Post by leon78 on Codesys 3.5 SP17 Patch 2 CheckBounds (POUs for Implicit Checks) ^{CODESYS Forge talk (Post)}
Hello! I use CheckBounds (POUs for Implicit Checks). But I have a problem. I use an array as an VAR_IN_OUT of Function Block. If I try to monitor the array of variable length ([* ]), its does't work. The CheckBounds POU isn't called. If I use the array of fixed lenght ([lower..upper]), the CheckBounds POU is called. Why?
Last updated: 2023-11-14

Post by vformanek on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
Hey, I am facing the same problem. Basically UA Expert and other programs work fine with the login credentials. But codesys can not use them properly. I can see the server login to it manually but when I download the program and run the datasource never runs... Currently I am facing the same Error ID: 7012 and cant get it running properly.
Last updated: 2023-11-21

Post by nathant on Running webvisu with Codesys Control Win V3 in Simulation Mode ^{CODESYS Forge talk (Post)}
Hello - I was wondering if I can run a webvisu in Codesys V3.5 SP 18 when using the Control Win V3 soft PLC. I don't see anything saying I can't do this, but I haven't been able to access the webvisu using conventional methods. Thanks.
Last updated: 2023-11-28

Post by nathant on Running webvisu with Codesys Control Win V3 in Simulation Mode ^{CODESYS Forge talk (Post)}
Hello - I was wondering if I can run a webvisu in Codesys V3.5 SP 18 when using the Control Win V3 soft PLC. I don't see anything saying I can't do this, but I haven't been able to access the webvisu using conventional methods. Thanks.
Last updated: 2023-11-28

Post by jvfred on Display problems on Weintek's cMT3092x HMI ^{CODESYS Forge talk (Post)}
Hello, I have the same issue with my cMT display. I know it's a communications issue with my Eurotherm E+PLC400 PLC using the Codesys V3 driver. Were you ever able to figure out what the problem was and if so, what was your fix. Any help would be greatly appreciated.
Last updated: 2023-12-01

Post by chirag on About byte swap and convert into 16 bits ^{CODESYS Forge talk (Post)}
Hello, I have %QB0 8 high bits and %QB1 8 low bits . How can i swap bits %QB0 and %QB1 for requirment positions in a 16-bit value ? after that i need %QB0 and %QB1 in to 16bits . For that, i need help. Please see attached pictures for your reference. Thanks in advance.
Last updated: 2023-12-04

Post by mybackingtracks on CODESYS 3.5 SP19 Patch 5 - missing Raspberry PI tab ^{CODESYS Forge talk (Post)}
Hello, I have two virtual machines. One with CODESYS 3.5 SP19 Patch 5 installed, and second with CODESYS 3.5 SP19 Patch 1 installed. On Virtual Machine with Patch 5, I cannot to find Raspberry PI Tab witch I have visible on CODESYS with Patch 1. How can I turn it on? Thanks in advance for any feedback.
Last updated: 2023-12-05

Post by ulad on SPI Communication ^{CODESYS Forge talk (Post)}
Hello. I created a project that uses SPI. This project is working well. I can see with an oscilloscope that the SPI pins are actually changing. But when I resave this project in the IDE and open it later in the system, I see a constant error. What do I need to fix? What am I doing wrong? Thank you.
Last updated: 2023-12-23

Post by svn123 on In Simulation Mode, logic is not executing ^{CODESYS Forge talk (Post)}
I stopped the simulation and tried to rebuild. "Cloned Task0.task0. Priority already in use" error was shown after rebuilding. I used Build-Clean All option and rebuilt again. Now the logic started working. But I am not still sure what caused the error in first place. If somebody knows about this error, please enlighten me. Thanks svn
Last updated: 2023-12-25

Post by anderson on function block output ^{CODESYS Forge talk (Post)}
so it is not possible for me to use the function blocks and through them I can select the digital outputs of the PLC so that pulses and direction are output, or some function block that does this reading and in it I can program the pulse and direction outputs for the drive?
Last updated: 2024-01-09

Post by oscardm on Problem install codesys 3.5.17 SP 30 with Codesys Installer ^{CODESYS Forge talk (Post)}
Hi, I have a problem with codesys installer: if install a package on the codesys 3.5.17 SP17, and i try to install a package, for example SVN package, the codesys installer report the "digital signature expired error". Anyone have an idea for resolution ? Thanks for your feedback
Last updated: 2024-01-12

Post by hfelek on *SOURCEPOSITION* App = [Application] area=0, offset = 0 on default example ^{CODESYS Forge talk (Post)}
Hello, I am trying to run CmpTemplate component provided by Codesys for version 3.5.17. I call MyExternalFunction from the component but I get error as shown below. I see component is loaded successfully on runtime logs. I feel like I am missing something basically.
Last updated: 2024-01-15

Post by smartcoco on Add visual background FB blocks. ^{CODESYS Forge talk (Post)}
Can you add a background FB block to the visualization page, and loop through this FB block when the page is in display mode. This FB block requires two more functions, one for executing when the page is displayed and the other for executing when the page is closed.
Last updated: 2024-01-16

