Post by jasperclauwaert on Persistent Retain Variables Not Visible in Online View (WAGO PFC100 + CODESYS) ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on a WAGO PFC100 with CODESYS. During development everything worked fine, but in the final stage I set several variables to PERSISTENT RETAIN. When I go online, most of these persistent variables cannot be monitored. Instead, I see: <Value of the expression cannot be retrieved> Interestingly, a few variables do show their values correctly, but the majority do not. The variables are not used as pointers or in any unusual way. The application compiles and runs without errors. Has anyone experienced this before? Is this a known issue with PFC100 or CODESYS? Any ideas on what could cause this behavior? Thanks in advance! Jasper
Last updated: 2025-10-23

Post by ophelia on Phantom Test Slot Preventing Suite Completion ^{CODESYS Forge talk (Post)}
Hi all, I'm working with a CODESYS 3.5 unit test framework on an embedded Linux PLC and running into an issue where a phantom test slot appears in the results that never completes, preventing the full test suite from ever finishing. The symptom: A blank-named test entry appears in the results table with an ever-increasing action count. It stays as "Testing" or "Failing" indefinitely. Because it never closes, bAllFinished never goes TRUE and the final report is never generated. Question: Has anyone seen this kind of phantom slot issue in a CODESYS unit testing setup? Thanks
Last updated: 2026-07-09

Post by wollvieh on Raspberry Pi Runtime 4.22.0.0 vs. 4.20.0.0 I2C Bus not running... ^{CODESYS Forge talk (Post)}
Hi together, -> I updated my raspberry pi3 with runtime 4.22.0.0, and then no I2C device is running. -> when i switch back to runtime 4.20.0.0 all I2C devices running. what have i additionally to do, so that I2C Bus is although running in the newest Runtime Version 4.22.0.0 ? I did read something about security changes on the new runtime Version, but i do not clear understand, what i have do do, do bring the I2C Bus to live again ? ... there should be a Dialog in the Runtime Deploy tool, (see the link below) , but im my Codesys Version 3.5.22.40 i could not find this "Change Service User button" ... https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_linux_dedicated_user.html strange things happen, so what to do, any Ideas appreciated !
Last updated: 2026-10-15

Post by eschwellinger on Problems connecting to Codesys 4.9.0.0 runtime on my Wago PFC200 ^{CODESYS Forge talk (Post)}
I've send out a workaround for this.. Best Regards Edwin
Last updated: 2023-08-26

Post by eschwellinger on CODESYS Automation Server Connector for 3.5 SP11 ^{CODESYS Forge talk (Post)}
https://store.codesys.com/en/codesys-automation-server-connector.html Programming System CODESYS Development System V3.5.15.0 or higher
Last updated: 2023-08-30

Post by janderson on Ethercat scan for devices not picking up EL7041 as a softmotion axis ^{CODESYS Forge talk (Post)}
also my ethercat bus won't run.
Last updated: 2023-09-02

Post by jegerjon on VPN ^{CODESYS Forge talk (Post)}
Hi, witch VPN provider for remote PLC Acess do you use/recomend? Preferedbly one where you can Grant certain users acess to specific controllers.
Last updated: 2023-09-06

Post by jegerjon on VPN ^{CODESYS Forge talk (Post)}
Hi, witch VPN provider for remote PLC Acess do you use/recomend? Preferedbly one where you can Grant certain users acess to specific controllers.
Last updated: 2023-09-06

Post by jegerjon on VPN ^{CODESYS Forge talk (Post)}
Hi, witch VPN provider for remote PLC Acess do you use/recomend? Preferedbly one where you can Grant certain users acess to specific controllers.
Last updated: 2023-09-06

Post by eschwellinger on Project compiling error in Simulation mode ^{CODESYS Forge talk (Post)}
I fear you need to update if you need a solution for this.
Last updated: 2023-09-08

Post by imdatatas on Detecting if a client is connected to webvisu server ^{CODESYS Forge talk (Post)}
Thank you @dgirard Your idea and above description helped me what i was looking for.
Last updated: 2023-11-08

Post by pflot59 on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
You can find a guide here : https://techdocs.wago.com/Software/eCOCKPIT_Migration/en-US/index.html
Last updated: 2023-11-21

Post by pflot59 on Migration von "CODESYS Control for PFC200 SL" zu WAGO FW26 "CODESYS V3.5.19.2" ^{CODESYS Forge talk (Post)}
You can find a guide here : https://techdocs.wago.com/Software/eCOCKPIT_Migration/en-US/index.html
Last updated: 2023-11-21

Post by wbj0t on connect IDE to plc that uses modem ppp ^{CODESYS Forge talk (Post)}
Thanks for reply. I did all understand, thanks you :)
Last updated: 2024-07-01

Post by hyys12 on How to use/create SOTU in LD program ^{CODESYS Forge talk (Post)}
Yes. R_TRIG and F_TRIG works exactly like needed for this.
Last updated: 2024-07-11

Post by strannik on SoftMotion SML ^{CODESYS Forge talk (Post)}
Good afternoon. Thank you colleagues for your responsiveness and willingness to help. I've already figured it out.
Last updated: 2024-07-15

Post by pazderai on CanOpen write issue ^{CODESYS Forge talk (Post)}
Anyway, any idea how to get command byte 0x22 for sdo write if I use codesys cia405 canopen library?
Last updated: 2024-07-16

Post by eschwellinger on TargetVisu on Raspberry? ^{CODESYS Forge talk (Post)}
install this: https://store.codesys.com/de/codesys-targetvisu-for-linux.html via CODESYS Installer and deploy it by update command
Last updated: 2024-07-26

Post by mrbartpawlowski on OMAC PackML library 1.0.04 ^{CODESYS Forge talk (Post)}
Hi, I have this project and library. I don't have documentation . I'm sure there has to be one for it.
Last updated: 2024-08-16

Post by eschwellinger on Step motor ECT60 Ethercat in codesys 3.5 ^{CODESYS Forge talk (Post)}
for Control Win you need to have installed Npcap https://www.winpcap.org then it will work
Last updated: 2024-08-16

Post by gilbertamine on Comparing Arrays of structure ^{CODESYS Forge talk (Post)}
If I knew it was this simple... Exactly what I was looking for ! Thanks you very much.
Last updated: 2024-08-23

Post by soulplox on Python API for GIT extensions ^{CODESYS Forge talk (Post)}
you might want to take a look at https://content.helpme-codesys.com/en/CODESYS%20Git/_git_using_scripting.html
Last updated: 2024-09-03

Post by sinameshksar on TCP Socket Client ^{CODESYS Forge talk (Post)}
Hello I'm looking for a TCP socket client project example. Can you assist?
Last updated: 2024-09-11

Post by lsislsis on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hello. Is there any way to set placeholder for Alarms Storage at Usb Flash Disk? Regards
Last updated: 2024-10-03

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Your right, much easier with Linux control SL ARM. Everything is working.
Last updated: 2024-10-24

Sort by relevance or date