Post by ivanmaltar on Codesys Control shutdown ^{CODESYS Forge talk (Post)}
Hello, the problem was that the 4.6.0.0 Codesys control was not compatible with S versions of the RevPi controller because of the becuase of the Compute Module 4S. For those controllers, 4.8.0.0 version must be used.
Last updated: 2024-03-25

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dgdamt on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
Hello, In my case all was ok on the BeagleBone side (OPC server) but wrong on the client side (was OK with UA Expert who manage properly its own certificates. I finnaly removed all security settings
Last updated: 2024-04-16

The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Thread)}
The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array.
Last updated: 3 days ago

Post by felipemsgarcia on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello, Thank you for your answer. I'm afraid I was not clear on what I was trying to achieve. I'm trying to change parameters and command axes from inside a function block and the first thing that came to my mind was pass both the EtherCAT slave and axis to the function block (as image attached). But, I believe it's worse than just pass directly the EtherCAT slave address to the function block (is it???). However I was wondering if there was a way to get the EtherCAT address directly from the axis, so I don't need to pass the EtherCAT slave nor the EtherCAT address to the function block. Thank you again!
Last updated: 2025-03-07

Post by docker on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
Hi mate, With this snippet i was able to see the lastusage variable count, but it would not iterate between clients? i was only able to access the data of the target visu. it threw an error with the array of pointers stating it was not able to convert etc. also when i tried it with the while loop it created an endless loop and crashed the program. any ideas? Thankyou
Last updated: 2024-09-10

Post by dkugler on TargetVisu Freezing ^{CODESYS Forge talk (Post)}
The only weird situation i remeber with particular or complete frozen target visu was after the rtc clock was fallen or set back to the past. It looked like after running a while the alarm history database crashed during writing entries at a date lot of years in the past. After setting the rtc clock to actual date/time and deleting the alarm db every thing worked fine. I don't know, if this is/was a problem of our PLC hardware/firmware? Maybe check date/time at your system?
Last updated: 2024-09-13

Post by camilloo on Control for Linux SL on Ubuntu Core ^{CODESYS Forge talk (Post)}
(dhumphries) I followed your advice and tried it on Ubuntu Server. Was a good choice. Your material was also very helpful :). Thanks for Your help! I no longer have problems connecting to Ubuntu. However, I still cannot install Virtual PLC. I'm currently getting a missing path message: "C:\Program Files\CODESYS 3.5.19.60\CODESYS\CODESYS Virtual Control for Linux SL\Delivery\virtuallinux\VirtualControlAPI.py." It looks as the package: "CODESYS Virtual Control for Linux SL" was not installed. But, there isn't one in CODESYS Store or I'm doing something incorrectly.
Last updated: 2024-03-03

Post by eschwellinger on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
think this will be solved with 4.3.0.0 version.- sorry i was wrong with this..4.4.0.0
Last updated: 2023-08-28

Post by dhumphries on install codesys runtime on linux ^{CODESYS Forge talk (Post)}
Adding the command worked. I was able to deploy the runtime on an ubuntu server installation. Thanks!
Last updated: 2023-11-04

Post by imdatatas on Detecting if a client is connected to webvisu server ^{CODESYS Forge talk (Post)}
Thank you @dgirard Your idea and above description helped me what i was looking for.
Last updated: 2023-11-08

Post by thommy54 on CODESYSControl_User cfg richtig konfigurieren ^{CODESYS Forge talk (Post)}
Und was ist mit dem Abschnitt [SysFile] ? Kann der sowohl in der /etc/CODESYSControl.cfg als auch in der /etc/CODESYSControl_User.cfg vorhanden sein ???
Last updated: 2024-07-02

Post by jnoyau on Visualisaion while in simulation ^{CODESYS Forge talk (Post)}
For anyone reading this after the fact, it seems my issue was Alarm Task Manager. Deleting it from my program fixed the issue.
Last updated: 2024-08-02

Post by trusty-squire on How to revert to previous version library ^{CODESYS Forge talk (Post)}
Turns out the issue was user error, no need to revert libraries.
Last updated: 2024-09-06

Post by zatalian on Visualization Toolbox in German ^{CODESYS Forge talk (Post)}
Is there a solution for this problem? Same here where the OS language was french during the installation of codesys (SP20 Patch2)
Last updated: 2024-09-26

Post by liamb on Unable to add alarm configuration object to project ^{CODESYS Forge talk (Post)}
Yep that was the case, PLC didn't support it.
Last updated: 2024-09-27

Post by joep on Creating Custom Kinematics ^{CODESYS Forge talk (Post)}
"* Do you return a valid rotation matrix f.mR (SMC_Matrix3) in AxesToCartesian()?" This was the issue, thanks a lot
Last updated: 2024-09-27

Post by ballen on Using Codesys 3.5 with Wago 750-8202 ^{CODESYS Forge talk (Post)}
Any chance you remember the specific library that was causing this issue.
Last updated: 2024-10-14

Sort by relevance or date