Post by vincentd on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
the target is the codesys software executing the PLC code like ladder / instruction list etc...
Last updated: 2024-04-05

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Last updated: 2024-04-07

Post by mmpl on Array of UDT Compare ^{CODESYS Forge talk (Post)}
Hi I am trying to compare value of Array. I am getting an error. I attached picture. Please help.
Last updated: 2024-04-08

Post by bouadel on Trend recording build error - the variable "arrTraceMgrVariablesImpl" is too large ^{CODESYS Forge talk (Post)}
Hello do you find a solution ? I have the same Kind regards Adel
Last updated: 2024-04-09

Post by eschwellinger on Identifier 'IoDrvGPIO' not defined ^{CODESYS Forge talk (Post)}
it is just a precompiler error, login an start the application. Works.This will be fixed hopefully to next version.
Last updated: 2024-04-10

Post by ademarvribeiro on Could not be resolved - Library error ^{CODESYS Forge talk (Post)}
Hello. Did you try delet this library and rebuild the Project?
Last updated: 2024-04-12

Post by rmaas on Fieldbus has lost synchronicity ^{CODESYS Forge talk (Post)}
Thanks for the suggestions! It seems that increasing the value DCInSyncWindow helped, running without error for 1/2 day now.
Last updated: 2024-04-15

Post by installwhat on raspistepper error after install ^{CODESYS Forge talk (Post)}
I'm digging into it and see that sm3_shared is nested in the library manager raspistepper->sm3_drive_poscontrol->sm3_shared but I get errors
Last updated: 2024-04-20

Post by ademarvribeiro on Could not be resolved - Library error ^{CODESYS Forge talk (Post)}
Hello, send me your project pleaese. i'll try open in my laptop. Ademar.ribeiro1985@gmail.com.
Last updated: 2024-04-29

Post by k2saki on CNC Override speed. SMC_Interpolator.dOverride is working ? ^{CODESYS Forge talk (Post)}
Sorry, That was my mistake. I found a error in my program. Now it works well.
Last updated: 2024-05-01

Post by eschwellinger on IoDrvModbusTCP_Diag not defined when using MODBUS ^{CODESYS Forge talk (Post)}
error need to be solved by CODESYS. hopefully next release
Last updated: 2024-05-01

Post by eschwellinger on Problems with Raspberry Pi - IoDrvGPIO library ^{CODESYS Forge talk (Post)}
this is only a precompile error, will be solved but you ignore it works without any problem
Last updated: 2024-05-14

Post by micik on CAA File- FILE_OPERATION_DENIED error ^{CODESYS Forge talk (Post)}
Thank you wollview, it is clear now, it is due to security reasons that access to the file system is restricted.
Last updated: 2024-05-16

Post by installwhat on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
same issue solved with this advice... thanks 3.5.19.5 project settings -> visualization -> advanced -...
Last updated: 2024-05-20

Post by ndzied2 on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
Ignore, was duplicate post. Can't find a way to delete it.
Last updated: 2024-05-24

Post by thisischris on "You are using inconsistent overlay settings, please check your compiler defines for the current application" error ^{CODESYS Forge talk (Post)}
Duplicate
Last updated: 2024-05-28

Post by kporter on High-resolution drive with SoftMotion ^{CODESYS Forge talk (Post)}
I'm beta-testing a new EtherCAT drive for a rotary (modulo) axis in a system where the encoder resolution is 81920000 counts per rotation. If I enter this in the SoftMotion Scaling/Mapping tab for "increments <=> motor turns", I get the error below on the Commissioning tab. Is SM unable to handle a high-resolution encoder? The bus cycle is currently set to the default of 4 msec (Control Win V3 x64), although I plan to reduce that to reduce latency, possibly by switching to the realtime (RT) master. Is SoftMotion incompatible with high-resolution encoders? SMC_CGR_INVALID_POSPERIOD Invalid modulo period (<= 0 or greater than half the bus bandwidth)
Last updated: 2025-08-25

Seeking a Code-Based Solution for EtherCAT Slave Dropout or Master Errors in Production (Beyond Software Hot Reset) ^{CODESYS Forge talk (Thread)}
Seeking a Code-Based Solution for EtherCAT Slave Dropout or Master Errors in Production (Beyond Software Hot Reset)
Last updated: 2025-07-18

Post by thisischris on "You are using inconsistent overlay settings, please check your compiler defines for the current application" error ^{CODESYS Forge talk (Post)}
Hello. I am a new user. On generating the first test project I am receiving this error message. You are using inconsistent overlay settings, please check your compilerdefines for the current application (-> GENERATE_OVERLAY_VISU) and the setting within the visualization manager. Can anyone help?
Last updated: 2024-05-28

Post by culius on How to reset AzureMQTTClient after error? ^{CODESYS Forge talk (Post)}
Hey Guys, is there any chance of direct reset of the AzureMQTTClient? When the Client runs in an error, I can not reset the client whit switch xEnable to off and on again. I always need to make a hard reboot. Any Ideas, or have someone else experienced this behavior? Kind Regards
Last updated: 2024-06-04

Post by micik on How to generate an "ENI" file ^{CODESYS Forge talk (Post)}
That really depends on this third party software you want to use. It is possible that .xml file generated with "Generate EtherCAT XML" will not be recognized as valid ENI file. Anyway, "Generate EtherCAT XML" command is not available through standard menus and needs to be added via Tools->Customize and then Add Command. You'll find it under "Devices" section. If you provide more info, we might be able to help you further.
Last updated: 2024-08-09

Post by timvh on Communication between applications on same device/controller/runtime (Win RTE 3.5.20.20) ^{CODESYS Forge talk (Post)}
The RTE will take the RTE license. The HMI will take the HMI license. For the Application Based Licenses, the Runtime will take the smallest which is required. So if you have an application running EtherCAT and no visualization, only the Control with support for EtherCAT is used. If you have another runtime which requires the visualization, it will take the smallest Control license which is required and available + the smallest visualization license which is required.
Last updated: 2024-10-01

Post by mtnkyr on Ethercat Master ^{CODESYS Forge talk (Post)}
Hi everyone, I am working on a 3 axes Cartesian robot. I take control of all the axes. In the Ethercat connection, the drive sequence is the same as in the program. For example, in the current program the order is as follows. 1. Axis_Z 2. Axis_X 3. Axis_Y Communication Diagram PLC->Drive_Z->Drive_X->Drive_Y When I try to change the order in the program while keeping the communication diagram the same, there is an axis drive mismatch. How can I fix this?
Last updated: 2024-10-22

Post by nchau on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I'm currently working on a project using Estun Pronet servo drives with EtherCAT communication, and I need the appropriate ESI (EtherCAT Slave Information) files to set up the network. The specific models I'm using are: Pronet-04AEG-EC Pronet-02AEG-EC-R1 Pronet-10AEG-EC-R1 Pronet-20AEG-EC-R1 Pronet-50DEA-EC-R1 If anyone has the ESI files for these models or knows where I can download them, I would greatly appreciate your help. Thank you in advance!
Last updated: 2025-09-26

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
All Sensors from the OneWire Master are assigned already to a seperate task with low prio (26) that runs with 1s cycle time. My EtherCat Task is running with Prio 1. It all works fine, until I adjust the CODESYScontrol.cfg or the CODESYScontrol_Usr.cfg files so that it supports a 2nd OneWire Master in the Codeys Runtime. If I change something in this config file and reboot my EtherCat Master stops working.
Last updated: 2025-10-19

Sort by relevance or date