Post by dantheman on Connecting to SoftPLC Only Works By Turning Off Modbus Ethernet Port ^{CODESYS Forge talk (Post)}
I have an IPC with 2 ethernet ports and 1 Wi-Fi. I'm using ModbusTCP with the ethernet port named "enp2s0" connected to my remote I/O. This works fine when testing with Python and also works with CODESYS, but CODESYS is only able to scan for the Linux SoftPLC when I turn off the "enp2s0" interface. In other words, I can't get online with the IDE if I want my ModbusTCP comms to run with CODESYS. I'm using a Linux SoftPLC that has the following entry in CODESYSControl.cfg, hoping that this will allow me to connect with "enp1s0" or "wlp3s0", and leave "enp2s0" for field comms, but this seems to only make the source IP of the ModbusTCP comms to be bound to "enp2s0". That last point is the case only if I don't restart the service, but if I do restart the service after changing the config file, the source IP for the ModbusTCP comms then becomes the one for "enp1s0", which is very confusing to me: [SysSocket] Adapter.0.Name="enp2s0" Adapter.0.EnableSetIpAndMask=1 On the device list, I only have "enp2s0" given as the ethernet device that has the ModbusTCP master & slave beneath it, shown in Screenshot 1. On the IPC, I can ping the ModbusTCP client (remote I/O) from "enp2s0", and I've attached a Wireshark capture of running ModbusTCP from the CODESYS runtime as Screenshot 2, 3 & 4 (again, I can't get online when this is running, I have to turn off "enp2s0" to connect even when it's idle and I don't have an active TCP session with my Python tests). Like I explained above, the source IP is "enp1s0", even though the ethernet device on the project is "enp2s0". I was lucky to catch the red message that showed the source IP that makes sense to me (the one for "enp2s0"), but for some reason that connection was reset and I never saw that packet again. I've also tried this with Auto-reconnect both enabled & disabled, for the ModbusTCP Master device. I also have to turn off "enp1s0" and then turn it on, just so that I can have the ModbusTCP comms running from "enp2s0" (which is not intuitive in any way to me, I'd love some help understanding that phenomenon as well) in the weird manner that I've described above. I would be very appreciative if someone can help me figure out this pickle. I'd love to just connect to CODESYS through my Wi-Fi interface and leave my ethernet ports for field comms.
Last updated: 2024-08-01

Post by gepert on parker servo and position ^{CODESYS Forge talk (Post)}
Hello, Thank you for your response. In my application i use ethercat and while work i do not turn off power. After relative move motor is in standstill. As you suggest I suppose that problem is in drive setting but i do not see any option about increase standstill torque. Below i posted some photos from drive setting manager - PSD Servomanager Do you see any settings responsible for standstill torque? thank you
Last updated: 2024-08-05

Post by micik on How to generate an "ENI" file ^{CODESYS Forge talk (Post)}
That really depends on this third party software you want to use. It is possible that .xml file generated with "Generate EtherCAT XML" will not be recognized as valid ENI file. Anyway, "Generate EtherCAT XML" command is not available through standard menus and needs to be added via Tools->Customize and then Add Command. You'll find it under "Devices" section. If you provide more info, we might be able to help you further.
Last updated: 2024-08-09

Post by mubeta on STRUCT AT %MW1000 ^{CODESYS Forge talk (Post)}
This is normal and correct since in CoDeSys static addressing of variables uses the IEC method. A LONG tag has the size of 8 bytes, so %ML0 coincides with %MB0 ... %MB7; %ML1000 with %MB8000 ... %MB8007. (Similar reason for word and other formats). Also the reason the compiler won't let you map the structure to a %MW depends on the fact that the individual base elements are manipulated to 64 bits regardless of the smaller size. That said, it makes me strange that you cannot write a parser without making use of static memory allocation.
Last updated: 2024-08-13

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
Hi micik, I am not sure I am using well the code, because I checked the directory and there is no retains.ret file. Now I deleted the code from my project and the values are still works as persistant variables after ssh reboot it seems to me they retain as their previous value. So I am a bit confused, maybe 4.12.0.0 Raspberry Pi SL solved the persitent variable problem...
Last updated: 2024-08-20

Post by anuj9326 on OPC-UA Client connection, Linux SL /Raspberry Pi ^{CODESYS Forge talk (Post)}
hello edwin i have did the same and i could connect the opc-ua server but i dont see anything in the resources tree, in the application i linked my variables to the symbol configuration but i dont see that in the uaexpert. if i use the same application with a non linux system i can get those variables values and see the complete tree structure. What could be the problem ?
Last updated: 2024-08-21

Post by anuj9326 on OPC-UA Client connection, Linux SL /Raspberry Pi ^{CODESYS Forge talk (Post)}
hello edwin i have did the same and i could connect the opc-ua server but i dont see anything in the resources tree, in the application i linked my variables to the symbol configuration but i dont see that in the uaexpert. if i use the same application with a non linux system i can get those variables values and see the complete tree structure. What could be the problem ?
Last updated: 2024-08-21

