Post by timvh on Automatic xExecute NBS.TCP_write
CODESYS Forge
talk
(Post)
Use e.g. the condition: TCP_Connection_0.xActive AND NOT(TCP_Write_0.xDone)
Last updated: 2024-03-05
Post by eschwellinger on Estun servo with codesys
CODESYS Forge
talk
(Post)
you need to add the EDS file here to check..
Last updated: 2024-03-11
Post by mp9876 on Device User Logon
CODESYS Forge
talk
(Post)
Just adding some info regarding the issue above. Logged onto the project using dev3og5 user (see screenshots); appeared to be ok although when attempting to logon to the device message says 'currently not authorized to perform this operation on the device' (screenshot). If user dev3og5 has same permissions as Owner user; why would it not be authorized. I am at a loss; any assistance would greatly be appreciated. Thank you Mike
Last updated: 2024-03-16
Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023
CODESYS Forge
talk
(Post)
Hi everybody We are currently working on a project with an RS232 serial COM interface and using the CAA SerialCOM library. We have it working fine reading and writing data, although we have found an issue we cannot resolve and any suggestions would be helpful. We have noticed that after a while the RS232 stops working. We have tracked this down to the HANDLE hCom keeps increasing and when this reaches 1023 the COM returns an unknown error "5003". Is there a way to reset this hCom reference? Thanks Richard
Last updated: 2024-03-22
Post by remcoborghuis on C0032 Error to type Pointer to IoConfigParameter
CODESYS Forge
talk
(Post)
Hi All, I'm using codesys on a raspberry PI. I use V3.5 SP18 Patch 2 development system and codesys for raspberry pi 4.8.0.0. Sometimes when I build the project I get error messages C0007: Expression expected instead of ',' and C0032: Cannot convert type 'Unknow type: '!!!'ERROR'!!!" to type 'POINTER TO IoConfigParameter'. I can't click on the message to bring me to the fault. After I do a "Clean all" the build finishes successful. Anyone who can help me with this problem? Thanks! Remco Borghuis
Last updated: 2024-03-25
Post by gabrielmorte on License problem gateway
CODESYS Forge
talk
(Post)
Hi, did you get it to work? I'm having the same problem.
Last updated: 2024-03-30
Post by danieldiaz on Problem with FB execution
CODESYS Forge
talk
(Post)
Problem Solved, I was overwriting the variables somewhere else
Last updated: 2024-04-05
Post by flavinhofh on Beaglebone Black OPC-UA Server
CODESYS Forge
talk
(Post)
what was the solution guys ?
Last updated: 2024-04-10
Post by flavinhofh on Beaglebone Black OPC-UA Server
CODESYS Forge
talk
(Post)
what was the solution guys ?
Last updated: 2024-04-10
Post by flavinhofh on Beaglebone Black OPC-UA Server
CODESYS Forge
talk
(Post)
what was the solution guys ?
Last updated: 2024-04-10
Post by reinier-geers on License problem gateway
CODESYS Forge
talk
(Post)
It doesnt see the dongel on my computer
Last updated: 2024-04-11
Post by yongchaow on Can't connect to Device Raspberry Pi 4 from CODESYS IDE V3.5 SP19
CODESYS Forge
talk
(Post)
Hi, eschwellinger, I have the same problem, but I can not resolve the problem following this forum. There are my situation: pi@RevPiXXXX:~ $ uname -a Linux RevPiXXXX 5.10.120-rt70-v7l #1 SMP PREEMPT_RT Thu, 28 Jul 2022 10:36:48 +0200 armv7l GNU/Linux After "top": It looks like runtime is not running. One more piece of information to refer to, when I reboot the device it is possible to scan the device. Looking forward your reply.
Last updated: 2024-04-25
Post by dhumphries on Trouble installing codesys 64 3.5.19.0
CODESYS Forge
talk
(Post)
Are you running the installer with admin privileges?
Last updated: 2024-04-28
Post by hezhikui on Kalman Filter
CODESYS Forge
talk
(Post)
hi,Matteo i find an article,it maybe helpful. see the attachement Hezk
Last updated: 2024-05-05
Post by installwhat on Camera Feed (CCTV)
CODESYS Forge
talk
(Post)
https://www.youtube.com/watch?v=y_l2siXY7dA check the project from this video
Last updated: 2024-06-23
Post by vtec35 on search runtime 4.9.0.0 for pi 3
CODESYS Forge
talk
(Post)
if you prefer i can share the project directly
Last updated: 2025-10-26
Post by mg0815 on ERROR: Calling the program "AlarmStorage_Prg" is not allowed from multiple tasks
CODESYS Forge
talk
(Post)
...
Last updated: 2025-11-04
Post by r-c-r on SM3RaspiStepper 0.0.0.6 issue
CODESYS Forge
talk
(Post)
Version 0.0.0.7 - still the same problem. Any updates?
Last updated: 2025-12-05
Post by nguyenkhoi on Ethercat Servo Setup
CODESYS Forge
talk
(Post)
You can buy a license on the store!
Last updated: 2026-01-10
Post by spoun on RaspberryPi 5 gateway problem
CODESYS Forge
talk
(Post)
I have the same issue, has anyone found a possible solution?
Last updated: 2026-03-27
Post by reinier-geers on Monitor active Codesys connection
CODESYS Forge
talk
(Post)
HI, did you find the solution ?
Last updated: 2026-03-29
Post by gseidel on Mismatch between coordinate monitor and actual motion using SMC_GroupJog2, MC_MoveLinearAbsolute (6DOF)
CODESYS Forge
talk
(Post)
Dear darwin03, my first guess is that the axis scaling of the last axis (joint 6) is not correct. It should be confiugured so that one technical unit equals one angular degree. From the video, it rather looks like 1 technical unit is a full revolution of the joint. (This holds for all rotary axes used with SoftMotion Robotics: they must be scaled so that one technical unit equals one angular degree.) Best regards, Georg
Last updated: 2026-04-07
Post by suyash on Device User Logon
CODESYS Forge
talk
(Post)
Thanks for your reply @eschwellinger. Update : the is problem is resolved. It was done by renaming the User database file (/var/opt/codesys/.UserDatabase.csv) as deleting it was risky. After restart the IDE asked me to create new user. On doing that the problem got resolved. Reference for members facing similar problem/s : sudo systemctl stop codesyscontrol sudo mv /var/opt/codesys/.UserDatabase.csv_ /var/opt/codesys/.UserDatabase.csv_.old sudo systemctl start codesyscontrol
Last updated: 2026-05-14
Automation Server π¬π§
CODESYS Forge
talk
(Discussion)
The Industry 4.0 administration platform for users and operators of CODESYS compatible controllers
Last updated: 2026-06-16
Post by nicolasquintin on Codesys Installation Always Freeze when the installing is almost done
CODESYS Forge
talk
(Post)
Indeed that worked, thanks!
Last updated: 2026-04-05
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.