq615756]: Extra 30% off on any purchase for first-time users How To Redeem The Temu Coupon $100 Off For New Customers? Redeeming your Temu $100 Coupon is a straightforward process. Follow these steps to use the Temu $100 off Coupon code for new users: Download the Temu app or visit their website Create a new account Browse and add items to your cart Proceed to checkout Enter the Coupon code [acu577459 OR acq615756] in the designated field Apply the code and watch your total decrease Complete your purchase and enjoy your savings Temu Coupon $100 Off For Existing Customers Existing users can also benefit from our Coupon code on the Temu app. The Temu $100 Coupon codes for existing users and Temu Coupon $100 off for existing customers free shipping offer great value. Here's what you can expect: [acu577459 OR acq615756]: $100 extra Coupon for existing Temu users [acu577459 OR acq615756]: $100 Coupon bundle for multiple purchases [acu577459 OR acq615756]: Free gift with express shipping all over the USA/Canada [acu577459 OR acq615756]: Extra 30% off on top of the existing Coupon [acu577459 OR acq615756]: Free shipping to 68 countries How To Use The Temu Coupon Code $100 Off For Existing Customers? Using the Temu Coupon code $100 off as an existing customer is simple. Follow these steps to apply your Temu Coupon $100 off code: Open the Temu app or visit their website Log in to your existing account Add desired items to your cart Go to the checkout page Look for the Coupon code field Enter [acu577459 OR acq615756] and apply Verify that the Coupon has been applied Complete your purchase with your savings Latest Temu Coupon $100 Off First Order Customers can get the highest benefits by using our Coupon code during their first order. The Temu Coupon code $100 off first order, Temu Coupon code first order, and Temu Coupon code $100 off first time user offer exceptional value. Here's what you can expect: [acu577459 OR acq615756]: Flat $100 Coupon for first order [acu577459 OR acq615756]: $100 Temu Coupon code first order [acu577459 OR acq615756]: Up to $100 Coupon for multiple use [acu577459 OR acq615756]: Free shipping to 68 countries [acu577459 OR acq615756]: Extra 30% off on any purchase for first order How To Find The Temu Coupon Code $100 Off? Finding a Temu Coupon $100 off or Temu Coupon $100 off Reddit is easier than you might think. One of the best ways to get verified and tested Coupons is by signing up for the Temu newsletter. This way, you'll receive the latest offers directly in your inbox. We also recommend visiting Temu's social media pages to stay updated on their latest Coupons and Coupontions. These platforms often feature exclusive deals and time-sensitive offers that you won't want to miss. For the most up-to-date and working Temu Coupon codes, we suggest visiting trusted Coupon sites. These platforms regularly update their offerings and verify the codes to ensure they're still valid. Is Temu $100 Off Coupon Legit? Yes, the Temu $100 Off Coupon Legit and Temu 100 off Coupon legit offers are absolutely genuine. Our Temu Coupon code "[acu577459 OR acq615756]" is 100% legitimate and safe to use. Any customer can confidently apply this code to receive $100 off on their first order and subsequent purchases. We want to assure our readers that this code is not only legitimate but also regularly tested and verified. Our team works diligently to ensure that all the Coupon codes we provide are current and functional. It's worth noting that our Temu Coupon code is valid worldwide, making it accessible to customers in 68 countries. Additionally, this code doesn't have an expiration date, allowing you to use it at your convenience without feeling rushed. How Does Temu $100 Off Coupon Work? The Temu Coupon code $100 off first-time user and Temu Coupon codes 100 off work by providing an instant Coupon at checkout. When you apply the Coupon code [acu577459 OR acq615756] during the purchase process, the system automatically deducts $100 from your total order value. This Coupon is designed to encourage new customers to try Temu's vast array of products while offering significant savings. It's also available for existing customers, Couponting customer loyalty and repeat purchases. The Coupon is applied to the subtotal of your order before taxes and shipping fees, ensuring you get the full $100 off your merchandise. How To Earn Temu $100 Coupons As A New Customer? Earning a Temu Coupon code $100 off or 100 off Temu Coupon code as a new customer is straightforward. The most direct way is to use our provided code [acu577459 OR acq615756] during your first purchase. However, Temu also offers various opportunities