Post by nicopolux on Profinet RPC-call error ^{CODESYS Forge talk (Post)}
Hello everyone Since I have installed Codesys 3.5.20sp2 I cannot get the profinet features working again. Now I get RPC Blocked during device scan (see attached file) and when online I get RPC-call error (see attached file). I run Codesys on the last version of Windows 11, Profinet ports have been added to Firewall rules, and even with disabled Firewall I get same result I really never seen that before Same result using another PC I already spent 2 days to find the issu without any success, I would appreciate some help, thank you! Nico
Last updated: 2024-08-22

Post by taqamert on IFM-Sensor ADC READ ^{CODESYS Forge talk (Post)}
I have a pressure sensor that measures 0-600 bar and outputs a 0-5V signal, but my PLC reads analog inputs in the 0-10V range and displays a value of 1024 when 10V is applied. In this case, when the sensor outputs 5V at 600 bar, the PLC shows a value of 512. My working range is 0-350 bar, which means the PLC only uses 298 bits in this range, significantly reducing the resolution. What can I do to achieve better resolution within the 0-350 bar range?
Last updated: 2024-08-23

Post by taqamert on IFM-Sensor ADC READ ^{CODESYS Forge talk (Post)}
I have a pressure sensor that measures 0-600 bar and outputs a 0-5V signal, but my PLC reads analog inputs in the 0-10V range and displays a value of 1024 when 10V is applied. In this case, when the sensor outputs 5V at 600 bar, the PLC shows a value of 512. My working range is 0-350 bar, which means the PLC only uses 298 bits in this range, significantly reducing the resolution. What can I do to achieve better resolution within the 0-350 bar range?
Last updated: 2024-08-23

Post by taqamert on IFM-Sensor ADC READ ^{CODESYS Forge talk (Post)}
I have a pressure sensor that measures 0-600 bar and outputs a 0-5V signal, but my PLC reads analog inputs in the 0-10V range and displays a value of 1024 when 10V is applied. In this case, when the sensor outputs 5V at 600 bar, the PLC shows a value of 512. My working range is 0-350 bar, which means the PLC only uses 298 bits in this range, significantly reducing the resolution. What can I do to achieve better resolution within the 0-350 bar range?
Last updated: 2024-08-23

Post by ralfki on User management ^{CODESYS Forge talk (Post)}
Hello eschwellinger, at first thank you for your answer. So the only ways to activate the user management are CodeSys delevelopment enviroment and the Codesys Automation Server. So there is no function to activate the user management via code? Do you have an idea how to get back the users when somebody replaced the PLC. Our customers have only our own developed visualization and they also don't want to install further softwares. Do you maybe have a solution for this
Last updated: 2024-09-04

Post by timvh on Stack overflow with really simple function ^{CODESYS Forge talk (Post)}
You have declared the function block in a function and call the instance also from a function. This is not correct, because a function is initialised with every call. The http client function block should be declared as Global Variable if you want to cal it from a Function, but probably it is better to declare it in a Program and also call the instance of the http function block from the same Program.... The variables of a Program are not initialised with each call.
Last updated: 2024-09-20

Post by timvh on Communication between applications on same device/controller/runtime (Win RTE 3.5.20.20) ^{CODESYS Forge talk (Post)}
The RTE will take the RTE license. The HMI will take the HMI license. For the Application Based Licenses, the Runtime will take the smallest which is required. So if you have an application running EtherCAT and no visualization, only the Control with support for EtherCAT is used. If you have another runtime which requires the visualization, it will take the smallest Control license which is required and available + the smallest visualization license which is required.
Last updated: 2024-10-01

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Hello, I have a problem when opening the license manager for my raspberry pi (CM4 model) with runtime 4.13.0.0. I select "Device" --> "Soft Container" and click on my device in the scan window but I get this error message : Licensing info not available. There is no dongle attached to this device. I can't install licenses anymore, and I don't understand why is CodeSys looking for a dongle when I specified I wanted to use a Soft Container. Can somebody help me please ? Best regards
Last updated: 2024-10-04

Post by bzzz on Connect WS2812B Light Strip to CodeSys via RasPi ^{CODESYS Forge talk (Post)}
Hey guys, I have a RasPi and can control my WS2812B (addressable light strip) via Python. The lightstrip is this one: https://core-electronics.com.au/1m-rgb-led-strip-ws2812b-144-per-meter-white-strip-weatherproof.html What I would like to do is to control it directly via CodeSys through the plc on my RasPi. I know I can run a python script on CodeSys, but I'd like to avoid doing that. Is it possible, and how do I do it? Is there a library that does this?
Last updated: 2024-10-16