Post by fcmtw on SDO generation ^{CODESYS Forge talk (Post)}
Hi, When I'm adding a CANOpen device in my WAGO CANOpen Manager, CODESYS automaticaly generates some SDO's that I can't directly disable. From what those SDO's are generated ? I'm not finding anything about it in the EDS files. Also, is there a way to disable the automaticaly generated SDO and execute the manualy created ones ? Regards, Florian
Last updated: 2024-01-23

Post by rkohser on Python Script for Finding "Last saved with" Value ^{CODESYS Forge talk (Post)}
Hi jkilburn, I have the exact same issue and thought I would search a solution on this forum. I see you did not get any answer, did you find a solution on how to extract the last saved version of codesys from the project file ? Roland
Last updated: 2024-01-29

Post by nano on Modbus TCP/IP slave communication errow ^{CODESYS Forge talk (Post)}
please tell us the exact error message from diagnostic. U can view it at devicetree in the node-element diagnostic from modbus-configuration. u also can activate the function auto-reconnect in master and increase a little bit the timeout and the repetition to male thw communication a little bit more robust
Last updated: 2024-02-04

Post by ronaldcom-pac on Gif in WebVisu ^{CODESYS Forge talk (Post)}
I am looking for some help with using Gifs in the WebVisu of codesys 3.5.18.40 as the model we tried with ladder logic does not animate the Gif and leaves as the first image of the Gif. Is there a way for ST or LL for it to be animated?
Last updated: 2024-02-08

Post by mondinmr on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
Thank you for the response! It's a path I had already considered, however, while it has always worked for me on inputs, it doesn't on outputs, because if I enable the option to update all IOs at every scan, the IO tasks overwrite each other. However, I have found something very interesting which I am posting below.
Last updated: 2024-02-13

Post by gurkan on OPCUA array max length? ^{CODESYS Forge talk (Post)}
We are using codesys 3.5.16.30 and we have a array with strings of length 5000. We are having issues subscribing to this variable from an OPCUA client. Is there any limit in the OPCUA Server in codesys for how long an array can be on the opcua server?
Last updated: 2024-02-16

Post by dav3 on Exception auf Raspberry, CMCommCycleTask Tainted ^{CODESYS Forge talk (Post)}
Hello, I don't really know what my problem was, but it's working for me at the moment. All i did was to change my code because of some REAL_TO_INT conversions, like i wrote above. And later a complete new Pi setup (because of 64x support with 4.10.0.0 now).
Last updated: 2024-02-16

Post by durstloescher on Library Documentation DocScripting ^{CODESYS Forge talk (Post)}
Hi, I am currently creating a documentation for our library with DocScripting. In the process, I noticed that Visu images are created before the merge and transform, i.e. "screenshots" of the different Visus. Unfortunately, these are not used in the later process (Merge/Transform). Is there a way to set it up so that they are found in the html file?
Last updated: 2024-02-19

Post by reinier-geers on SysFileOpen does not work after update to V3.5 SP19 Patch 5 ^{CODESYS Forge talk (Post)}
At 19.1 the hFile_test should be RTS_IEC_HANDLE and always open-write - close in one cycle udi_handle: RTS_IEC_HANDLE; //handle-number. Is created by SysFileOpen udi_handle:=SysFileOpen(sFileName,Sysfile.AM_WRITE_PLUS, ADR(udi_ErrorCode)); udi_RetValWrite:=SysFileWrite(udi_handle, pRemBuffer, szRemBufSize, ADR(udi_ErrorCode)); //closing file IF udi_RetValWrite < szRemBufSize THEN ui_Error:=cWriteError; END_IF//error writing data udi_ErrorCode_Close:=SysFileClose(udi_handle);
Last updated: 2024-02-19

Post by alexgooi on Init Array input on a method ^{CODESYS Forge talk (Post)}
Dear Forum, I would like to initialize an array input on a method. When I do this, I get the following error: "The type of ARRAY [1..2] OF BOOL cannot have a default value in this context." I attached a picture for more clarity. Is this simply not possible or is there a different way of tackling this problem? Thank you in advance
Last updated: 2024-02-26

Post by jaspergain on SoftMotion Axes issue ^{CODESYS Forge talk (Post)}
Dear, We have an issue with SoftMotion and it's licensing. We don't use SoftMotion in this project. But a SoftMotion license is required by it. The License metrics tell's us there is a -1 Axes. Is there a way to reset this? Delete this? There was a MotionControl device in the project, but we have deleted this. But it stayed at -1. Thanks for you help.
Last updated: 2024-02-29

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Hello dear colleagues. I have an ESTUN PRONET servo. I'm trying to control via softmotion over the CANopen bus. There is no Ethercat bus in this servo model. In another project,using Ethercat , I controlled four axes. I have problems with ESTUN PRONET servos. A DSP-402 driver mismatch is likely. I would be very grateful for your help in solving this problem.
Last updated: 2024-03-10

Sort by relevance or date