to earn additional Coupons. You can sign up for Temu's newsletter to receive exclusive offers and Coupontions. Participating in Temu's referral program, where you invite friends to join the platform, can also earn you Coupons. Additionally, keep an eye on Temu's social media pages and special holiday sales events, which often feature substantial Coupons and Coupon offers for new customers. What Are The Advantages Of Using Temu Coupon $100 Off? Using a Temu Coupon code 100 off or Temu Coupon code $100 off comes with numerous advantages: $100 Coupon on your first order $100 Coupon bundle for multiple uses 70% Coupon on popular items Extra 30% off for existing Temu customers Up to 90% off on selected items Free gift for new users Free delivery to 68 countries These advantages make shopping on Temu not only more affordable but also more rewarding. The substantial Coupons allow you to explore a wider range of products and potentially make larger purchases without straining your budget. Temu $100 Coupon Code And Free Gift For New And Existing Customers There are multiple benefits to using our Temu Coupon code. The Temu $100 off Coupon code and $100 off Temu Coupon code offer exceptional value for both new and existing customers: [acu577459 OR acq615756]: $100 Coupon for the first order [acu577459 OR acq615756]: Extra 30% off on any item [acu577459 OR acq615756]: Free gift for new Temu users [acu577459 OR acq615756]: Up to 70% Coupon on any item on the Temu app [acu577459 OR acq615756]: Free gift with free shipping in 68 countries including the USA and UK These benefits make shopping on Temu an incredibly rewarding experience, allowing you to maximize your savings while enjoying a wide range of high-quality products. Pros And Cons Of Using The Temu Coupon Code $100 Off This Month Before using the Temu Coupon $100 off code or Temu 100 off Coupon, consider these pros and cons: Pros: Significant savings on your purchase Applicable to a wide range of products No minimum purchase requirement Valid for both new and existing customers Can be combined with other ongoing Coupontions Cons: Limited to one use per account May not apply to certain Coupontional or clearance items Terms And Conditions Of Using The Temu Coupon $100 Off In 2024 When using the Temu Coupon code $100 off free shipping or latest Temu Coupon code $100 off, keep these terms and conditions in mind: Our Coupon code doesn't have an expiration date Readers can use it anytime they want The Coupon code is valid for both new and existing users It can be used in 68 countries worldwide There are no minimum purchase requirements for using our Temu Coupon code "[acu577459 OR acq615756]" The Coupon is applied to the subtotal before taxes and shipping Cannot be combined with certain other Coupontional offers Temu reserves the right to modify or cancel the Coupontion at any time Final Note: Use The Latest Temu Coupon Code $100 Off Don't miss out on the incredible savings offered by the Temu Coupon code $100 off. This Coupontion provides an excellent opportunity to explore Temu's vast product range while keeping more money in your pocket. Remember to use the Temu Coupon $100 off during your next purchase to maximize your savings. Happy shopping and enjoy your Couponed Temu haul! FAQs Of Temu $100 Off Coupon Q: How often can I use the Temu $100 off Coupon? A: The Temu $100 off Coupon ([acu577459 OR acq615756]) can typically be used once per account. However, Temu occasionally offers multiple-use Coupons, so it's best to check the specific terms of each Coupon. Q: Can I combine the $100 off Coupon with other Temu Coupontions? A: In most cases, yes. The Temu $100 off Coupon can often be combined with other ongoing Coupontions on the platform, allowing you to maximize your savings. Always check the terms and conditions of each offer. Q: Is there a minimum purchase amount required to use the $100 off Coupon? A: No, there is no minimum purchase requirement for using our Temu Coupon code [acu577459 OR acq615756]. You can apply it to any eligible purchase, regardless of the total amount. Q: How long is the Temu $100 off Coupon valid? A: Our Temu Coupon code [acu577459 OR acq615756] doesn't have an expiration date. You can use it at your convenience. However, Temu reserves the right to modify or cancel Coupontions, so it's best to use it sooner rather than later. Q: Can both new and existing Temu customers use the $100 off Coupon? A: Yes, our Temu Coupon code [acu577459 OR acq615756] is valid for both new and existing customers. It's a great way for new users to try Temu and for existing customers to enjoy additional savings on their purchases.
Last updated: 2024-10-26