Post by xabier on Problem Update new version Master ethercat ^{CODESYS Forge talk (Post)}
Hi, I have a project in Codesys...and i need update a new version of amster ehtercat and i have a problem. The origianl version with create of project was 3.5.13.10 I can change version to Master Ethercat 3.5.13.10 to 3.5.16.70 but i can´t update the last version 4.4.0.0 (I attached the screen "Version Master OK-NO OK"). In the moment update to the last version appear a lot of error("Version Master NO OK") Can anyone help me please?
Last updated: 2024-10-25

Post by pernockham on Is there a pragma for init/instantiation of local variables in FB (like in Methods) ^{CODESYS Forge talk (Post)}
Im using a pointer as input for a FB and for convenience I like to use 'referenced' variable internally. I use this setup in methods which works because internal variables are instantiated for each call. In a FB these variables are instantiated and initiated for the first call only. Is there a pragma/attribute available that changes this behaviour to mirror a 'method'-call?
Last updated: 2024-10-31

Post by jvfred on CodesysHMI.exe: Start Error ^{CODESYS Forge talk (Post)}
I have used Codesys HMI SL on several projects. Today I turned my PC on to start building another project and received the following error message when I tried to start my device: "CodesysHMI.exe: Start Error One of the following licenses is required: CodeMeter 101597:13 Failure reason: CmContainer Entry not found, Error 200 CodeMeterAct 5000304:13 Failure reasons: CmContainer Entry not found, Error 200" I have tried reloading HMI SL and even updated to the current version with no success. I am using HMI SL version V3.5.20.10. Any help would be greatly appreciated.
Last updated: 2024-11-01

Post by jvfred on CodesysHMI.exe: Start Error ^{CODESYS Forge talk (Post)}
I have used Codesys HMI SL on several projects. Today I turned my PC on to start building another project and received the following error message when I tried to start my device: "CodesysHMI.exe: Start Error One of the following licenses is required: CodeMeter 101597:13 Failure reason: CmContainer Entry not found, Error 200 CodeMeterAct 5000304:13 Failure reasons: CmContainer Entry not found, Error 200" I have tried reloading HMI SL and even updated to the current version with no success. I am using HMI SL version V3.5.20.10. Any help would be greatly appreciated.
Last updated: 2024-11-01

Post by trusty-squire on Display Units/Scale on Path3D visualization ^{CODESYS Forge talk (Post)}
Hi, Is it possible to display the units along the X,Y axis of the Path3D element? It correctly shows the CNC path to be followed, but there's no indication of scale or size of what's being displayed. I looked at the documentation and my first inclination is that this is not possible, and the option option would be to somehow recreate the Path3D functionality into the XY Chart visu element - which is not ideal. Any suggestions or pointers would be appreciated!
Last updated: 2024-11-08

Post by smartcoco on Request a dark mode for CODESYS ^{CODESYS Forge talk (Post)}
CODESYS IDE is not a modern IDE. Its interface is ugly, its operation is not user-friendly, its functions are lacking, its feedback is slow, and its development is not good enough. In fact, CODESYS is a helpless choice under the current situation. But this situation will not last long. For example, SIMATIC AX is a strong competitor of CODESYS, which is more open and inclusive.
Last updated: 2024-12-03

Post by dsa28 on EL6910 as a PROFIsafe F-Host in Codesys ^{CODESYS Forge talk (Post)}
Hello All, Does anyone have experience configuring a PROFIsafe communication between EL6910 (F-Host) and and a F-Device in Codesys? I would expect that the PROFIsafe configuration process would be pretty similar as the FSoE configuration. Although, when an F-Device is included under PN-Controller, Codesys doesn't allocate a PROFIsafe logical device automatically under EL6910, as it happens when a FSoE slave is added under EtherCAT master. I thank anyone in advance who can help me on this.
Last updated: 2024-12-05

Post by pmanuele on Beckhoff AS1060 and EL7041 configuration ^{CODESYS Forge talk (Post)}
Hello everyone, i'm having some problems commanding AS1060 step motor with EL7041 (rev22) drive. With motor i've also the incremental encoder (05.2420.1230.0200.5009). I can correctly move the motor in "Position controller" operating mode with the internal counter. The problems start when i set the Encoder in feedback type or i change the operating mode. Does anyone have experience with these two terminals and can give me some advice of main parameters to check or change? Thanks everyone
Last updated: 2024-12-11

Post by aliazzz on Runtime licenses not detected => DEMO Mode 2hour ^{CODESYS Forge talk (Post)}
Hi! After upgrading all my licensed runtimes to V4.14.0.0 (= RaspberryPi SL, LinuxSL and ControlWin x64 SL) I found out via the logfiles they all defaulted back into DEMO mode while all runtimes have a USB dongle inserted. So, my main question is how I can get the Dongle license detected? I use License Server 4.14.0.0 and Edge Gateway 4.14.0.0 on all platforms Any suggestions are welcome.
Last updated: 2024-12-15

Sort by relevance or date