Post by lucaver89 on Raspberry pi 3 and runtime 4.9.0.0 ^{CODESYS Forge talk (Post)}
Good morning, I'm using a raspberry pi3 as plc with the runtime 4.9.0.0. My program has many of retrain variables but when an update is performed the retrain variables comes back to default values. Is the a way to backups the retrain variables n a csv file? Is still the way to restore them from the csv? Thank you for helping Luca
Last updated: 2023-09-23

Post by ltrinta on AWS IoT Core connection using AWS certificates ^{CODESYS Forge talk (Post)}
Hi there I want to know if there is possibility to connect a CODESYS application to AWS IoT Core using the certificates owneds by AWS. In the examples of CODESYS using AWS IoT Core library, we need to generate a local certificate and update it to AWS IoT Core. I want to use AWS IoT Core certificates. Regards, Leonardo
Last updated: 2023-09-28

Post by simotion on Variable indicating axis pending gearing or camming ^{CODESYS Forge talk (Post)}
Is there a variable indicating that a gearing or camming operation is pending? For instance MC_Gearin has beeen triggered, but starting point of master axis to start the sychronisation movement is not reached yet, so the slave axis is just waiting for this. I should be able to differ between a pending and active gearing or camming
Last updated: 2023-11-28

Post by theo on Error codesys raspberry ^{CODESYS Forge talk (Post)}
Bonjour a tous je souhaiterai connecter mon Raspberry a codesys en tant qu'automate cependant lorsque je enterent l'IP dans le encadré et que je fais entrer voici le message qui apparait, je suis français mais en anglais ça signifie : " vous n'êtes actuellement pas autorisé a exécuter cette action sur l'appareil. Please enter the username and password of a user account with the required access rights.
Last updated: 2023-12-08

Post by dkugler on Converting hex bytes to float ^{CODESYS Forge talk (Post)}
have a look at UNIONs. With a union you are able to write single bytes to the same adress area which belongs to a float variable at the same time. I like to do a lot of convertions belonging to interfaces and fieldbus in this way, f.eg. word / byte swapping etc.
Last updated: 2024-08-06

Post by oymyakon on Modbus Lockup ^{CODESYS Forge talk (Post)}
Hi i have a project where i am communicating with many modbus devices using TCP to serial. This is all working extremely well except when i turn one of the remote devices off. If i leave the auto reconnect on it still doesn't talk to the rmianing devices and if i turn Auto reconnect off it locks up. Any help would be appreciated. Paul.
Last updated: 2024-08-07

Post by oymyakon on Modbus Lockup ^{CODESYS Forge talk (Post)}
Hi i have a project where i am communicating with many modbus devices using TCP to serial. This is all working extremely well except when i turn one of the remote devices off. If i leave the auto reconnect on it still doesn't talk to the rmianing devices and if i turn Auto reconnect off it locks up. Any help would be appreciated. Paul.
Last updated: 2024-08-07

Post by maldus512 on How to adapt Codesys Control SL to custom board ^{CODESYS Forge talk (Post)}
Hello everyone, I have been given the task to develop I/O drivers for a custom made, Linux based board to allow for Codesys applications to run and control the hardware. I have successfully installed Codesys Control SL for ARM/Linux and tested it with a simple demo application. Now I should start interfacing the runtime to the actual hardware; I should be able to interact with 2 RS485 serial ports, a few GPIOs and an I2C port, all of which already have the corresponding /dev/ interface in the Linux system. I am having trouble understanding how it should be approached. I have found sporadic references that fail to lead to a really comprehensive documentation. For example: The store page (https://store.codesys.com/en/codesys-control-for-linux-arm-sl-1.html#options) mentions a "runtime package" that should allow "Integration of existing C code" and "Usage of local I/Os", which seems exactly what I need to interact with custom peripherals. I have found no further reference to Codesys-C interpop. The Codesys Help page for the runtime package has a page on the "Development of Drivers" (https://content.helpme-codesys.com/en/CODESYS%20Control/rtsllinuxrbpdriverdevelopment.html) that suggests to either "Implement a function block" or "Implement I/O drivers". Those in turn lead to this page (https://forge.codesys.com/drv/io-drivers/doc/Generic/) which describes briefly an XML schema to describe new devices; unfortunately, it doesn't mention what to do with such a description (i.e. how does the runtime know about it) or how it is in any way connected to the actual hardware. Could anyone give me some pointers? I should also mention I have no prior experience with Codesys, so maybe I'm missing an obvious answer.
Last updated: 2024-08-09

Post by micik on SysFileOpen not working ^{CODESYS Forge talk (Post)}
Hi, I have the same problem. Some of the libraries I created over time depend on writing files to a folders like c:\Temp. I can confirm that proposed solution is not working with 3.5.20 Patch 2. Can you please specify wich exactly .cfg file needs to be modified and in what way, in order to include c:\Temp in the SysFile path? Thank you!
Last updated: 2024-08-17

Post by hua-huang on Compile problem - can't get .bin or .h86 file ^{CODESYS Forge talk (Post)}
Hello, I am programming for IFM controller CR7132, after I check 'create binary file of the application' and 'rebuild all', there is no error when compiling but no .bin or .h86 file generated. Could someone please inform the correct way? Thanks in advance! BR, Hua
Last updated: 2024-09-12

Post by jeffg on ERROR: GetNetLinkSockAndInfoByMac(): could not open netlink socket: Too many open files ^{CODESYS Forge talk (Post)}
I just installed codesys runtime on a raspberry pi Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz (Compute Module 4) I am running on Codesys control for raspberry pi 64 SL ver 4.13.0 and I keep getting a crash after about five to ten minutes. This program was running fine on a 32bit system with runtime 4.8 previously but they upgraded the panel PC cause it got smashed. Looking at the logs I see this error "ERROR: GetNetLinkSockAndInfoByMac(): could not open netlink socket: Too many open files" at the time of crash. I do have a UDP socket open for a serial to ethernet adapter and im wondering if maybe its opening a bunch of sockets and while receiving messages, Im not sending anything to the device only receiving. Below is the code used for the UDP VAR // Scale Comm fbPeerServer : NBS.UDP_Peer; ipAddress : NBS.IPv4Address; fbReceive : NBS.UDP_Receive; xPeerActiv : BOOL := TRUE; abyReceive : ARRAY [0..255] OF BYTE; sLastValidReceive : STRING(255); udiIndex : UDINT; END_VAR IF xPeerActiv AND NOT fbPeerServer.xBusy THEN ipAddress.SetInitialValue(ipAddress := gvlSettings.sIPAddres); fbPeerServer(xEnable := TRUE, itfIPAddress := ipAddress, uiPort := gvlSettings.uiPort); END_IF fbPeerServer(); fbReceive(xEnable := fbPeerServer.xBusy, itfPeer := fbPeerServer, pData := ADR(abyReceive), udiSize := SIZEOF(abyReceive)); IF fbReceive.udiCount > 0 THEN IF fbReceive.udiCount < SIZEOF(sLastValidReceive) THEN SysMem.SysMemCpy(pDest := ADR(sLastValidReceive), pSrc := ADR(abyReceive), udiCount := fbReceive.udiCount); // Set End of String sLastValidReceive[fbReceive.udiCount] := 0; END_IF END_IF If anyone as seen this I could really use some help figuring it out. I included the Log report
Last updated: 2024-09-19

Post by rajankkrs on Ethercat master softmotion lost connection ^{CODESYS Forge talk (Post)}
Dear Edwin, we are also facing similar problem of communication failure, FB3 error in servo drives. we tried all the suggestion by Kim but still we couldn't solve the issue. we uses Codesys 3.5 sp18 patch2, servotronix servo drives CDHD and crevis GN-9483. Any suggestion / input to solve the issue please. is anyway in codesys to reset the FB3 error? -Rajan
Last updated: 2024-10-07

Post by davidb on Initialisation TimerSwitch of Util Codesys 3.5 Library ^{CODESYS Forge talk (Post)}
jf89 Hello!Good morning You got it to use the function block Timer Switch for your application? I'm needing to do one system that turn on at 8:00am o' clock and turn off at 17:00pm o' clock, from Monday to Friday. Please, can you help me?
Last updated: 2024-10-14

Post by csu-chris on No file found ^{CODESYS Forge talk (Post)}
I'm having trouble getting started with the SysFile library. I tried copying and running the code found here: https://forge.codesys.com/forge/talk/Engineering/thread/f17c3d0e64/ Every time I try to run the file handle pointer returns: 16#FFFFFFFFFFFFFFFF <dereference of="" invalid="" pointer=""></dereference> I can see the file when I look in the Device -> Files window Any idea what I'm doing wrong?
Last updated: 2024-10-15

Post by davidbo on Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Post)}
When I use the FUNCTION_BLOCK ModbusChannel I have to sepcify the integer iChannelIndex It can easily go wrong if one has many channels. It would be better if one could use the name. Is that possible? Attached a snippet of the channel name and the channel index to the left.
Last updated: 2024-10-21

Post by pascaljt on Warning code C0373 ^{CODESYS Forge talk (Post)}
Hello, I wrote a function block for a controller but I have a warning code C0373 "expression or part of it has no effect" and the sub routine which contain my function block is underlined in blue. Despite, the FB works perfectly. Do you know why I have this warning ? Thanks. Pascal.
Last updated: 2024-10-30

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
yes i took the library from another forum: https://forge.codesys.com/forge/talk/Runtime/thread/f1400b71b6/, it is made for the ads1115 but the ads1015 is almost the same device with same adresses i only changed the divide value of the analog value, because thats the only difference between the ads1115 and ads1015.
Last updated: 2024-11-07

Sort by relevance or date